Incoloy 800H Pipe

Incoloy 800H Pipe

Incoloy 800H is a higher carbon version of the alloy 800. The Incoloy 800H Pipe is designed with a superior chemical composition consisting of 30 to 35% of nickel with 19 to 23% of chromium and other constituent alloys. The outstanding content gives these pipes excellent corrosion and oxidation resistance properties. The Alloy 800H Pipe works well in applications when they are exposed to high temperatures for a prolonged period of time. The extra carbon content allows them to possess superior creep rupture properties that are above 1100 degrees F. The Incoloy 800Ht Pipe is a slight modification to the 800H alloys. In these pipes the combined titanium and aluminum levels allow the pipes to work at slightly higher temperatures than the 800h alloys. Both these alloys can be dual certified and are preferred for use in high-temperature setups.

The piping components in this grade are designed possessing superior mechanical properties. The Incoloy 800H Tube showcases a tensile strength between 75 to 100ksi. These tubes have a yield strength between 30 to 60ksi and can be readily elongated by 60-30% in the system. The Alloy 800H Tube has good machining characteristics as seen in iron-based alloy and they tend to work-harden during the machining process. These tubes can be readily welded in place following common welding process without requiring a matching filler metal. They can be both hot as well cold-rolled followed by annealing. Annealing is performed at temperatures of 982 degrees C, followed by air cooling.

A Inconel 800H Seamless Pipe is designed by passing hot steel billets through an extruded metal grade to shape them precisely. The pipes of seamless configurations have higher load-bearing capacity and strength over other grades. Their outstanding properties and the material used in producing them makes them expensive. The pipes and tubes of this grade designed in India especially in our shops are cheaper and have advanced features as compared to the grades produced in European nations and USA. ASTM B407 UNS N08810 is a specification that covers non-pressurized vessels and lays down standards to produce different components. To know more about our products or their pricing, contact us or visit any of our outlets.


Alloy 800H Tube and ASTM B407 UNS N08810 Seamless Pipe supplier in India

Incoloy 800H Pipe Supplier

Manufacturer of ASME SB407 UNS N08810 Tubing in Mumbai, View our live stock & price of Incoloy 800H Welded Pipe

Incoloy 800H Pipe Price

Description Per Unit (INR)
SEAMLESS INCOLOY/INCONEL ALLOY 800H PIPES - 21.30X3.73 PE 1J/PBP/7642036 / 3 / PSSZ0H3B 0.500 (QTY- 960.61 MTR) 2,928
SEAMLESS 800H INCONEL ALLOY PIPES - 21.30X3.73 PE 1J/PBP/7642036 / 3 / PSSZ0H3B 0.500 (QTY- 154.50 MTR) 2,216
SEAMLESS INCOLOY 800H ALLOY PIPES- 21.30X3.73 PE 1J/PBP/7642036 / 1 / PSS00H3B 0.500 (QTY-640.80 MTR) 3,020

Specification Chart of Incoloy 800Ht Pipe

Standard Specification ASTM B514 /ASME SB 514, ASTM B407/ ASME SB 407
Manufacturing Type Seamless / ERW / Welded / Fabricated / CDW / CDS / DOM / CEW / 100% X Ray Welded
Thickness Range SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXH, SCH XXS, SCH XS
Value Added Services
  • Cutting
  • Beveling
  • Threading
  • Destructive and Non Destructive
  • Ultrasonic Testing
  • Draw & Expansion as per required Size & Length
END Plain End, Beveled End, Treaded Alloy 800H Pipe
  • Specification
  • Material Grade
  • Nominal Size
  • Schedule or Wall Thickness
  • Method of Manufacturing (Seamless / Welded)
  • Heat Number
  • Manufacturer’s Name or Custom Logo - on request

Marked Pipe Sample: ASTM B407 UNS N08810 12" NB SCH 40S SEAMLESS HEAT NO. XXXX

Test Certificate
  • Surface roughness measurement
  • HS Code Commercial Invoice
  • Fumigation Certificates
  • Raw Materials Certificate
  • Third Party Inspection Report
  • Moisture testing
  • Heat Treatment Charts
  • Manufacturer Test Certificate
  • 100% Radiography Test Report
  • Laboratory Test Certificate from Govt. Approved Lab
  • Form A for Generalized System of Preferences (GSP)
  • DFARS compliant
  • EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
ASTM B514 Incoloy 800H Pipe Packaging Packed in PE Fabric Bundles or ply wooden box wrapped in plastic or Standard seaworthy export packing or as per customers' request
Port Mumbai, India

ASTM B407 UNS N08810 Tubing, ASME SB 407 Grade 1.4958 Heat Exchager Tube stockist in India

Incoloy 800H Tube Chemical Composition

GRADE Ni C Fe Si Mn S Al Ti Cu Cr
Incoloy 800H 30-35 0.05-0.1 39.5 min 1.0 max 1.5 max 0.015 max 0.15-0.60 0.15-0.60 0.75 max 19-23

Alloy 800H Seamless Pipe exporter, Check ready sizes & price list of ASME SB 407 Grade 1.4958 Round Pipe & Incoloy 800H ERW Pipe

Mechanical Properties of Alloy 800H Tube

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.94 g/cm3 1385 °C (2525 °F) Psi - 30,000 , MPa - 205 Psi - 75,000 , MPa -520 30 %

