EN 10294-1 Hollow Bars

EN 10294-1 Hollow Bars

EN 10294-1 Grade E355+N Alloy Steel Seamless Tubes and EN 10294-1 Gr 38Mn6 Carbon Steel Hollow Bar supplier in India

EN 10294-1 is a low carbon grade of steel. The EN 10294-1 Hollow Bars are designed with a superior composition of carbon, silicon, manganese, phosphorous, sulfur, nickel, chromium, molybdenum, copper, and vanadium. The content embedded in these bars gives them enhanced resistance against corrosive and oxidative media. EN 10294-1 Gr 38Mn6 Carbon Steel Hollow Bar is produced in mild carbon steel grades. These hollow bars provide support and stability to different structural steel applications. The versatile Gr E235 TubeEN 10294-1 Grade E235 Hollow Bars are unalloyed steel grade that belongs to European standards. These bars are well suited for a wide spectrum of machining procedures without the need for a heat-treatment process. The EN 10294-1 Grade E315 Hollow Bars have a superior tensile strength of 450mpa with a minimum yield strength of 315mpa and can be easily elongated by 21% in the system. EN 10294-1 Grade E275 Hollow Bars have lower strength in comparison to the 275 grade. These bars can be surface protected and are seen in machine parts, hydraulic prop tubes, machining, and engineering applications.

An EN 10294-1 Grade 38Mn6 Seamless Pipe is designed via an extrusion process as hot steel billets are passed through extruded metal to precisely shape them. These pipes have excellent strength and outstanding load-bearing capacity. The EN 10294-1 Grade E355+N Alloy Steel Seamless Tubes are supplied via a normalized condition. These tubes are very durable and can be hardened, tempered, annealed and precipitation hardened. The diameters of these tubes are different for round, square, rectangular, or hollow sections. All these piping components can be customized as per different project requirements. If you have any queries or want to know more about these products, contact us or visit any of our outlets for more information.

EN 10294-1 Hollow Bars

EN 10294-1 Grade 38Mn6 Seamless Pipe & Gr E235 Tube manufacturer in India

EN 10294-1 Carbon Steel Seamless Hollow Bars Specification Chart

Inner Dia 10-170 milimeter
Wall Thickness 10-40 milimeter
Maily Alloy grades E470, E355,20MnV6
Lengths Pipes are supplied with lengths according to standard requirements.
Any lengths different from the standard ones are subject to additional negotiations.
Outer Dia 30-250 milimeter
Certification Pipes are supplied with 3.1. inspection certificate, in conformity with EN 10204.
Surface Protection Pipes are supplied
Upon request pipes ends are protected with plastic caps. - external varnished with black or clear lacquer
- black and bare
- oiled
Application hydraulic prop tube, engineering, Machine parts,machining, etc.

Equivalent Grades Of EN 10294-1 Grade E355+n Hollow Bar

DIN BS EN ASTM NFA ASME
EN 10294-1 Grade E355+N

Check dimensions and Properties of E275/E315 Hollow Bars & Grade E355K2/ E275K2 Alloy Steel Hollow Bars

EN 10294-1 Bars Chemical Composition

Grades Carbon Silicon Manganese Phosphorous Sulphur Molybdenum Nickel Chromium Copper Others
E355+N max 0.22 max 0.50 max 1.50 0.045 0.05 max 0.08 max 0.40 max 0.30 max 0.30 V max 0.10
20MnV6+AR 0.16-0.22 0.10-0.50 1.30-1.70 0.045 0.05 max 0.08 max 0.40 max 0.30 max 0.30 V0.08-0.15
E235 max 0.18 max 0.35 max 1.20 0.045 0.045
E275 max 0.21 max 0.35 max 1.40 0.045 0.045
E315 max 0.21 max 0.30 max 1.50 0.03 0.035
E355K2 max 0.22 max 0.55 max 1.60 0.045 0.045
C40 0.17-0.24 max 0.40 0.40-0.70 0.045 0.045
20MnV6 0.16-0.22 0.10-0.50 1.30-1.70 0.035 0.04 V max 0.15
E355+AR max 0.22 max 0.50 max 1.50 0.045 0.05 max 0.08 max 0.40 max 0.30 max 0.30 V max 0.10
E275K2 max 0.20 max 0.40 max 1.40 0.035 0.03 max 0.10 0.3 max 0.30 max 0.35 V max 0.05
38Mn6 0.34-0.42 max 0.35 1.40-1.65 0.035 0.035
C22 0.17-0.24 max 0.40 0.40-0.70 0.045 0.045
C45 0.42-0.50 max 0.40 0.50-0.80 0.045 0.045
C60 0.57-0.65 max 0.40 0.60-0.90 0.045 0.045

