"Government Recognised Star Export House"- info@lgpipeindia.com
EN 10216-2 Pipe
EN 10216-2 is a European grade that covers high-pressure and temperature ranges. The EN 10216-2 Pipe is composed with a superior chemical content of nickel, molybdenum, and chromium. They also have stabilizing agents like titanium, vanadium, and niobium embedded in them. This gives the items in this grade enhanced corrosion and oxidation resistance properties. The EN 10216-2 Boiler Steel Pipes transport corrosive and volatile material through them. These pipes are capable of performing well in high-pressure and temperature setups. An EN 10216-2 P235gh grade is designed with several designations. The letter P describes pressure purpose, H indicates a hollow section, and G suggests the general characteristics of the grade. EN 10216-1 P235tr1 is processed following national and international standards. The components from this grade are seen in oil and gas, boiler equipment, heat exchangers, etc. The P265gh Tc1 Material is designed possessing superior mechanical properties. The material has tensile strength between 360 to 500mpa. They have a minimum yield strength of 235mpa and can be elongated by 25%.
The EN 10216-2 P235gh Tc1 Alloy Steel Seamless Tubes are designed without any welds or seams. These tubes are produced by passing hot steel billets through an extrusion process to precisely shape the metal. P235tr1 Seamless Pipe has enhanced strength and superior load-bearing capacity. These pipes can be processed in a hot or cold rolling process. EN 10216-1 Pipe are designed in schedules between SCH 5 to SCH 160 and XXS. They can be availed in single random, double random, and cut length. The versatile grade produced in India are cheaper than those manufactured in other European counties and USA. This is due to the abundant raw material, quality cheap labour, and excellent logistical systems in the country. If you have any queries or want to know more about the product or its pricing, contact us.
EN 10216-2 P235gh tc1 pipe supplier and exporter in India
EN 10216-2 Grade P265GH Alloy Steel Seamless Tubes and 1.0345 p235gh carbon steel tubes manufacturer in india
Chemical Composition Of P265gh Tc1 Material
| Steel grades | C | Mn | Si | P | Mo b | S | Cr b | Ni b |
Cu b c |
Al tot | Cr+Cu
+Mo+Ni |
Nb b | |
| Steel names | Steel numbers | maximum. | maximum. | maximum. | Max. | maximum. | maximum. | maximum. | maximum. | maximum. | min. | maximum. b | maximum. |
