Schedule 160 Pipe and ANSI Sch 160 Steel Pipe dimensions/ weight/ price

What is SCH 160 Pipe?

The schedule of a pipe helps in dictating the NPS of the pipe, its thickness, and outer diameter. SCH 160 pipe is the highest schedule in the piping industry. This allows the pipes from this schedule to have immense load-bearing capacity in stress-induced setups. These pipes are less common in the industry and are only used when there is a requirement for use in high pressure setups. The pipes range in size between 4 inches up to 24 inches in diameter. They can have a wall thickness between 11mm up to 46mm, and their lengths can vary from one application to the other. The thickness of the high-strength pipes can be slightly increased or decreased based on the material transmitted in the system.

Where to use Schedule 160 Steel Pipe?

Schedule 160 steel pipe is the highest rated pipe schedule in the industry. These steel pipes perform well in applications where there is a requirement for high-pressures and temperature movement of fluids and gases. They are designed to work in harsh environments for transmission of oil and gas, petrochemicals, thermal plants, high-pressure pumping, and fluid distribution units.

Alloy & Carbon Steel SCH 160 Pipe Size Chart as per ASME B36.10

Table of Contents

SCH 160 Pipe Pressure Rating
Sizes Of SCH 160 Seamless Pipe
Schedule 160 Pipe Weight Per Foot

Schedule 160 Pipe Tolerances
Schedule 160 Steel Pipe Price

Check weight, pressure rating, price and nominal wall thickness of Sch 160 Pipe and Schedule 160 Seamless Pipe

SCH 160 Pipe Pressure Rating

Maximum Allowable Pressure (psi) (kPa)
NPS	Outside Diameter	Schedule
(inch)	(inch) (milimeter)	10	20	30	STD	40	60	XS	80	100	120	140	160	XXS
1/4 Inch	0.54 Inch 13.7 milimeter				7985 55057	7985 55057		10798 74452	10798 74452
3/8 Inch	0.675 Inch 17.1 milimeter				6606 45548	6606 45548		9147 63069	9147 63069
1/2 Inch	0.84 Inch 21.3 milimeter				6358 43838	6358 43838		8575 59125	8575 59125				10908 75211	17150 118249
3/4 Inch	1.05 Inch 26.7 milimeter				5273 36357	5273 36357		7187 49554	7187 49554				10220 70467	14373 99102
1 Inch	1.315 Inch 33.4 milimeter				4956 34172	4956 34172		6670 45990	6670 45990				9316 64234	13340 91979
1 1/4 Inch	1.66 Inch 42.2 milimeter				4133 28497	4133 28497		5638 38874	5638 38874				7380 50885	11276 77748
1 1/2 Inch	1.9 Inch 48.3 milimeter				3739 25780	3739 25780		5158 35564	5158 35564				7247 49968	10316 71129
2 Inch	2.375 Inch 60.3 milimeter				3177 21905	3177 21905		4498 31014	4498 31014				7097 48934	8995 62021
2 1/2 Inch	2.875 Inch 73 milimeter				3460 23857	3460 23857		4704 32434	4704 32434				6391 44066	9408 64868
3 Inch	3.5 Inch 88.9 milimeter				3024 20850	3024 20850		4200 28959	4200 28959				6132 42280	8400 57918
3 1/2 Inch	4 Inch 102 milimeter				2769 19092	2769 19092		3896 26863	3896 26863
4 Inch	4.5 Inch 114 milimeter				2581 17796	2581 17796		3670 25305	3670 25305		4769 32882		5782 39867	7339 50602
5 Inch	5.563 Inch 141 milimeter				2273 15672	2273 15672		3303 22774	3303 22774		4404 30366		5505 37957	6606 45548
6 Inch	6.625 Inch 168 milimeter				2071 14280	2071 14280		3195 22030	3195 22030		4157 28663		5318 36668	6390 44059
8 Inch	8.625 Inch 219 milimeter		1420 9791	1574 10853	1829 12611	1829 12611	2307 15907	2841 19589	2841 19589	3375 23271	4085 28166	4613 31807	5147 35489	4971 34275
10 Inch	10.75 Inch 273 milimeter		1140 7860	1399 9646	1664 11473	1664 11473	2279 15714	2279 15714	2708 18672	3277 22595	3847 26525	4558 31427	5128 35358	4558 31427
12 Inch	12.75 Inch 324		961 6626	1268 8743	1441 9936	1560 10756	2160 14893	1922 13252	2644 18230	3244 22367	3843 26497	4324 29814	5042 34765	3843 26497
14 Inch	14 Inch 356	875 6033	1092 7529	1313 9053	1313 9053	1533 10570	2079 14335	1750 12066	2625 18099	3283 22636	3829 26401	4375 30166	4921 33930
16 Inch	16 Inch 406	766 5282	956 6592	1148 7915	1148 7915	1531 10556	2009 13852	1531 10556	2585 17824	3157 21768	3733 25739	4404 30366	4882 33661
18 Inch	18 Inch 457	681 4695	849 5854	1192 8219	1021 7040	1530 10549	2042 14080	1361 9384	2553 17603	3147 21699	3743 25808	4252 29318	4848 33427
20 Inch	20 Inch 508	613 4227	919 6337	1225 8446	919 6337	1455 10032	1989 13714	1225 8446	2526 17417	3138 21637	3675 25339	4288 29566	4824 33261
22 Inch	22 Inch 559	557 3841	835 5757	1114 7681	835 5757		1949 13438	1114 7681	2506 17279	3063 21119	3619 24953	4176 28794	4733 32634
24 Inch	24 Inch 610	510 3516	766 5282	1147 7909	766 5282	1405 9687	1978 13638	1021 7040	2489 17162	3126 21554	3700 25512	4210 29028	4786 32999
30 Inch	30 Inch 762	510 3516	817 5633	1021 7040	613 4227			817 5633
32 Inch	32 Inch 813	478 3296	766 5282	957 6599	574 3958	1054 7267
34 Inch	34 Inch 864	450 3103	721 4971	901 6212	540 3723	992 6840
36 Inch	36 Inch 914	425 2930	681 4695	851 5868	510 3516	1021 7040
42 Inch	42 Inch 1067		583 4020	729 5026	438 3020	875 6033