Mechanical Properties Of EN 10294-1 Bar

Grades Yield Strength Tensile Strength Elongation A5 min
  MPa min ksi min MPa min MPa min ksi min Percentage
E355+N 490 20
20MnV6+AR     650     17
E235     360     25
E275     410     22
E315     450     21
E355K2     490     20
C40     420     21
20MnV6     600     19
E355+AR     490     18
E275K2     410      
38Mn6     670     14
C22     420     21
C45     610     16
C60     720     13
Wide stock of 20MnV6 Hollow Shafts & EN 10294-1 E355+AR/ 38Mn6 Hollow Bar

EN 10294-1 Grade E355+n Hollow Bars Characteristics

  • Improved machinability steels
  • tight dimensional tolerances
  • high surface quality (guaranted by internal non distructive inspections)
  • guarantee of the surfaces without defects with minimum weight loss due to turning.
Know more about Carbon Steel Grade C22/ C35/ C45/ C60/ C40 Hollow Pipe weight chart and dimensions

EN 10294-1 Grade 38Mn6 Hollow Bars Dimension Chart

EN 10294-1- Dimension

EN 10294-1 Grade 20mnv6+ar Hollow Bars Types

EN 10294-1 Grade E355+N Hollow Bars
EN 10294-1 Grade E355+N Hollow Bars
EN 10294-1 Grade 20MnV6+AR Hollow Bars
EN 10294-1 Grade 20MnV6+AR Hollow Bars
EN 10294-1 Grade E235 Hollow Bars
EN 10294-1 Grade E235 Hollow Bars
EN 10294-1 Grade E275 Hollow Bars
EN 10294-1 Grade E275 Hollow Bars
EN 10294-1 Grade E315 Hollow Bars
EN 10294-1 Grade E315 Hollow Bars
EN 10294-1 Grade E355K2 Hollow Bars
EN 10294-1 Grade E355K2 Hollow Bars
EN 10294-1 Grade C40 Hollow Bars
EN 10294-1 Grade C40 Hollow Bars
EN 10294-1 Grade 20MnV6 Hollow Bars
EN 10294-1 Grade 20MnV6 Hollow Bars
EN 10294-1 Grade E355+AR Hollow Bars
EN 10294-1 Grade E355+AR Hollow Bars
EN 10294-1 Grade E275K2 Hollow Bars
EN 10294-1 Grade E275K2 Hollow Bars
EN 10294-1 Grade 38Mn6 Hollow Bars
EN 10294-1 Grade 38Mn6 Hollow Bars
EN 10294-1 Grade C22 Hollow Bars
EN 10294-1 Grade C22 Hollow Bars
EN 10294-1 Grade C45 Hollow Bars
EN 10294-1 Grade C45 Hollow Bars
EN 10294-1 Grade C60 Hollow Bars
EN 10294-1 Grade C60 Hollow Bars
EN 10294-1 Grade Carbon Steel Hollow Bar
EN 10294-1 Grade Carbon Steel Hollow Bar
EN 10294-1 Carbon Steel Seamless Hollow Bars
EN 10294-1 Carbon Steel Seamless Hollow Bars
EN 10294-1 Hollow Bars
EN 10294-1 Hollow Bars

Testing Of EN 10294-1 Grade E235 Hollow Bars

  • Impact test (for N and QT supply condition)
  • Electromagnetic test acc.to 10246-5 Lev. F3 or 10246-3 longitudinal Lev. E3 (*)
  • Spectro test to avoid miscellaneous*
  • Visual and Dimensional control
  • Tensile test
  • Heat analysis

Price Of EN 10294-1 Hollow Bars

Description Price in INR
Steel 10294-1 Grade E235 Hollow Bar Rs.234
10294-1 Grade E355+N Carbon Steel Hollow Bar Rs.123
10294-1 Grade 20MnV6+AR Hollow Bar Rs.431
CS 10294-1 Grade E235 Hollow Bar Rs.302
Carbon Steel 10294-1 E355K2 Hollow Bar Rs.122
Price of Steel Grade E355+AR Hollow Bar Rs.102