| P195TR2 | 1.0108 | 0,13 | 0,70 | 0,35 | 0,025 | 0,08 | 0,020 | 0,30 | 0,30 | 0,30 | 0,02 d | 0,70 | 0,010 |
| P195TR1 | 1.0107 | 0,13 | 0,70 | 0,35 | 0,025 | 0,08 | 0,020 | 0,30 | 0,30 | 0,30 | - | 0,70 | 0,010 |
| P235TR1 | 1.0254 | 0,16 | 1,20 | 0,35 | 0,025 | 0,08 | 0,020 | 0,30 | 0,30 | 0,30 | - | 0,70 | 0,010 |
| P265TR1 | 1.0258 | 0,20 | 1,40 | 0,40 | 0,025 | 0,08 | 0,020 | 0,30 | 0,30 | 0,30 | - | 0,70 | 0,010 |
| P265TR2 | 1.0259 | 0,20 | 1,40 | 0,40 | 0,025 | 0,08 | 0,020 | 0,30 | 0,30 | 0,30 | 0,02 d | 0,70 | 0,010 |
| P265TR2 | 1.0259 | 0,20 | 1,40 | 0,40 | 0,025 | 0,08 | 0,020 | 0,30 | 0,30 | 0,30 | 0,02 d | 0,70 | 0,010 |
EN 10216-2 Boiler Steel Pipes Grades
- P195TR1
- P195TR2
- P235TR1
- P235TR2
- P265TR1
- P265TR2
Stockist, Stockholder and distributors of EN 10216-2 Material, DIN 17175 EN 10216-2 Boiler Steel Pipes, Check EN 10216-2 Grade P265GH Tubes specifications
Specification Chart Of EN 10216-2 P235gh Pipes
| EFW Pipes sizes | 5.0 – 1219.2 milimeter |
|---|---|
| Standards | EN, DIN, AISI, JIS, ASME GB, IS, ASTM Pipes |
| Seamless Pipes Sizes | 4 to 219 milimeterW. T.: 0.5 to 20 milimeter |
| Welded Pipes Sizes | 5.0 – 1219.2 milimeter |
| Schedules | SCH20, SCH10, SCH160, SCH120, SCH30, SCH40, SCH80, SCH5, STD, SCH10S, SCH140, SCH40S, XXS XS, SCH80, SCH60, |
| Seamless Tube Sizes | 3.35 OD To 101.6 milimeter OD |
| End | Plain End, Beveled End, Treaded Pipes & Tube |
| Welded Tube Sizes | 6.35 milimeter OD To 152 milimeter OD |
| wall thickness | 0.020 –0.220 inch |
| Types | Seamless, Welded, ERW, Fabricated , EFW Pipes, Hydraulic, ‘U’ bent or Hollow, LSAW, Straight Tube, Boiler, Tube Coil, Rectangular, Round, Square Tube etc |
| Bwg & Swg | 12 Swg., 10 Swg., 14 Swg., 18 Swg., 16 Swg., 20 Swg. |
| Manufacturers of EN 10083-2 Pipe |
|
| Length | Double , Single ,Standard & Cut length Pipes & Tube |
| Finish | MF Polished, AP, BA |
Mechanical Properties Of EN 10216-2 P235gh Tc1 Seamless Pipes
| Steel grades | Impact properties | Tensile properties | ||||||||
| Steel names | Steel numbers | min average absorbed energy KV J at a temp of °C c | Upper yield strength ReH b min. for Wall thk T milimeter | Tensile Strength Rm | Elongation A min. %
b c |
|||||
| l | t | T =16 | 16 < T =40 | 40 < T =60 | ||||||
| 0 | -10 | 0 | Mpa | Mpa | Mpa | Mpa | l | t | ||
| P195TR2 | 1.0108 | 40 | 28 d | 27 | 195 | 185 | 175 | 320 to 440 | 27 | 25 |
| P195TR1 e | 1.0107 | - | - | - | 195 | 185 | 175 | 320 to 440 | 27 | 25 |