Sizes Of SCH 160 Seamless Pipe

NPS	1/2	3/4	1	1¼	1½	2	2½	3	3½	4
DN	15	20	25	32	40	50	65	80	90	100

Supplier and exporter of SCH 160 Pipe in API 5L, ASTM A106/ A53 Grade B, A333 Gr 6, A335 P22/ P11/ P9 material in India

Schedule 160 Pipe Weight Per Foot

Nominal size [inches]	Outside diameter [inches]	Outside diameter [mm]	Wall thickness [inches]	Wall thickness [mm]	Weight [lb/ft]	Weight [kg/m]
1/2	0,840	21,3	0,188	4,78	1,31	1,95
3/4	1,050	26,7	0,219	5,56	1,94	2,90
1	1,320	33,4	0,250	6,35	2,84	4,24
1 1/4	1,660	42,2	0,250	6,35	3,76	5,61
1 1/2	1,900	48,3	0,281	7,14	4,86	7,25
2	2,375	60,3	0,344	8,74	7,46	11,11
2 1/2	2,875	73,0	0,375	9,53	10,01	14,92
3	3,500	88,9	0,438	11,13	14,32	21,35
4	4,500	114,3	0,531	13,49	22,51	33,54
5	5,563	141,3	0,625	15,88	32,96	49,11
6	6,625	168,3	0,719	18,26	45,35	67,56
8	8,625	219,1	0,906	23,01	74,69	111,27
10	10,750	273,0	1,125	28,58	115,64	172,33
12	12,750	323,8	1,312	33,32	160,27	238,76
14	14,000	355,6	1,406	35,71	189,11	281,70
16	16,000	406,4	1,594	40,49	245,25	365,35
18	18,000	457,0	1,781	45,24	308,50	459,37
20	20,000	508,0	1,969	50,01	379,17	564,81
22	22,000	559,0	2,125	53,98	451,06	672,26
24	24,000	610,0	2,344	59,54	542,13	808,22

