Incoloy 800 is part of an austenitic grade of stainless steel. An Incoloy 800 Pipe is designed with a composition of nickel, chromium, iron, manganese, molybdenum, and other components. This gives the Inconel 800 Pipe excellent corrosion and oxidation resistance properties across stress-induced setups. These pipes are capable to withstand extreme pressures and temperatures for a prolonged period of time. Alloy 800 Pipe shows good tolerance to pitting and reducing acids in marine and aqueous setups. These pipes possess enhanced strength and excellent mechanical properties. Incoloy 800 Tube is designed with a minimum tensile strength of 600mpa with a minimum yield strength of 275mpa. They can be easily elongated by 45% and still possess good workability. The Alloy 800 Tube has a density of 7.94 gm/c3 and is primarily preferred in applications where the temperatures are up to 1100 degrees F. 1.4876 Tube is a grade that is work-hardened by machining process. The higher ductility allows these materials to be welded in place making use of standard welding procedures. The versatile Incoloy 800 Tubing can be readily hot worked at temperatures in the range between 871 to 1232 degrees C. They can be cold worked and annealed, making use of standard procedures.
The Incoloy 800 Seamless Pipe is a high-strength grade designed possessing superior strength and load-bearing capacity. These pipes are manufactured by passing hot steel billets through an extruded metal grade. The outstanding content embedded in the Alloy 800 Seamless Pipe makes them more expensive than other pipe grades. The pipe grades have a standardized length with a diameter of 24 inches. The ASTM B407 UNS N08800 is a grade in this range that specifies standards and designs for non-pressurized vessel grades. The items within this grade can be manufactured in seamless or welded configurations to meet different project requirements. The price of these alloys in the USA and European nations far exceeds the price in India. To find out the pricing and any details about these piping modules, get in touch with us.
ASTM B407 UNS N08800 and Alloy 800 Tube supplier in india
Alloy 800 Seamless Pipe manufacturer in India
ASTM / ASME Standards
ASTM B407 / ASME SB407
EFW Pipe size
5.0 mm - 1219.2 mm
Pipe Schedule
SCH5, SCH10, SCH40, STD, SCH80, SCH160
Pipe Finish
Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF
Manufacturer Of Pipe Form
Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc. Supplier
Pipe Length
Single Random, Double Random & Cut Length.
End
Plain End, Beveled End, Treaded.
Marking
All Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Material Test Certificates (MTC)
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
Size of Welded Tube
6.35 milimeter Outside diameter To 152 milimeter Outside diameter
Swg & Bwg
10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg.
WT of tubing
0.020" to 0.220" or (custom)
tube Length
Single Random, Double Random, Cut length and Standard
Tube Finish
BA (Bright & Annealed), MF, Polished, AP (Annealed & Pickled)
tube Form
Round, Coil, Square, Rectangular, Boiler, Hydraulic, Straight or ‘U’ bent Tubes, Hollow, LSAW Tubes supplier
End
Beveled End, Plain End, Threaded end pipe Manufacturer
Tube Type
ERW, Seamless, Welded, EFW, Fabricated tube Supplier
Marking
All tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.)
Application
Oil Tube, Gas Tube, Fluid Tube, Boiler and Heat exchanger
Length: up to 26 Met. (Meters)
Thickness : 0.8 - 12.7 millimeter
Outside Diameter: 6.35 to 114.3 millimeter O.D
Size: 1/2 Inch To 12 Inch Outside Diameter, Guage: 25 To 10 SWG
Stockist and exporter of ASME SB 407 UNS N08800 material & Incoloy 800 Tube, View Alloy 800 Pipe Price List
Description
Per Unit (INR)
INCOLOY 800 SMLS PIPE TO ASTM B 407 GRUNS NO 8800 IN 5 TO 7 MTRS LENGTH NACE MR-0175 SIZE:3 NBXSCH 40S
46,169
INCOLOY PIPE:PIPE WWELDED SCH 120 INCOLOY 800 UNS NO8800 RT 100% 18X1MR LG
764,624
SEAMLESS ALLOY STEEL PIPE ASTM B407 (UNSN08800) INCOLOY 800 SIZE 4NB x sch 40s
18,337
SEAMLESS ALLOY STEEL PIPE ASTM B407 (UNSN08800) INCOLOY 800 SIZE 6NB x sch 40s
35,340
NICKEL - ALLOY PIPE :- PIPE SMLS 2.1/2IN- 40S SP: 5,16- INCOLOY 800 ANSI B 36.10--L=4 TO 7 MT
15,170
1/8" IPS(.405"O. D.)