| P235TR2 | 1.0255 | 40 | 28 d | 27 | 235 | 225 | 215 | 360 to 500 | 25 | 23 |
| P235TR1 e | 1.0254 | - | - | - | 235 | 225 | 215 | 360 to 500 | 25 | 23 |
| P265TR2 | 1.0259 | 40 | 28 d | 27 | 265 | 255 | 245 | 410 to 570 | 21 | 19 |
| P265TR1 e | 1.0258 | - | - | - | 265 | 255 | 245 | 410 to 570 | 21 | 19 |
Check EN 10216-2 pipe dimensions, sizes and equivalent astm material
| Description | Price List |
| EN 10216 140mm seamless steel pipe | US $720.00-$765.00 / Ton |
| S235 EN 10216-1 6 inches x length 5.8m x thickness 4.5mm pipe galvanized steel tubes | US $685.00-$925.00 / Ton |
| DIN EN 10216 140mmgalvanized pipe | US $550.00-$700.00 / Ton |
EN 10216-2 P235gh Tc1 Alloy Steel Seamless Tubes Equivalent
Equivalent Materials: 243,15Mo3, TU 15 D 3, 20MoG, 15MoG, SA209T1, SA209T1a, STBA12, P1, STPA12, STBA13, C-0.5Mo
Equivalent Standards: BS 3059, DIN 17175, ASTM A213, ASTM A335, ASME SA213, NF A 49-213, JIS G3462, ASTM A209, JIS G3458
| Products | DIN | En | BS | NFA | ASTM | ASME |
|---|---|---|---|---|---|---|
| EN 10216-1 Gr P195TR1 | − | EN 10216-1 Gr P195TR1 | − | − | − | − |
| EN 10216-1 Gr P195TR2 | − | EN 10216-1 Gr P195TR2 | − | − | − | − |
| EN 10216-1 Gr P235TR1 | − | EN 10216-1 Gr P235TR1 | − | − | − | − |
| EN 10216-1 Gr P235TR2 | − | EN 10216-1 Gr P235TR2 | − | − | − | − |
| EN 10216-1 Gr P265TR1 | − | EN 10216-1 Gr P265TR1 | − | − | − | − |
| EN 10216-1 Gr P265TR2 | − | EN 10216-1 Gr P265TR2 | − | − | − | − |
| EN 10216-2 Gr X10CrMoVNb9-1 | − | EN 10216-2 Gr X10CrMoVNb9-1 | − | − | − | − |
| EN 10216-2 Gr P265GH | − | EN 10216-2 Gr P265GH | − | − | − | − |
| EN 10216-2 Gr 14MoV6-3 | − | EN 10216-2 Gr 14MoV6-3 | − | − | − | − |
| EN 10216-2 Gr 7CrWVMoNb9-6 | − | EN 10216-2 Gr 7CrWVMoNb9-6 | − | − | − | − |
| EN 10216-2 Gr 7CrMoVTiB10-10 | − | EN 10216-2 Gr 7CrMoVTiB10-10 | − | − | − | − |
| EN 10216-2 Gr 16Mo3 | − | EN 10216-2 Gr 16Mo3 | − | − | − | − |
| EN 10216-2 Gr 10CrMo5-5 | − | EN 10216-2 Gr 10CrMo5-5 | − | − | − | − |
| EN 10216-2 Gr 13CrMo4-5 | − | EN 10216-2 Gr 13CrMo4-5 | − | − | − | − |
| EN 10216-2 Gr 11CrMo9-10+QT | − | EN 10216-2 Gr 11CrMo9-10+QT | − | − | − | − |
| EN 10216-2 Gr 25CrMo4 | DIN 17200 Gr 25CrMo4 | EN 10216-2 Gr 25CrMo4 | NFA EN . Gr 25CrMo4 | − | − | − |
| EN 10216-2 Gr X11CrMo5+I | − | EN 10216-2 Gr X11CrMo5+I | − | − | − | − |
| EN 10216-2 Gr X11CrMo5+NT1 | − | EN 10216-2 Gr X11CrMo5+NT1 | − | − | − | − |
| EN 10216-2 Gr X11CrMo5+NT2 | − | EN 10216-2 Gr X11CrMo5+NT2 | − | − | − | − |