NPS	DN (dimensionless)	Outer Dia [in (milimeter)]	Wall thk [in (milimeter)]
NPS	DN (dimensionless)	Outer Dia [in (milimeter)]	Schedule 5s	Schedule 10s/20	Schedule 30	Schedule 40s/40 /STD	Schedule 80s/80 /XS	Schedule 120	Schedule 160	XXS
1½	40	1.900 (48.26)	0.065 (1.651)	0.109 (2.769)	0.125 (3.175)	0.145 (3.683)	0.200 (5.080)	—	0.281 (7.137)	0.400 (10.160)
2	50	2.375 (60.33)	0.065 (1.651)	0.109 (2.769)	0.125 (3.175)	0.154 (3.912)	0.218 (5.537)	0.250 (6.350)	0.344 (8.738)	0.436 (11.074)
2½	65	2.875 (73.03)	0.083 (2.108)	0.120 (3.048)	0.188 (4.775)	0.203 (5.156)	0.276 (7.010)	0.300 (7.620)	0.375 (9.525)	0.552 (14.021)
1/8	3	0.405 (10.29)	0.035 (0.889)	0.049 (1.245)	0.057 (1.448)	0.068 (1.727)	0.095 (2.413)	—	—	—
¼	6	0.540 (13.72)	0.049 (1.245)	0.065 (1.651)	0.073 (1.854)	0.088 (2.235)	0.119 (3.023)	—	—	—
3/8	10	0.675 (17.15)	0.049 (1.245)	0.065 (1.651)	0.073 (1.854)	0.091 (2.311)	0.126 (3.200)	—		—
1/2	15	0.840 (21.34)	0.065 (1.651)	0.083 (2.108)	0.095 (2.413)	0.109 (2.769)	0.147 (3.734)	—	0.188 (4.775)	0.294 (7.468)
3/4	20	1.050 (26.67)	0.065 (1.651)	0.083 (2.108)	0.095 (2.413)	0.113 (2.870)	0.154 (3.912)	—	0.219 (5.563)	0.308 (7.823)
1	25	1.315 (33.40)	0.065 (1.651)	0.109 (2.769)	0.114 (2.896)	0.133 (3.378)	0.179 (4.547)	—	0.250 (6.350)	0.358 (9.093)
1¼	32	1.660 (42.16)	0.065 (1.651)	0.109 (2.769)	0.117 (2.972)	0.140 (3.556)	0.191 (4.851)	—	0.250 (6.350)	0.382 (9.703)
3	80	3.500 (88.90)	0.083 (2.108)	0.120 (3.048)	0.188 (4.775)	0.216 (5.486)	0.300 (7.620)	0.350 (8.890)	0.438 (11.125)	0.600 (15.240)
3½	90	4.000 (101.60)	0.083 (2.108)	0.120 (3.048)	0.188 (4.775)	0.226 (5.740)	0.318 (8.077)	—	—	0.636 (16.154)

Schedule 160 Pipes Documentation

WPS/PQR, Welding Procedure Qualification Record,
Form A for the purposes of the Generalized System of Preferences (GSP)
Commercial Invoice which includes HS Code
Test Certificates certifying NACE MR0175/ MR0103
Test Reports of Raw Material
as per EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
Fumigation Certificates
NABL approved Laboratory Test Reports
Material Traceability Records
Quality Assurance Plan (QAP)
Guarantee Letter
Heat Treatment Charts

Stockist and manufacturer of Schedule 160 Welded Pipe and ANSI SCH 40 ERW Line Pipe for oil transportation

Schedule 160 Pipe Tolerances

NPS 4 to NPS 9

NPS	DN	outer Dia [in (milimeter)]	Wall thk [in (milimeter)]
NPS	DN	outer Dia [in (milimeter)]	Schedule 5	Schedule 10s/10	Schedule 20	Schedule 30	Schedule 40s/40 /STD	Schedule 60	Schedule 80s/80 /XS	Schedule 100	Schedule 120	Schedule 140	Schedule 160	XXS
7	−	7.625 (193.68)	−	−	−	−	0.301 (7.645)	−	0.500 (12.700)	−	−	−	−	0.875 (22.225)
4	100	4.500 (114.30)	0.083 (2.108)	0.120 (3.048)	−	0.188 (4.775)	0.237 (6.020)	−	0.337 (8.560)	−	0.437 (11.100)	−	0.531 (13.487)	0.674 (17.120)
4½	115	5.000 (127.00)	−	−	−	−	0.247 (6.274)	−	0.355 (9.017)	−	−	−	−	0.710 (18.034)
5	125	5.563 (141.30)	0.109 (2.769)	0.134 (3.404)	−	−	0.258 (6.553)	−	0.375 (9.525)	−	0.500 (12.700)	−	0.625 (15.875)	0.750 (19.050)
6	150	6.625 (168.28)	0.109 (2.769)	0.134 (3.404)	−	−	0.280 (7.112)	−	0.432 (10.973)	−	0.562 (14.275)	−	0.719 (18.263)	0.864 (21.946)
8	200	8.625 (219.08)	0.109 (2.769)	0.148 (3.759)	0.250 (6.350)	0.277 (7.036)	0.322 (8.179)	0.406 (10.312)	0.500 (12.700)	0.593 (15.062)	0.719 (18.263)	0.812 (20.625)	0.906 (23.012)	0.875 (22.225)
9	−	9.625 (244.48)	−	−	−	−	0.342 (8.687)	−	0.500 (12.700)	−	−	−	−	−