3 1/2" IPS( 4.000"O. D.)
SCH 40, 80
SCH 10, 40, 80, 160, XXH
1/4" IPS(.540"O. D.)
4" IPS(4.500"O. D.)
SCH 10, 40, 80
SCH 10, 40, 80, 160, XXH
3/8" IPS(.675"O. D.)
5" IPS( 5.563"O. D.)
SCH 10, 40, 80
SCH 10, 40, 80, 160, XXH
1/2" IPS(.840"O. D.)
6" IPS(6.625"O. D.)
SCH 5, 10, 40, 80, 160, XXH
SCH 5, 10, 40, 80, 120, 160, XXH
3/4" IPS(1.050"O. D.)
8 ” IPS(8.625"O. D.)
SCH 10, 40, 80, 160, XXH
SCH 5, 10, 40, 80, 120, 160, XXH
1" IPS:(1.315′O. D.)
10" IPS(10.750"O. D.)
SCH 5, 10, 40, 80, 160, XXH
SCH 10, 20, 40, 80 (.500), TRUE 80(.500)
1-1/4" IPS(1.660"O. D.)
12" IPS(12.750"O. D.)
SCH 10, 40, 80, 160, XXH
SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500)
1-1/2" IPS(1.900"O. D.)
14" IPS(14.000"O. D.)
SCH 10, 40, 80, 160, XXH
SCH10 (.188), SCH40 (.375)
2" IPS(2.375"O. D.)
16" IPS(16.000"O. D.)
SCH 10, 40, 80, 160, XXH
SCH10(.188), SCH40(.375)
2 1/2" IPS(2.875"O. D.)
18" IPS (18.000"O. D.)
SCH 10, 40, 80, 160, XXH
SCH-40 (.375)
3" IPS( 3.500"O. D.)
SCH 5, 10, 40, 80, 160, XXH
Check MTC EN 10204/3.1B before you buy from Alloy 800 Tube stockholder in India, Buy Incoloy 800 Welded Tubes in straight and coiled form
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 Pipe 1.4876
N08800
NCF 800
NA 15
ЭИ670
Z8NC32-21
X10NiCrAlTi32-20
XH32T
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
800-H-HT
Psi – 75,000 , MPa – 520
Psi – 30,000 , MPa –205
30
–
–
W. Nr. 1.4876 Inconel Alloy 800 ERW Pipe are produced as per ASTM B163 & ASME SB 163, ASTM B 515/B 751 & ASME SB 515/SB 751
Grade C Mn Si Fe S Cr Al-Ti Ni
Incoloy 800 Pipe min.
–
–
–
39.5
–
19.0
0.15
30.0
max.
0.1
1.5
1.0
–
0.015
23.0
0.60
35.0
NOMINAL SIZE [INCHES]
OUTSIDE DIAMETER (OD) [INCHES]
OUTSIDE DIAMETER (OD) [MM]
WALL THICKNESS [INCHES]
WALL THICKNESS [MM]
WEIGHT [LB/FT]
WEIGHT [KG/M]
1/8" NPS 6
0.41
10.3
0.068
1.73
0.24
0.37
1/4" NPS 8
0.54
13.7
0.088
2.24
0.42
0.63
3/8" NPS 10
0.68
17.1
0.091
2.31
0.57
0.84
1/2" NPS 15
0.84
21.3
0.109
2.77
0.85
1.27
3/4" NPS 20
1.05
26.7
0.113
2.87
1.13
1.69
1" NPS 25
1.32
33.4
0.133
3.38
1.68
2.5
1 1/4" NPS 32
1.66
42.2
0.14
3.56
2.27
3.39
1 1/2" NPS 40
1.9
48.3
0.145
3.68
2.72
4.05
2" NPS 50
2.375
60.3
0.154
3.91
3.65
5.44
2 1/2" NPS 65
2.875
73.0
0.203
5.16
5.79
8.63
3" NPS 80
3.5
88.9
0.216
5.49
7.58
11.29
3 1/2" NPS 90
4.0
101.6
0.226
5.74
9.11
13.57
4" NPS 100
4.5
114.3
0.237
6.02
10.79
16.07
5" NPS 125
5.563
141.3
0.258
6.55
14.62
21.77
6" NPS 150
6.625
168.3
0.28
7.11
18.97
28.26
8" NPS 200
8.625
219.1
0.322
8.18
28.55
42.55
10" NPS 250
10.75
273.0
0.365
9.27
40.48
60.31
12" NPS 300
12.75
323.8
0.406
10.31
53.52
79.73
14" NPS 350
14.0
355.6