| EN 10216-2 Gr P195GH | − | EN 10216-2 Gr P195GH | − | − | − | − |
| EN 10216-2 Gr P235GH | − | EN 10216-2 Gr P235GH | − | − | − | − |
| EN 10216-3 Gr P460NH | DIN 17178/17179 Gr FGP 47 W | EN 10216-3 Gr P460NH | − | − | − | − |
| EN 10216-3 Gr P460NL1 | DIN 17178/17179 Gr FGP 47 T | EN 10216-3 Gr P460NL1 | − | ASTM A 381 Gr Y 65 | ASME SA 381 Gr Y 65 | − |
| EN 10216-3 Gr P460NL2 | DIN 17178/17179 Gr FGP 47 E | EN 10216-3 Gr P460NL2 | − | − | − | − |
| 10216-3 Gr P275NL1 | DIN 17179 Gr FGP 28 T | 10216-3 Gr P275NL1 | NFA A49-2452) Gr TS 42-BT | ASTM A 662 Gr B | ASME SA 662 Gr B | − |
| 10216-3 Gr P275NL2 | DIN 17179 Gr FGP 28 E | 10216-3 Gr P275NL2 | − | ASTM A 707 Gr L2, Class 1 | ASME SA 707 Gr L2, ClSAss 1 | − |
| EN 10216-3 Gr P355N | DIN 17179 Gr FGP 36 | EN 10216-3 Gr P355N | NFA A 49-326 Gr TU 52-BT | ASTM A381 Gr Y 52 | ASME SA381 Gr Y 52 | − |
| 10216-3 Gr P355NH | DIN 17179 Gr FGP 36 W | 10216-3 Gr P355NH | NFA A 36-2051) Gr A 52 FP | ASTM A 662 Gr C | ASME SA 662 Gr C | − |
| 10216-3 Gr P355NL1 | DIN 17179 Gr FGP 36 T | EN 10216-3 Gr P355NL1 | NFA A 36-2071) Gr A 510 FP 1 | ASTM A 707 Gr L2,Class 2 | ASME SA 707 Gr L2,ClSAss 2 | − |
| 10216-3 Gr P355NL2 | DIN 17179 Gr FGP 36 E | EN 10216-3 Gr P355NL2 | − | − | − | − |
| EN 10216-3 Gr P460N | DIN 17178/17179 Gr FGP 47 | EN 10216-3 Gr P460N | − | ASTM A 225 Gr C | ASME SA 225 Gr C | − |
| 10216-4 Grade P215NL | − | 10216-4 Grade P215NL | − | − | − | − |
| EN 10216-4 Grade P265NL | − | EN 10216-4 Grade P265NL | − | − | − | − |
EN 10216-2 pipe manufacturer, Refer EN 10216-2 P235gh High Pressure Steel Pipes Dimension
P265gh Tc1 Material
EN 10216-2 Boiler Steel Pipes
EN 10216-2 Pipes
EN 10216-2 P235gh Pipes
EN 10216-2 P235gh Tc1 Pipes
EN 10216-2 P235gh Tc1 Alloy Steel Seamless Tubes
1.0345 Carbon Steel Material
EN 10216-1 P235tr1 Pipes
EN 10216-1 Pipes
P235tr1 Seamless Pipes
EN 10216 Pipe
EN 10216-2 P235gh TC1 Heat Exchanger Tube
1.0345 Carbon Steel Material Tensile Strength
| Products | Yield Strength | Tensile Strength | Elongation A5 min | |||
|---|---|---|---|---|---|---|
| MPa min | ksi min | MPa min | MPa min | ksi min | Percentage | |
| 10216-1 Grade P195TR1 | 320 | 440 | – | 27 | ||
| 10216-1 Grade P195TR2 | 320 | 440 | – | 27 | ||
| 10216-1 Grade P235TR1 | 360 | 500 | – | 25 | ||
| 10216-1 Grade P235TR2 | 360 | 500 | – | 25 | ||
| 10216-1 Grade P265TR1 | 410 | 570 | – | 21 | ||
| 10216-1 Grade P265TR2 | 410 | 570 | – | 21 | ||
| 10216-2 Grade X10CrMoVNb9-1 | 630 | 830 | – | 19 | ||
