EN 10083-2 Pipe | DIN 17200 C45/ C40/ C35/ C22E Seamless Pipe supplier

EN 10083-2 is a carbon mild steel grade. An EN 10083-2 Pipe is designed with a content of carbon, silicon, manganese, phosphorous, sulfur, and molybdenum. The superior content embedded in the EN 10083-2 Pipes gives them good resistance to reducing and corrosive media across different stress-induced setups. These pipes are seen in low and high-temperature setups. The EN 10083 Steel Pipe can be both hot and cold rolled to suit different product types. These cold rolled pipes have a smooth surface finish and tolerance, but the hot rolled pipes are cheaper. EN Iso 10083-2 Pipes are designed with superior mechanical properties. These pipes have a tensile strength of a minimum of 580mpa and can be readily elongated by 16% in the system.

The components of the EN 10083-2 are designated different grades. The EN 10083 C40 Pipe has similar characteristics to low carbon grade pipes. The pipes in this grade are tempered and quenched. C40 EN 10083 Pipes has a plain, beveled and threaded end. These pipes can be shaped in an array of cross-sections to meet different project requirements. The EN 10083 C45 Steel Pipe possesses enhanced toughness and hardness in different systems. These pipes are generally made in seamless and welded configurations. The C45 EN 10083 Seamless Pipe is a high-strength grade designed with superior load-bearing capacity. These pipes are produced by an extrusion process where steel billets are passed through the metal to precisely shape them. A 42crmo4 EN 10083 Welded Pipe is produced by rolling the metal followed by welding pieces of sheets or strips in different configurations. The piping modules of this grade produced in India are of the highest quality and are cheaper as compared to other European countries and the USA. This is because India has abundant availability of raw material and quality cheap labour. Contact us for any information.

EN 10083-2 C22E Carbon Steel Seamless Pipe and DIN 17200 C45 Steel Pipe supplier in India

Table of Contents

EN 10083 C45 Steel Pipe Specification
EN 10083-2 Material
Price List Of EN 10083 C45e Carbon Steel Seamless Pipe
EN 10083-2 C45 Chemical Composition
C45 EN 10083 Seamless Pipes Mechanical Properties

EN 10083-2 C22 Equivalent
Types of EN 10083 Steel Pipe
Standards Of EN 10083 C40 Pipe
42crmo4 EN 10083 Welded Pipes Sizes

Manufacturer of EN 10083-2 C45E Carbon Steel Seamless Pipe and C35 Steel Pipe

EN 10083 C45 Steel Pipe Specification

Standard	EN, DIN, AISI, JIS, ASME GB, IS, ASTM Pipes
Welded Pipes Size	5.0 – 1219.2 milimeter
Seamless Pipes Size	4 to 219 milimeterW. T.: 0.5 to 20 milimeter
EFW Pipes size	5.0 – 1219.2 milimeter
Schedule	SCH80, SCH5, STD, SCH20, SCH10, SCH160, SCH120, SCH30, SCH40, SCH10S, SCH140, SCH40S, XXS XS, SCH80, SCH60,
Seamless Tube Size	3.35 OD To 101.6 milimeter OD
Swg & Bwg	12 Swg., 10 Swg., 14 Swg., 18 Swg., 16 Swg., 20 Swg.
Length	Single , Double , Standard & Cut length Pipes & Tube
Finish	MF AP, Polished, BA
Welded Tube Size	6.35 milimeter OD To 152 milimeter OD
wall thickness	0.020 –0.220 inch
Manufacturers of EN 10083-2 Pipes	Tubacex Tubos Inoxidables S.A., Spain Kobe Special Tube, Japan Sumitomo Metals, Japan Nippon Steel Corporation, Japan Sanyo Special Steel, Japan Schoeller Bleckmann, Austria Seah Steel Corporation, Korea
End	Beveled End, Plain End, Treaded Pipes & Tube
Type	Seamless, Welded, ERW, Fabricated , EFW Pipes, Hydraulic, ‘U’ bent or Hollow, LSAW, Straight Tube, Boiler, Tube Coil, Rectangular, Round, Square Tube etc

Refer weight and Dimension chart of EN 10083-2 Grade C22E Steel Pipe, EN 10083-2 Grade C45 Pipes & C40 Carbon Steel Seamless Pipes

Get instant delivery Of EN 10083 C45 Steel Pipes, Thickness Chart Of EN 10083 C45e Carbon Steel Seamless Pipes, C45 EN 10083 Seamless Pipes Suppliers In Mumbai. India.