NPS 10 to NPS 24

NPS	DN	outer Dia [in (milimeter)]	Wall thickness [in (milimeter)]
NPS	DN	outer Dia [in (milimeter)]	Schedule 5s	Schedule 5	Schedule 10s	Schedule 10	Schedule 20	Schedule 30	Schedule STD/40S
18	450	18.00 (457.20)	0.165 (4.191)	0.165 (4.191)	0.188 (4.775)	0.250 (6.350)	0.312 (7.925)	0.437 (11.100)	0.375 (9.525)
20	500	20.00 (508.00)	0.188 (4.775)	0.188 (4.775)	0.218 (5.537)	0.250 (6.350)	0.375 (9.525)	0.500 (12.700)	0.375 (9.525)
10	250	10.75 (273.05)	0.134 (3.404)	0.134 (3.404)	0.165 (4.191)	0.165 (4.191)	0.250 (6.350)	0.307 (7.798)	0.365 (9.271)
12	300	12.75 (323.85)	0.156 (3.962)	0.156 (3.962)	0.180 (4.572)	0.180 (4.572)	0.250 (6.350)	0.330 (8.382)	0.375 (9.525)
14	350	14.00 (355.60)	0.156 (3.962)	0.156 (3.962)	0.188 (4.775)	0.250 (6.350)	0.312 (7.925)	0.375 (9.525)	0.375 (9.525)
16	400	16.00 (406.40)	0.165 (4.191)	0.165 (4.191)	0.188 (4.775)	0.250 (6.350)	0.312 (7.925)	0.375 (9.525)	0.375 (9.525)
22	550	22.00 (558.80)	0.188 (4.775)	0.188 (4.775)	0.218 (5.537)	0.250 (6.350)	0.375 (9.525)	0.500 (12.700)	0.375 (9.525)
24	600	24.00 (609.60)	0.218 (5.537)	0.218 (5.537)	0.250 (6.350)	0.250 (6.350)	0.375 (9.525)	0.562 (14.275)	0.375 (9.525)

NPS	DN	Wall thickness [in (milimeter)]
NPS	DN	Schedule 40	Schedule 60	Schedule 80s/XS	Schedule 80	Schedule 100	Schedule 120	Schedule 140	Schedule 160
18	450	0.562 (14.275)	0.750 (19.050)	0.500 (12.700)	0.937 (23.800)	1.156 (29.362)	1.375 (34.925)	1.562 (39.675)	1.781 (45.237)
20	500	0.593 (15.062)	0.812 (20.625)	0.500 (12.700)	1.031 (26.187)	1.280 (32.512)	1.500 (38.100)	1.750 (44.450)	1.968 (49.987)
10	250	0.365 (9.271)	0.500 (12.700)	0.500 (12.700)	0.594 (15.088)	0.718 (18.237)	0.843 (21.412)	1.000 (25.400)	1.125 (28.575)
12	300	0.406 (10.312)	0.562 (14.275)	0.500 (12.700)	0.687 (17.450)	0.843 (21.412)	1.000 (25.400)	1.125 (28.575)	1.312 (33.325)
14	350	0.437 (11.100)	0.593 (15.062)	0.500 (12.700)	0.750 (19.050)	0.937 (23.800)	1.093 (27.762)	1.250 (31.750)	1.406 (35.712)
16	400	0.500 (12.700)	0.656 (16.662)	0.5 (12.700)	0.843 (21.412)	1.031 (26.187)	1.218 (30.937)	1.437 (36.500)	1.594 (40.488)
22	550	—	0.875 (22.225)	0.500 (12.700)	1.125 (28.575)	1.375 (34.925)	1.625 (41.275)	1.875 (47.625)	2.125 (53.975)
24	600	0.687 (17.450)	0.968 (24.587)	0.500 (12.700)	1.218 (30.937)	1.531 (38.887)	1.812 (46.025)	2.062 (52.375)	2.343 (59.512)

ANSI/ ASME B36.10 Schedule 160 Carbon Steel Pipe and Sch 160 galvanized and black steel pipe chart, dimensions, sizes

Schedule 160 Steel Pipe Price

Description	Price List
Black and Galvanized Steel Schedule 160 Pipes	US $1100-$1200 / Ton
sch 160 carbon steel seamless pipes	US $690.00-$750.00 / Metric Ton
schedule 160 dn32 steel sch 80 galvanized pipes	US $490.00-$515.00 / Metric Ton