| 10216-2 Grade P265GH | 410 | 570 | – | 23 | ||
| 10216-2 Grade 14MoV6-3 | 460 | 610 | – | 20 | ||
| 10216-2 Grade 7CrWVMoNb9-6 | 510 | 470 | – | 20 | ||
| 10216-2 Grade 7CrMoVTiB10-10 | 565 | 840 | – | 17 | ||
| 10216-2 Grade 16Mo3 | 450 | 600 | – | 22 | ||
| 10216-2 Grade 10CrMo5-5 | 410 | 560 | – | 22 | ||
| 10216-2 Grade 13CrMo4-5 | 440 | 590 | – | 22 | ||
| 10216-2 Grade 11CrMo9-10+QT | 540 | 680 | – | 20 | ||
| 10216-2 Grade 25CrMo4 | 900 | – | – | 12 | ||
| 10216-2 Grade X11CrMo5+I | 430 | 580 | – | 22 | ||
| 10216-2 Grade X11CrMo5+NT1 | 480 | 640 | – | 20 | ||
| 10216-2 Grade X11CrMo5+NT2 | 570 | 740 | – | 18 | ||
| 10216-2 Grade P195GH | 320 | 440 | – | 27 | ||
| 10216-2 Grade P235GH | 360 | 500 | – | 25 | ||
| 10216-3 Gr P460NH | 560 | 730 | – | 19 | ||
| 10216-3 Gr P460NL1 | 560 | 730 | – | 19 | ||
| 10216-3 Gr P460NL2 | 560 | 730 | – | 19 | ||
| 10216-3 Gr P275NL1 | 390 | 530 | – | 24 | ||
| 10216-3 Gr P275NL2 | 390 | 530 | – | 24 | ||
| 10216-3 Gr P355N | 490 | 650 | – | 22 | ||
| 10216-3 Gr P355NH | 490 | 650 | – | 22 | ||
| 10216-3 Gr P355NL1 | 490 | 650 | – | 22 | ||
| 10216-3 Gr P355NL2 | 490 | 650 | – | 22 | ||
| 10216-3 Gr P460N | 560 | 730 | – | 19 | ||
| 10216-4 Gr P215NL | 360 | 480 | – | 25 | ||
| 10216-4 Gr P265NL | 410 | 570 | – | 24 | ||
| Designation of Diameter | O/D | Nominal Wall Thickness | ||||||||||||||||||
| DIA | SCH.5S | SCH.5 | SCH 10S | SCH.10 | SCH.20S | SCH.30 | SCH.40S | SCH.40 | SCH 60 | |||||||||||
| (A) | (B) | Meter
MM |
Wall
Thk |
Weight Kg/Mtr | Wall
Thk |
Weight Kg/Mtr | Wall
Thk |
Weight Kg/Mtr | Wall
Thk |
Weight Kg/Mtr | Wall
Thk |
Weight Kg/Mtr | Wall
Thk |
Weight Kg/Mtr | Wall
Thk |
Weight Kg/Mtr | Wall
Thk |
Weight Kg/Mtr | Wall
Thk |
Weight Kg/Mtr |
| 6 | 1/8 | 10.3 | 1 | 0.23 | 1.2 | 0.27 | 1.5 | 0.33 | 1.73 | 0.37 | ||||||||||
| 8 | 1/4 | 13.7 | 1.2 | 0.37 | 1.65 | 0.49 | 2 | 0.58 | 2.24 | 0.64 | ||||||||||
| 10 | 3/8 | 17.2 | 1.2 | 0.47 | 1.65 | 0.63 | 2 | 0.74 | 2.31 | 0.87 | ||||||||||
| 15 | 1/2 | 21.3 | 1.65 | 0.01 | 1.65 | 0.81 | 2.11 | 1.02 | 2.11 | 1.02 | 2.5 | 1.15 | 2.77 | 1.29 | ||||||
| 20 | 3/4 | 26.7 | 1.65 | 1.03 | 1.65 | 1.03 | 2.11 | 1.3 | 2.11 | 1.3 | 2.5 | 1.49 | 2.87 | 1.71 | ||||||
| 25 | 1 | 33.4 | 1.65 | 1.31 | 1.65 | 1.31 | 2.77 | 2.13 | 2.77 | 2.13 | 3 | 2.24 | 3.38 | 2.54 | ||||||
| 32 | 11/4 | 24.2 | 1.65 | 1.67 | 1.65 | 1.67 | 2.77 | 2.73 | 2.77 | 2.73 | 3 | 2.9 | 3.56 | 3.44 | ||||||
| 40 | 11/2 | 48.3 | 1.65 | 1.93 | 1.65 | 1.93 | 2.77 | 3.16 | 2.77 | 3.16 | 3 | 3.35 | 3.68 | 4.11 | ||||||