EN 10083-2 Material

Alloy Steel
Low Temperature Alloy Steel
Carbon Steel
High Temperature Carbon Steel
Low Temperature Carbon Steel
High Temperature Alloy Steel

View updated price list of EN 10083-2 Steel Pipe, DIN 17200 C45 Structural Steel Pipe and C40 Steel Tube

LG Pipes and Tubes is an PED Approved EN 10083-2 Pipe Manufacturer in India & EN 10083 C40 Pipes distributor, check 42crmo4 EN 10083 Welded Pipes Price Per Kg in Mumbai

Price List Of EN 10083 C45e Carbon Steel Seamless Pipe

Description	Price List
10083 41CrS4 QT Steel / hot rolled structure steel pipes	US $1200-$1500 / Metric Ton
Cold drawn steel 10083 41Cr4 alloy seamless steel pipes	US $800.00-$2000 / Ton
10083 C35 Carbon steel standard length carbon steel round pipes and tubes	US $700.00-$850.00 / Ton

We are Largest EN 10083-2 Seamless Tube Suppliers in India. Check chemical Properties of EN 10083-2 Welded Tube, EN 10083-2 ERW Tube and C40 EN 10083 Pipes

EN 10083-2 C45 Chemical Composition

Carbon	Manganese	Silicon	Phosphorous	Molybdenum	Sulphur	Chromium	Nickel	Copper	Others
0.37-0.44	0.50-0.80	max 0.40	0.045	max 0.10	0.045	max 0.40	max 0.40	–	–

Grades	Si	C	Mn	P	S	Cr	Ni	Mo	Cr + Mo + Ni
C551)	0,10 - 0,40	0,52 - 0,60	0,60 - 0,90	0.045	0.045	max. 0,40	0.40	max. 0,10	0.63
C601)	0,10 - 0,40	0,57 - 0,65	0,60 - 0,90	0.045	0.045	max. 0,40	0.40	max. 0,10	0.63
34CrMo4	0,10 - 0,40	0,30 - 0,37	0,60 - 0,90	0.025	0.035	0,90 - 1,20	-	0,15 - 0,30	-
42CrMo4	0,10 - 0,404)	0,38 - 0,45	0,60 - 0,90	0.025	0.035	0,90 - 1,20	-	0,15 - 0,30	-
50CrMo4	0,10 - 0,404)	0,46 - 0,54	0,50 - 0,80	0.025	0.035	0,90 - 1,20	-	0,15 - 0,30	-
C22E1)	max. 0,40	0,17 - 0,24	0,40 - 0,70	0.045	0.045	max. 0,40	0.40	max. 0,10	0.63
C251)	0,10 - 0,40	0,22 - 0,29	0,40 - 0,70	0.045	0.045	max. 0,40	0.40	max. 0,10	0.63
C301)	0,10 - 0,40	0,27 - 0,34	0,50 - 0,80	0.045	0.045	max. 0,40	0.40	max. 0,10	0.63
C351)	0,10 - 0,40	0,32 - 0,39	0,50 - 0,80	0.045	0.045	max. 0,40	0.40	max. 0,10	0.63
C401)	0,10 - 0,40	0,37 - 0,44	0,50 - 0,80	0.045	0.045	max. 0,40	0.40	max. 0,10	0.63
C451)	0,10 - 0,40	0,42 - 0,50	0,50 - 0,80	0.045	0.045	max. 0,40	0.40	max. 0,10	0.63
C501)	0,10 - 0,40	0,47 - 0,55	0,60 - 0,90	0.045	0.045	max. 0,40	0.40	max. 0,10	0.63
C67S	0,15 - 0,35	0,65 - 0,73	0,60 - 0,90	0.025	0.025	max. 0,40	0.40	max. 0,10	-
C75S	0,15 - 0,35	0,70 - 0,80	0,60 - 0,90	0.025	0.025	max. 0,40	0.40	max. 0,10	-
51CrV42)	max. 0,40	0,47 - 0,55	0,70 - 1,10	0.025	0.025	0,90 - 1,20	0.40	max. 0,10	-
58CrV43)	max. 0,40	0,55 - 0,62	0,70 - 1,10	0.025	0.025	0,90 - 1,20	-	-	-

LG Pipes and Tubes is Largest EN 10083 Steel Pipes Suppliers in India. We Have Ready Stock of EN 10083 Material, EN Iso 10083-2 Pipes and EN 10083-2 Seamless Pipes

C45 EN 10083 Seamless Pipes Mechanical Properties

Yield Strength		Elongation A5 minimum	Tensile Strength
MPa minimum	ksi minimum	Percentage	MPa minimum	MPa minimum	ksi minimum
		16	580	–	–

