EN 10305-1 grade covers steel to produce precision piping grades. The EN 10305-1 Tube is designed with a chemical composition of carbon, silicon, manganese, phosphorus, and sulfur. This gives the EN 10305-1 Steel Tubes good strength and excellent tolerance to high temperatures and corrosive media in stress-induced environments. The EN 10305-1 Material is designed with a tensile strength between 340mpa up to 550mpa. They can be elongated by 22% in the system. Steel Tube EN 10305-1 grade can be precisely shaped in different sizes and dimensions to meet different project requirements. The versatile EN 10305-1 Pipe is widely used in transmission shafts, fuel injection pipes, power steering systems, boiler equipment, heat exchanger tubes, and so on.
The EN 10305-4 grade is designated with a letter E, making the precision tubes adhere to standards and tolerances that are suited for machining parts. EN 10305-4 Pipe is designed keeping in mind there is no room for error or mismatch to take place within the piping system. EN 10305-1 E235 is one of the grades in this precision tubes range. These components have exceptional dimensional tolerance and enhanced accuracy. The EN 10305-1 E235+c grade is designed to be delivered in the cold drawn condition to the buyer. They are available in schedules of SCH 10 to SCH 160 and XXS. The E235+n Pipe is required to be delivered in normalized conditions. These pipes possess tight tolerance and showcase better mechanical properties and hardness. The E235+c Carbon Steel Seamless Tubes are strong components designed by passing hot steel through an extruded metal. These tubes have excellent load-bearing capacity compared to other types of piping equipment in this grade. The modules of this grade produced in India are cheaper than other European countries due to the availability of abundant raw material and labour. Get in touch with us to get more information about the pricing and added information about the product.
Pipe types | Steel grades | Resistance properties | |||||||||||
+C | +LC | +SR | +A | +N | |||||||||
Rm [MPa] | A% | Rm [MPa] | A% | Rm [MPa] | Re [MPa] | A% | Rm [MPa] | A% | Rm [MPa] | Re [MPa] | A% | ||
Precision E235, E255, E355 According to PN-EN 10305-1 |
E235 | 480 | 6 | 420 | 10 | 420 | 350 | 16 | 315 | 25 | 340- 480 | 235 | 25 |
E255 | 580 | 5 | 520 | 8 | 520 | 375 | 12 | 390 | 21 | 440- 570 | 255 | 21 | |
E355 | 640 | 4 | 580 | 7 | 580 | 450 | 10 | 450 | 22 | 490- 630 | 355 | 22 | |
C34E | 590 | 5 | 540 | 7 | - | - | - | 440 | 22 | >\= 460 | 280 | 21 | |
C45E | 720 | 4 | 670 | 6 | - | - | - | 510 | 20 | >\= 540 | 340 | 18 |
EN 10305-1 Tube Manufacturer in India, Suppliers Of E235+n Pipe In Mumbai, One Stop Shop For All E235+n Tube.
Price of en 10305 steel tube manufacturer in India | EN 10305 Pipe Price in India (INR) | en 10305 steel tube Price in USD | Steel en 10305 Pipe Price in UAE Dirham |
---|---|---|---|
en 10305 1 e355 n seamless steel pipe | INR 35631.01 | $ 500.00 | 1837.15 UAE Dirham |
EN 10305 Precision Small Diameter Seamless Steel Pipe | INR 60572.72 | $ 850 | 3123.15 UAE Dirham |
Cold Rolled EN 10305 Seamless Carbon Steel Small Pipes | INR 85.51 | $ 1.20 | 4.41 UAE Dirham |
EN 10305-1 Tube Supplier in India, We Maintain EN 10305-1 Steel Tubes Good Quality, Check Availability Of E235+c Carbon Steel Seamless Tubes, Get Free Quote Of EN 10305-1 E235.
Pipe types | CHEMICAL COMPOSITION (LADLE ANALYSIS) | ||||||||||
C% | Si% | Mn% | P% | S% | Cr% | Mo% | V% | Inne% | Cr+ Mo+ Ni Max% | Al.% | |
E235 | <\=0,17 | <\=0,35 | <\=1,20 | <\=0,025 | <\=0,025 | - | - | - | - | - | 0,020- 0,060 |
E255 | <\=0,21 | <\=0,35 | 0,40-1,10 | <\=0,025 | <\=0,025 | - | - | - | - | - | 0,020- 0,060 |
E355 | <\=0,22 | <\=0,55 | <\=1,60 | <\=0,025 | <\=0,025 | - | - | - | - | - | 0,020- 0,060 |
C35E | 0,32-0,39 | <\=0,40 | 0,50-0,80 | 0,035 | <\=0,035 | <\=0,40 | <\=0,10 | - | - | 0,63 | - |
C45E | 0,42-0,55 | <\=0,40 | 0,50-0,80 | 0,035 | <\=0,035 | <\=0,40 | <\=0,10 | - | - | 0,63 | - |
Standard | IS, GB, JIS, ASME, ASTM, AISI, EN, DIN Pipes |
---|---|
Seamless Pipes Sizes | 4 to 219 milimeter Wall thk.: 0.5 to 20 milimeter |
Welded Pipes Sizes | 5.0 milimeter – 1219.2 milimeter |
Seamless Tube Sizes | 3.35 milimeter OD To 101.6 milimeter OD |
Tubes Swg & Bwg | 10, 12 , 16, 14, 18, 20 Swg. |
EFW Pipes sizes | 5.0 – 1219.2 milimeter |
Pipe Schedule | SCH40,STD, SCH40S, SCH80, SCH60, XS, SCH5, SCH10S, SCH10, SCH20, SCH80, SCH30, SCH120, SCH160, SCH140, XXS |
Welded Tube Size | 6.35 OD To 152 milimeter OD |
Length | Double , Single Random, Cut length Tube & Pipe |
Finish | AP, Polished, BA, MF |
Form | U’ bent or Round, Hollow,Hydraulic, ‘ Straight Pipes, LSAW, Boiler,Rectangular, Clad Pipes, Square Pipes Etc |
Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204 3.1, EN 10204/3.1B, and EN 10204 3.2, 100% Radiography Test Report, Third Party Inspection Report, Raw Materials Certificate, Fumigation Certificates, Heat Treatment Charts, |
Application | Oil Pipes & Tube, Fluid Pipes & Tube, Gas Pipes & Tube, Boiler Pipes & Tube, Heat exchanger Tube |
End | Beveled , Plain End, Treaded Pipes & Tube |
Check EN 10305-1 E235+c mechanical Composition And EN 10305-1 E235+n Dimensions In Inch.
Yield Strength | Tensile Strength | Elongation A5 min | |||
MPa min | ksi min | MPa min | MPa min | ksi min | Percentage |
490 | 630 | – | 22 |
Mandatory | Chemical analysis | M | M |
Tensile testing | M | One per tested batch | |
Dimension verification | M | M | |
Visual inspection | M | M | |
Optional | Flattening test or expansion test (option 20) | M | One per tested batch |
Roughness measurement | Not applicable | One per tested batch | |
NDT in order to identify longitudinal discontinuity | Not applicable | Individual | |
NDT in order to identify leaks |
View Grades Equivalent Of EN 10305-4, EN 10305-1 Pipe Manufacturer In India.
Table of Contents