| 50 | 2 | 60.3 | 1.65 | 1.93 | 1.65 | 2.42 | 2.77 | 3.99 | 2.77 | 3.99 | 3.5 | 4.9 | 3.91 | 5.52 | ||||||
| 65 | 21/2 | 73 | 2.11 | 3.75 | 2.11 | 3.75 | 3.05 | 5.34 | 3.05 | 5.34 | 3.5 | 6 | 5.16 | 8.77 | ||||||
| 80 | 3 | 88.9 | 2.11 | 4.59 | 2.11 | 4.59 | 3.05 | 6.56 | 3.05 | 6.56 | 4 | 8.37 | 5.49 | 11.47 | ||||||
| 90 | 31/2 | 101.6 | 2.11 | 5.25 | 2.11 | 5.25 | 3.05 | 7.53 | 3.05 | 7.53 | 4 | 9.62 | 5.74 | 13.78 | ||||||
| 100 | 4 | 114.3 | 2.11 | 5.93 | 2.11 | 5.93 | 3.05 | 8.5 | 3.05 | 8.5 | 4.5 | 12.18 | 6.02 | 6.32 | ||||||
| 125 | 5 | 141.3 | 2.77 | 9.61 | 2.77 | 9.61 | 3.4 | 11.74 | 3.43 | 11.74 | 5 | 16.8 | 6.55 | 2210 | ||||||
| 150 | 6 | 168.3 | 2.77 | 11.47 | 2.77 | 11.47 | 3.4 | 14.04 | 3.43 | 14.04 | 5.5 | 22.08 | 7.11 | 28.69 | ||||||
| 200 | 8 | 219.1 | 2.77 | 15 | 2.77 | 15 | 3.76 | 20.77 | 3.76 | 20.27 | 6.35 | 33.82 | 7.04 | 37.38 | 8.18 | 43.2 | 10.81 | 53.9 | ||
| 250 | 10 | 273.1 | 3.4 | 22.95 | 3.4 | 22.95 | 4.19 | 28.2 | 4.19 | 28.2 | 6.35 | 42.41 | 7.8 | 51.81 | 9.27 | 61.22 | 12.2 | 82.8 | ||
| 300 | 12 | 323.9 | 3.96 | 31.72 | 4.19 | 33.6 | 4.57 | 36.54 | 4.57 | 36.54 | 6.35 | 50.48 | 8.38 | 66.2 | 9.53 | 75.01 | 10.31 | 80.94 | 14.27 | 110.62 |
| 350 | 14 | 355.6 | 3.96 | 34.86 | 4.78 | 41.99 | 6.35 | 55.53 | 7.92 | 68.95 | 9.53 | 82.58 | 9.53 | 82.58 | 11.13 | 96 | 15.06 | 128.42 | ||
| 400 | 16 | 406.4 | 4.19 | 42.2 | 4.78 | 48.07 | 6.35 | 63.61 | 7.92 | 79.03 | 9.53 | 94.7 | 9.53 | 94.7 | 12.7 | 125.2 | 16.66 | 162.59 | ||
| 450 | 18 | 457.2 | 4.19 | 47.46 | 4.78 | 54.15 | 6.35 | 71.69 | 7.92 | 89.1 | 11.13 | 124.32 | 9.53 | 106.83 | 14.27 | 158.27 | 19.05 | 209 | ||
| 500 | 2C | 508 | 4.78 | 60.23 | 5.54 | 69.7 | 6.35 | 79.76 | 9.53 | 118.93 | 12.7 | 157.51 | 9.53 | 118.9 | 15.06 | 185.89 | 2062 | 251.65 | ||
| 550 | 22 | 558.8 | 4.78 | 65.95 | 5.54 | 76.75 | 6.35 | 87.84 | 9.53 | 131.07 | 12.7 | 173.66 | 9.53 | 131.07 | 15.88 | 216.04 | 22.23 | 298.55 | ||
| 600 | 24 | 609.6 | 5.54 | 83.8 | 6.35 | 95.92 | 6.35 | 95.92 | 9.53 | 143.2 | 14.27 | 212.72 | 9.53 | 143.2 | 17.45 | 258.74 | 24.59 | 360.21 | ||
| 650 | 26 | 660.4 | 7.92 | 129.4 | 12.7 | 205.97 | 9.53 | 155.32 | ||||||||||||
| 700 | 28 | 711.2 | 7.92 | 139.47 | 12.7 | 222.13 | 15.88 | 276.48 | 9.53 | 167.44 | ||||||||||
| 750 | 3C | 762 | 6.35 | 120.15 | 7.92 | 149.55 | 7.92 | 149.55 | 12.7 | 238.28 | 15.88 | 296.68 | 9.53 | 179.56 | ||||||
| 800 | 32 | 812.8 | 7.92 | 159.62 | 12.7 | 254.44 | 15.88 | 316.88 | 9.53 | 191.69 | 17.48 | 348.11 | ||||||||