Grade	Tensile strength		minimum. yield strength		minimum. total elongation1)
[MPa]	[MPa]	[%]
e ≤ 16	e > 16	e ≤ 16	e > 16	e ≤ 16	e > 16
C35 + C35E	minimum. 550	minimum. 520	300	270	18	19
C40 + C40E	minimum. 580	minimum. 550	320	290	16	17
C45 + C45E	minimum. 620	minimum. 580	340	305	14	16
C50 + C50E	minimum. 650	minimum. 610	355	320	12	14
C55 + C55E	minimum. 680	minimum. 640	370	330	11	12
C60 + C60E	minimum. 710	minimum. 670	380	340	10	11
34CrMo4	1000-1200	900-1100	800	650	11	12
42CrMo4	1100-1300	1000-1200	900	750	10	11
50CrMo4	1100-1300	1000-1200	900	750	9	10
C67S	max. 6402)	max. 6402)	-	-	162)	162)
C75S	max. 6402)	max. 6402)	-	-	152)	152)
C22E	minimum. 430	minimum. 410	240	210	24	25
C25	minimum. 470	minimum. 440	260	230	22	23
C30	minimum. 510	minimum. 480	280	250	20	21
51CrV4	max. 7002)	-	510	-	132)	132)
58CrV4	1000 - 1300	-	700	-	82)	53)

LG Pipes and Tubes is an ONGC certified EN 10083-2 Pipe Suppliers in India & 10083-2 Welded Pipes Stockist in Mumbai.

Stockist, Distributors and Exporter of EN 10083-2 Material Grade C40/c45e Cs Pipe and Bs En 10083-2 C22e Pipes with Exceptional standard, sizes and Quality

EN 10083-2 C22 Equivalent

DIN	BS	EN	ASTM	NFA	ASME
DIN 17204 Grade C45	NFA A35-552 Grade XC 48 H 1	10083-2 Grade C45	ASME SA 519 Grade 1045	ASTM A519 Grade 1045	–

EN 10083-2 ERW Pipes Supplier in India, Manufacturer Of En 10083-2 C22e Pipes In Mumbai, One Stop Shop For All EN 10083-2 GRADE C45 Carbon Steel Seamless Pipes.

Types of EN 10083 Steel Pipe

EN 10083-2 Pipe

EN 10083 C45 Steel Pipes

EN 10083 C45e Carbon Steel Seamless Pipes

C45 EN 10083 Seamless Pipes

EN 10083 C40 Pipes

42crmo4 EN 10083 Welded Pipes

C40 EN 10083 Pipes

EN 10083 Steel Pipe

EN 10083 Material

EN 10083-2 Tubes

EN Iso 10083-2 Pipes

Standards Of EN 10083 C40 Pipe

Europe	DE	Material no.	FR	US	IT	JP	FK1)
DIN EN ISO	NAF	DIN	UNI	JIS G 4051,	SAE
683-1 683-2 683-3	35-5523) 37-502	172003) 172043)	6403, 8893, 7356	JIS G 5111	J 403, J 404
C35 + C35E	C35	1.1181	C 35	1035	C35	S 35 C	B
C40 + C40E	C40	1.0511	C 40	1038, 1040	-	S 40 C	B
C45 + C45E	C45	1.1191	C 45	1042, 1045	C45	S 45 C	B
C50 + C50E	C50	1.0540	C 50	1049, 1050	-	S 50 C	B
C55 + C55E	C55	1.0535	C 55	1055	C55	S 55 C	C
C60 + C60E	C60	1.0601	C 60	1060	C60	S 58 C	C
34CrMo4	34 Cr Mo 4	1.7220	34 CD 4	4130	34CrMo4	SCM432	C
42CrMo4	-	1.7225	42 CD 4	4140	42CrMo4	SCM440	D
50CrMo4	50CrMo4	1.7228	50 CD 4	4150	42CrMo4	SCM445	D
C22E2)	C22	1.1151	C 20	1023	-	S 20 C, S 22 C	A
C25	C25	1.0406	-	1025	-	S 25 C	A
C30	-	1.0528	C 30	1030	C30	S 30 C	B
EN 10132-4	NFA 37-502, 35-571	DIN 172223)	UNI 3545	JIS G 3311	SAE J 403, J 404
C67S	C 67	1.1231	XC 68	1070	-	S 70 CM	D
C75S	C 75	1.1248	XC 75	1074	-	-	D
51CrV4	50 Cr V 4	1.8159	50 CV 4	6150	50 CrV 4	SUP 10 M	D
58CrV42)	-	1.8161	-	-	-	-	D

42crmo4 EN 10083 Welded Pipes Sizes

10083-2 Grade C22 Seamless Pipes Size	4 to 219milimeter W. T.: 0.5 to 20milimeter
Carbon Steel 10083-2 Grade C22R 10083-2 Grade C22 Welded Pipes Size	5.0 milimeter – 1219.2 milimeter
Steel C45 10083-2 Grade C22 EFW Pipes size	5.0 milimeter – 1219.2 milimeter