"Government Recognised Star Export House"- info@lgpipeindia.com
EN 10219 Steel Tube
S275J2H Steel Tube and S275j2h Material Supplier in india
S275J2H steel is a structural steel European grade. The S275J2H Steel Tube is designed with a chemical composition of carbon, manganese, phosphorous, and sulfur. The content gives these tubes enhanced resistance to corrosive and oxidative media across different systems. The S275J2H Steel Structural Tube is a lightweight grade that provides support and stability to different applications. These tubes can be availed at 10, 12, 14, 16, 18, and 20 Swg. They can be availed in sizes between 6.35mm to 101.6mm or more. A versatile EN10219 Structure Pipe can be utilized in low and high-temperature setups and can be welded in place, making use of standard welding procedures. The S275j2h Material is designed with a minimum yield strength of 275mpa and a tensile strength between 410 to 560mpa. The material can be readily elongated by 23% and have an impact energy of 27 kV J at -20 degrees C.
The S275J2H Hollow Section can be produced in the hot or cold rolling process. These sections are used for fixed load-bearing structures. The hollow sections are suitable for automotive aerospace, and mechanical engineering due to their static boons. The robust sections have a smaller surface and are less resistant to liquids and air. Mild Steel S355joh Hollow Section has a content of carbon between 0.05% to 0.25%. The content embedded in these sections allows them to work in elevated pressure and temperature setups. These sections can be designed in a wide spectrum of shapes and sizes to meet project requirements. The S275joh Carbon Steel Exhaust Pipe is very strong and provides stability to the module during the discharge of high pressure and temperature gases or fluids. If you have any queries or want to know in detail about the products or their pricing, contact us or visit any of our outlets for more information.
EN10219 Structure Pipe S275joh Carbon Steel Exhaust Pipe Manufacturer in Mumbai, India
Specification Chart Of EN10219 Structure Pipe
| Standard No | EN 10219 |
| Outside Diameter | 21.3—457.2 milimeter |
| Wall Thickness | 1.8—-14.27 milimeter |
| Circular Dimension Range | 26.9 – 323.9 milimeter |
| Square Dimension Range | 25×25 – 300×300 milimeter |
| Rectangular Dim Range | 40×20 – 400×200 milimeter |
| Length | 6000 – 12 000/18 000 milimeter |
| Grade | S275JOH |
EN 10219 S355JOH Pipes S355joh Carbon Steel Pipes Chemical Composition
| Steel Grade | C | Si | Mn | P | S | N | Carbon Equivalent(CEV) |
| S275J2H | 0.20 | - | 1.50 | 0.030 | 0.030 | - | 0.40 |
| S275J0H | 0.20 | - | 1.50 | 0.035 | 0.035 | 0.009 | 0.40 |
| S355J0H | 0.22 | 0.55 | 1.60 | 0.035 | 0.035 | 0.009 | 0.45 |
S275J2H Hollow Section stockholder, View Mild Steel S355joh Hollow Section Price in India
| Description | Price |
| En 10219 ERW Black Welded Square Rectangular Steel Pipes | US $400.00-$550.00 / Ton |
| 14" Diameter EN 10219 SSAW Steel Pipes | US $620.00-$700.00 / Metric Ton |
| BS EN 10219 S235JRH S355J0H SHS AND CHS steel Pipes | US $605.00-$700.00 / Ton |
| en 10219 black round steel Pipes s235jr s275jr s355j2 s235 | US $455.00-$628.00 / Metric Ton |
Mechanical Properties Of EN 10219 S355JOH Pipes S275J2H Steel Pipes
| Grade | Min. Yield Strength Reh(Mpa) | Tensile Strength Rm (MPa) | Elongation % Min. | Min. Impact Energy(J) | ||||
| Thk≤ 16 milimeter | Thk>16 ≤ 40 milimeter | Thk<3 milimeter | Thk≥3 milimeter | -20°C | 0°C | 20°C | ||
| S275J2H | 275 | 265 | 430-580 | 410-560 | 20 | 27 | - | - |
| S275J0H | 275 | 265 | 430-580 | 410-560 | 20 | - | 27 | - |
| S355J0H | 355 | 345 | 510-680 | 470-630 | 20 | 27 | - | - |
Check EN 10219 S355JOH Hot Finished Structural Hollow Sections and Square Pipe and S275J2H Steel Structural Tube Weight and size chart
| Size milimeter | kg/m | Size milimeter | kg/m |
| 40 x 20 x 2.0 | 1.68 | 40 x 20 x 2.5 | 2.03 |