Incoloy 800H Tubing Equivalent

Incoloy 800H N08810 1.4958 Z8NC32-21 X10NiCrAlTi32-20 NCF 800H NA 15(H) ЭИ670 XH32T
stockholder and distributors of UNS N08810 Round Pipe, Alloy 800H Tubing and Incoloy 800H Condenser Tubes at factory price in Mumbai

Application of Incoloy 800H Welded Pipe

  • Ethylene furnace quench boilers
  • Hydrocarbon cracking
  • Valves, fittings and other components exposed to corrosive attack from 1100-1800° F
  • Industrial furnaces
  • Heat-treating equipment
  • Chemical and petrochemical processing
  • Super-heater and re-heaters in power plants
  • Pressure vessels
  • Heat exchangers
Supplier of ASTM B154 Alloy 800H Exhaust, Capillary, Instrument, Square, Hydraulic and Coiled Tubing for high heat environments

Inconel 800H Seamless Pipe Standards

  • ASTM B 163
  • ASME SB 163
  • ASTM B 407/B 829
  • ASME SB 407/SB 829
  • ASTM B 514/B 775
  • ASME SB 514/SB 775
  • ASTM B 515/B 751
  • ASME SB 515/SB 751
  • ASME Code Case 1325 and 1983
  • BS 3074NA15
  • SEW 470
  • VdTÜV 412 & 434
  • ISO 6207
  • DIN 17459

Alloy 800H Pipe Types

Incoloy 800H Pipe
Incoloy 800H Pipe
Incoloy 800Ht Pipe
Incoloy 800Ht Pipe
Incoloy 800H Tube
Incoloy 800H Tube
Alloy 800H Pipe
Alloy 800H Pipe
Alloy 800H Tube
Alloy 800H Tube
Incoloy 800H Tubing
Incoloy 800H Tubing
Incoloy 800H Welded Pipe
Incoloy 800H Welded Pipe
Inconel 800H Seamless Pipe
Inconel 800H Seamless Pipe
ASTM B407 Uns N08810 Erw Pipe
ASTM B407 Uns N08810 Erw Pipe
Sb 407 N08810 Grade 1.4958 Pipe
Sb 407 N08810 Grade 1.4958 Pipe
ASTM B407 Inconel 800H Condenser Tubes material for sale in India, Incoloy 800H Tube supplier in India

Melting Point of ASTM B407 Uns N08810 Erw Pipe

Melting Point 1385 °C (2525 °F)

Sb 407 N08810 Grade 1.4958 Pipe Density

Density 7.94 g/cm3

Stock of Alloy 800H Pipe

UNS N08810 Incoloy 800H Seamless Pipes Incoloy 800H Alloy Square Tube
Alloy 800H 1.4958 Seamless Pipes Alloy 800H Seamless Tube
UNS N08810 Incoloy 800H Hollow Pipes Incoloy 1.4958 Shell And Tube Heat Exchanger
Alloy 800H Round Pipes Incoloy 800H Alloy Rectangular Tube
Incoloy 800H Thick Wall Pipes ASTM B165 UNS N08810 Incoloy Tube
SCH40 Incoloy Grade 800H pipes UNS N08810 Incoloy 800H Tube
Alloy 800H Polished Pipes Incoloy 1.4958 Thick Wall Tube
Incoloy 800H Alloy Thin Wall Pipes Marine Grade Alloy 800H Tube
Alloy 800H Welded Pipes Grade Incoloy 800H Box Tube
UNS N08810 Incoloy 800H clad pipes Incoloy 1.4958 Boiler Tube
Incoloy 800H Alloy Seamless Pipes Grade Incoloy 800H Braided Tube
Alloy 800H Pipes UNS N08810 Incoloy 800H Capillary Tube
Incoloy N08810 ERW Pipes Alloy 800H 1.4958 Cylinder Tube
Incoloy 800H Alloy Welded Pipes Incoloy 1.4958 Coil Tube
Incoloy Grade 800H Electropolish Pipes Alloy 800H Dairy Tube
Alloy 800H Polished Pipes Alloy 800H 1.4958 Dom Tube
Incoloy 800H Alloy Decorative Pipes Incoloy 1.4958 Decorative Tube
Alloy 800H Square Pipes 1.4958 Incoloy Exhaust Tube
Incoloy 800H Alloy Polished Pipes Alloy 800H Elliptical Tube
Alloy 800H 1.4958 Rectangular Pipes Incoloy 1.4958 Flex Tube
1.4958 Incoloy exhaust pipes Alloy 800H Fin Tube
Alloy 800H schedule 40 pipes Incoloy 800H Alloy Fuel Tube
Incoloy Grade 800H schedule 10 pipes Alloy 800H Finned Tube Heat Exchangers
Pipes AISI 1.4958 Incoloy Incoloy 800H Alloy Gas Tube
Alloy 800H 1.4958 flex pipes Alloy 800H Grooved Tube
Grade Incoloy 800H grade pipes Alloy 800H 1.4958 Hydraulic Tube
Jindal Alloy 800H Pipes Alloy 800H Heat Exchanger Tube
UNS N08810 Incoloy 800H straight pipes Alloy 800H 1.4958 Handrail Tube

Check Our Incoloy 800Ht Pipe Dispatch In Following Countries

Scott Chemicals Australia Pty Ltd

Scott Chemicals Australia Pty Ltd

Incoloy 800H Pipe
Alpha Chemicals

Alpha Chemicals

Incoloy 800H Tube
Deltrex Chemicals

Deltrex Chemicals

Alloy 800H Pipe