0.437
11.13
54.57
94.55
16" NPS 400
16.0
406.4
0.5
12.7
82.77
123.3
18" NPS 450
18.0
457.0
0.562
14.27
104.67
155.8
20" NPS 500
20.0
508.0
0.594
15.09
123.11
183.42
24" NPS 600
24.0
610.0
0.688
17.48
171.29
255.41
32" NPS 800
32.0
813.0
0.688
17.48
230.08
342.91
AWS A5.14 ERNiCr-3, AWS A5.11 ENiCrFe-2 Weld Rod
Stockist of Alloy 800 Extruded Seamless Tube, UNS No 8800 Square/ Round/ Hollow Pipes and Incoloy 800 Tubing as per ISO 6207 standard
Incoloy 800 Seamless Pipe
ASTM B407 Uns N08800 Incoloy 800 Welded Pipe
Werkstoff Number 1.4876 Pipe
UNS N08800 Incoloy 800 Seamless Pipes
Incoloy 800 Alloy Square Tube
Alloy 800 1.4876 Seamless Pipes
Alloy 800 Seamless Tube
UNS N08800 Incoloy 800 Hollow Pipes
Incoloy 1.4876 Shell And Tube Heat Exchanger
Alloy 800 Round Pipes
Incoloy 800 Alloy Rectangular Tube
Incoloy 800 Thick Wall Pipes
ASTM B165 UNS N08800 Incoloy Tube
SCH40 Incoloy Grade 800 pipes
UNS N08800 Incoloy 800 Tube
Alloy 800 Polished Pipes
Incoloy 1.4876 Thick Wall Tube
Incoloy 800 Alloy Thin Wall Pipes
Marine Grade Alloy 800 Tube
Alloy 800 Welded Pipes
Grade Incoloy 800 Box Tube
UNS N08800 Incoloy 800 clad pipes
Incoloy 1.4876 Boiler Tube
Incoloy 800 Alloy Seamless Pipes
Grade Incoloy 800 Braided Tube
Alloy 800 Pipes
UNS N08800 Incoloy 800 Capillary Tube
Incoloy N08800 ERW Pipes
Alloy 800 1.4876 Cylinder Tube
Incoloy 800 Alloy Welded Pipes
Incoloy 1.4876 Coil Tube
Incoloy Grade 800 Electropolish Pipes
Alloy 800 Dairy Tube
Alloy 800 Polished Pipes
Alloy 800 1.4876 Dom Tube
Incoloy 800 Alloy Decorative Pipes
Incoloy 1.4876 Decorative Tube
Alloy 800 Square Pipes
1.4876 Incoloy Exhaust Tube
Incoloy 800 Alloy Polished Pipes
Alloy 800 Elliptical Tube
Alloy 800 1.4876 Rectangular Pipes
Incoloy 1.4876 Flex Tube
1.4876 Incoloy exhaust pipes
Alloy 800 Fin Tube
Alloy 800 schedule 40 pipes
Incoloy 800 Alloy Fuel Tube
Incoloy Grade 800 schedule 10 pipes
Alloy 800 Finned Tube Heat Exchangers
Pipes AISI 1.4876 Incoloy
Incoloy 800 Alloy Gas Tube
Alloy 800 1.4876 flex pipes
Alloy 800 Grooved Tube
Grade Incoloy 800 grade pipes
Alloy 800 1.4876 Hydraulic Tube
Jindal Alloy 800 Pipes
Alloy 800 Heat Exchanger Tube
UNS N08800 Incoloy 800 straight pipes
Alloy 800 1.4876 Handrail Tube
Tensile Strength : Psi – 95,000 , MPa -655
Yield Strength Psi – 45,000 , MPa – 310
Petronas Rapid Project, Southern Johor Malaysia
Incoloy 800 Pipe
Fertilizer Saf Sulphur Factory- New 2nd Industrial Area, P.o. Box 70482 Riyadh Central 11567 Saudi Arabia
Incoloy 800 Tube
Tadaruk Global Corporation, Jeddah, Saudi Arabia
Alloy 800 Pipe
"Government Recognised Star Export House"
Table of Contents