| 40 x 20 x 3.0 | 2.36 | 40 x 25 x 1.5 | 1.44 |
| 40 x 25 x 2.0 | 1.89 | 40 x 25 x 2.5 | 2.23 |
| 50 x 25 x 2.0 | 2.21 | 50 x 25 x 2.5 | 2.72 |
| 50 x 25 x 3.0 | 3.22 | 50 x 30 x 2.5 | 2.92 |
| 50 x 30 x 3.0 | 3.45 | 50 x 30 x 4.0 | 4.46 |
| 50 x 40 x 3.0 | 3.77 | 60 x 40 x 2.0 | 2.93 |
| 60 x 40 x 2.5 | 3.71 | 60 x 40 x 3.0 | 4.39 |
| 60 x 40 x 4.0 | 5.72 | 70 x 50 x 2 | 3.56 |
| 70 x 50 x 2.5 | 4.39 | 70 x 50 x 3.0 | 5.19 |
| 70 x 50 x 4.0 | 6.71 | 80 x 40 x 2.5 | 4.26 |
| 80 x 40 x 3.0 | 5.34 | 80 x 40 x 4.0 | 6.97 |
| 80 x 40 x 5.0 | 8.54 | 80 x 50 x 3.0 | 5.66 |
| 80 x 50 x 4.0 | 7.34 | 90 x 50 x 3.0 | 6.28 |
| 90 x 50 x 3.6 | 7.46 | 90 x 50 x 5.0 | 10.11 |
| 100 x 50 x 2.5 | 5.63 | 100 x 50 x 3.0 | 6.75 |
| 100 x 50 x 4.0 | 8.86 | 100 x 50 x 5.0 | 10.90 |
| 100 x 60 x 3.0 | 7.22 | 100 x 60 x 3.6 | 8.59 |
| 100 x 60 x 5.0 | 11.70 | 120 x 80 x 2.5 | 7.65 |
| 120 x 80 x 3.0 | 9.03 | 120 x 80 x 4.0 | 12.00 |
| 120 x 80 x 5.0 | 14.80 | 120 x 80 x 6.0 | 17.60 |
| 120 x 80 x 8.0 | 22.9 | 150 x 100 x 5.0 | 18.70 |
| 150 x 100 x 6.0 | 22.30 | 150 x 100 x 8.0 | 29.10 |
| 150 x 100 x 10.0 | 35.70 | 160 x 80 x 5.0 | 18.00 |
| 160 x 80 x 6.0 | 21.30 | 160 x 80 x 8.0 | 27.90 |
| 200 x 100 x 5.0 | 22.70 | 200 x 100 x 6.0 | 27.00 |
| 200 x 100 x 8.0 | 35.4 | 200 x 100 x 10.0 | 43.60 |
| 250 x 150 x 5.0 | 30.5 | 250 x 150 x 6.0 | 38.2 |
| 250 x 150 x 8.0 | 48.0 | 250 x 150 x 10 | 59.3 |
| 300 x 200 x 6.0 | 48.10 | 300 x 200 x 8.0 | 60.50 |
| 300 x 200 x 10.0 | 75.00 | 400 x 200 x 8.0 | 73.10 |
| 400 x 200 x 10.0 | 90.70 | 400 x 200 x 16 | 142.00 |
Exporter, Stockist and Stockholder of En ISO 10219 S355JOH Steel Pipe, S275joh En 10219 Part 2 Rectangular Hollow Section, ASTM A554 Seamless Pipe, Check DIN 59411 En 10219 S355JOH Structural Hollow Sections composition
Tolerance Chart Of S275J2H Steel Tube
| Specification | OD≤2500 milimeter W.T≤120 milimeter | ||
| OD | ±1％ Minimum:±0.5 milimeter, Maximum: ±10 milimeter | ||
| W.T | -10％ | ||
| Weight | ±6％ | ||
| Length | Length Scope | 4m≤L≤6m | ±500mm |
| Fixed Length | 4m≤L≤6m | +10mm | |
| ＞6m | +15mm | ||
| Height of weld bead for Submerged arc welded hollow sections | When W.T≤14.2, the weld bead height≤3.5When W.T ＞14.2, the welded bead height≤4.8 | ||
| 10219 S235JRH Seamless Pipes | Seamless Black EN 10219 S235JRH CS Pipes |
| EN 10219 S235JRH Welded Pipes | CS 10219 S235JRH Oval Pipes |
| S235JRH EN 10219 Erw Pipes | 10219 S235JRH Grade Casing Pipes |
| S235JRH 10219 Schedule 40 Pipes | ASME B36.19 Grade S235JRH 10219 Pipes |
| 10219 S235JRH CS Schedule 10 Pipes | 10219 S235JRH Double Wall Pipes |
| CS EN 10219 S235JRH Efw Pipes | Epoxy lined EN 10219 S235JRH Pipes |
| 10219 S235JRH Grade Round Pipes | PTFE lined EN 10219 S235JRH Grade Natural Gas Pipes |
| 10219 S355JOH Seamless Pipes | Seamless Black 10219 S355JOH CS Pipes |
| CS 10219 S355JOH Efw Pipes | Epoxy lined EN 10219 S355JOH Pipes |
| 10219 S355JOH Grade Round Pipes | PTFE lined EN 10219 S355JOH Grade Natural Gas Pipes |
| EN 10219 S275joh Welded Pipes | CS EN 10219 S275joh Oval Pipes |
| S275joh EN 10219 Erw Pipes | 10219 S275joh Grade Casing Pipes |
| S275joh EN 10219 Schedule 40 Pipes | ASME B36.19 Grade S275joh 10219 Pipes |
| 10219 S275joh CS Schedule 10 Pipes | 10219 S275joh Double Wall Pipes |
Check specification and sizes of En 10219 Din 59411 S355JOH Pipes, Grade S355JOH EN 10219 CHS, Grade S275joh Circular Hollow Section, En 10219 Din 2395 S355JOH Hot Finished Circular Hollow Section and S275J2H En 10219 Steel Tube
EN10219 Structure Pipe
EN 10219 S355JOH Pipes S355joh Carbon Steel Pipes
S275joh Material
EN 10219 S355JOH Pipes S275J2H Steel Pipes
EN 10219 S355JOH Pipes
S275J2H Steel Tube
S275j2h Material
S275J2H Steel Pipes
S275joh Carbon Steel Exhaust Pipes
S275J2H Steel Structural Tube
En ISO 10219 S355JOH Steel Pipes
S275J2H En 10219 Steel Tube
ASTM A554 Seamless Pipes
En 10219 Din 59411 S355JOH Pipe
Table of Contents