Schedule STD 160 Steel Pipe Stock

Sch 160 Steel Pipes	Api Sch 160 Black Lsaw Pipes
Sch 160 Pvc Pipes	Sch 160 50mm Galvanized Steel Pipes
Sch 160 Galvanized Steel Pipes	Sch 160 Scaffolding Steel Pipes
2 Inch Sch 160 Pipes	Sch 160 Dn25 To Dn300 Gi Pipes
Sch 160 Black Steel Pipes	Sch 160 Black Water Well Casing Steel Pipes
3 Inch Sch 160 Pvc Pipes	Astm A53 Sch 160 Carbon Seamless Steel Pipes
Sch 160 Perforated Pipes	1.5 Inch 100mm Diameter Sch 160 Ms Gi Hot Dip Galvanized Pipes
2.5 Inch Sch 160 Black Iron Pipes	Astm A 53 Carbon Sch 160 Steel Black Iron Pipes
0.5 1/2 3/4 1 2 2.5 3 4 6 Inch Diameter Sch Sch 160 Pipes	Hot Dipped Sch 160 Galvanized Steel Pipes
Sch 160 Sch 80 Pvc Pipes	Sch 160 Pvc Pipes Plastic
3/4" 14" Sch 160 White Pvc Water Pipes	Sch 160 Carbon Erw Welded Mild Round Black Steel Pipes
Sch 160 Carbon Steel Seamless Pipes	Sch 160 Pipes
Welded Sch160 Steel Pipes	Gi Pipes Sch 160 80mm Green House Galvanized Pipes
Astm A53 Gr. B Erw Sch 160 Carbon Steel Pipes	Sch 160 Api 5l X 52 Oil Casing Pipes For Oil Drilling
Welded Sch160 Steel Tubes	Gi Pipes Schdule 160 80mm Green House Galvanized Pipes
Astm A53 Gr. B Erw Schdule 160 Carbon Steel Tubes	Schdule 160 Api 5l X 52 Oil Casing Pipes For Oil Drilling
Schdule 160 Pvc Tubes	Schdule 160 Pvc Pipes Plastic
3/4" 14" Schdule 160 White Pvc Water Tubes	Schdule 160 Carbon Erw Welded Mild Round Black Steel Pipes
Schdule 160 Carbon Steel Seamless Tubes	Schdule 160 Pipes
Schdule 160 Steel Tubes	Api Schdule 160 Black Lsaw Pipes
Schdule 160 Pvc Pipes	Schdule 160 50mm Galvanized Steel Tubes
2.5 Inch Schdule 160 Black Iron Pipes	Astm A 53 Carbon Schdule 160 Steel Black Iron Tubes
0.5 1/2 3/4 1 2 2.5 3 4 6 Inch Diameter Sch Schdule 160 Pipes	Hot Dipped Schdule 160 Galvanized Steel Tubes
Schdule 160 Galvanized Steel Tubes	Schdule 160 Scaffolding Steel Pipes
2 Inch Schdule 160 Pipes	Schdule 160 Dn25 To Dn300 Gi Tubes
Schdule 160 Black Steel Pipes	Schdule 160 Black Water Well Casing Steel Tubes
3 Inch Schdule 160 Pvc Pipes	Astm A53 Schdule 160 Carbon Seamless Steel Tubes
Schdule 160 Perforated Pipes	1.5 Inch 100mm Diameter Schdule 160 Ms Gi Hot Dip Galvanized Tubes

Schedule 160 Pipes Packaging

waterproof paper and plastic coverage
Wooden pallets or cases
Or as to clients' requirements.

Packaging Features:

End of Schedule 160 Pipes protected by plastic caps.
Each bundle covered with plastic for protection against extreme weather.
Each radius of UBend tube separated by a separator.
Packaging list (laminated) placed with box/crate.
Bundles strapped with plastic strips.

Value Added Services of Sch 160 Pipes

Pipe Polishing
100% XRay Welding
Heat Treatment, Annealing, Pickling
Beveling
Ultrasonic Testing
Special Testing Requirements – Destructive Testing, Non Destructive Testing etc.
Cold Drawing Services

Schedule 160 Pipes Application

Sch 160 Pipes made up of Cs is used in low impact stress and corrosive applications with high pressure. Gas lines and Water lines can use the pipes but they are often coated to have good corrosion resistance.