| 850 | 34 | 863.6 | 7.92 | 169.64 | 12.7 | 270.5 | 15.88 | 336.96 | 9.53 | 203.74 | 17.48 | 370.22 | ||||||||
| 900 | 36 | 914.4 | 7.92 | 179.77 | 12.7 | 286.75 | 15.88 | 357.28 | 9.53 | 215.93 | 19.05 | 427.09 | ||||||||
Tolerance Chart Of EN 10216-1 Pipe
| Execution | Size Range | OD Tolerance | Wall tolerance |
|---|---|---|---|
| Hot-rolled Tube | OD – 80 milimeterOD > 80 milimeterWall < 12 milimeterWall - 12 milimeter | ± 0.4 milimeter± 0.5 % of OD | ± 0.7 milimeter± (5 % x wallthickness + 0.1 milimeter |
| Hot-rolled peeled tube | All sizesWall < 12 milimeterWall - 12 milimeter | + 0.25/- 0 milimeter | ± 0.8 milimeter± (5 % x wall thickness+ 0.2 milimeter) |
| Cold Worked tubecold-rolled or cold-drawn | OD < 40 milimeterOD 40 - 80 milimeterOD > 80 Wall Thickness< 6 milimeter Wall Thickness6 - 8 milimeter Wall Thickness > 8 | + 0.30/- 0 milimeter*+ 0.35/- 0 milimeter*+ 0.40/- 0 milimeter* | ± 0.30 milimeter± 0.35 milimeter± 0.40 milimeter |
- Chemical processing
- Reactor core
- Steam systems
- Refineries
- Gas pipeline control lines
- Energy plants
- Control rod components
Stock Of EN 10216-2 P235gh Tc1 Heat Exchanger Tube
| 10216 Pipe | 4 inch 10216-2 P235tr2 TC2 Seamless Pipe |
| 10216-2 P235tr2 TC2 Boiler Tube | P235tr2 10216-2 Pipe |
| 10216-2 p265gh Seamless Steel Pipe | P235tr2 Carbon Steel Cold Drawn Tubes |
| 10216-2 P235gh TC2 Pipe | 10216-2 P235gh TC1 Cold Drawn Tubes |
| P235tr2 10216-2 ERW Pipe | Schedule 5S 10216-2 P235tr2 Tc1 Seamless Tube |
| 10216-2 P235tr2 EFW Pipe | Schedule 40 P235tr2 Tc1 Pipe |
| 10216-2 P235tr2 Tc1 Cold Drawn Seamless Pipe | P235tr2 10216-2 Precision Pipe |
| 10216 Seamless Steel Precision Pipe | High pressure 10216-2 P235tr2 Pipe |
| P235tr2 Tc1 Cold Drawn Seamless Tubing | 10216-2 P235tr2 Electropolished Pipe |
| Carbon Steel Gr P235tr2 Custom Pipe | 10216 Cold Drawn Pipe |
| P235tr2 Carbon Steel Round Pipe | P235tr2 10216-2 Exhaust Pipe |
| 10216-2 P235tr2 Square Pipe | Carbon Steel P235tr2 Thin Wall Pipe |
| P235tr2 10216-2 Rectangular Pipe | Small diameter Steel Gr P235tr2 pipe |
| Carbon Steel P235tr2 Hexagonal Pipe | Steel Gr P235tr2 Tc1 Pipe material |
| Steel Gr P235tr2 Bush Hex Pipe | Carbon Steel Gr P235tr2 Tc1 Precision Steel Pipe |
| Steel Gr P235tr2 Tc1 Fabricated Pipe | Carbon Steel Gr P235tr2 Annealed pipe |
| Carbon Steel Gr P235tr2 Tc1 Beveled End Pipes | 10216-2 p265gh Rectangle Pipe |
| 10216-2 P235tr2 Cold Drawn Pipes | Cold Drawn 10216 Pipes |
Table of Contents