ST37 Pipe

ST37 Pipe

ST37 is a low carbon grade of steel. A ST37 pipe is designed with a chemical composition consisting of carbon, silicon, manganese, nitrogen, phosphorous, and sulfur. The outstanding content embedded in them gives them good corrosion and oxidation resistance properties across different systems. The Steel Pipes ST37 is designed in different standards and dimensions to meet different applications. These pipes can be processed in hot and cold rolling process. ST37 Pipes have good forming properties and can be easily machined or drawn into correct dimensions. Welding the pipes in this grade is very simple due to the lower content of carbon embedded within them. The Carbon Steel DIN 2391 ST 37 Pipes can be designed in a range of sizes with an outer diameter ranging between 4mm up to 60mm. These pipes can be availed in lengths up to 6000mm with different pressure grades and schedules to deal with high-stress applications.

The ST37 Tube is designed with superior mechanical properties and characteristics. These tubes have a tensile strength between 360 to 460mpa. They have minimum yield strength of 235mpa and can be easily elongated by 25% and still possess excellent workability in the system. These tubes are seen in applications where high strength is not very important. DIN 2391 ST37 4 is a grade in this range that can be galvanized, black, or pre-painted to give it a smooth surface finish. The prices of this grade in India are cheaper than in the USA and other European nations due to the widespread availability of raw materials and labour. Apart from this, the strategic position of India helps in logistics and supply chain systems.

Piping components in the ST37 grade are generally designed in two configurations. ST37 Seamless Steel Pipe is the strongest and most expensive grade in this range. Designed by passing hot steel billets through an extruded metal they don’t possess any welds or seam. This gives it excellent load-bearing capacity. DIN 2448 ST 37 Erw Pipes is a cost-effective alternative to this grade that is produced by rolling metal and welding it back longitudinally. Contact us for more information.

 

Supplier of DIN 2391 ST37 Carbon Steel Seamless Pipes

comment image

Table of Contents


ST37 Pipe Supplier

DIN 17100 St 37 Welded Tube and DIN 2391 ST37 Pipes manufacturer in India

ST37 Tube Specification

Standard DIN 2391
Grade ST37
Size OD (4-190 milimeter) x WT (0.5-15 milimeter)
Outer Dimensions 4.0 – 60.0 milimeter
Wall Thickness 0.5 – 8 milimeter
Length maximum 6000 milimeter

ST37 Pipe Manufacturer in India, Suppliers Of ST37 Tube In Mumbai, One Stop Shop For All DIN 2391 ST 37 Erw Pipes.

Tolerance Of DIN 2448 ST 37 Erw Pipes

OD Tolerance 4-30milimeter 31-40milimeter 41-50milimeter 51-60milimeter 61-70milimeter 71-80milimeter 81-90milimeter 91-100milimeter
±0.08milimeter ±0.15milimeter ±0.20milimeter ±0.25milimeter ±0.30milimeter ±0.30milimeter ±0.40milimeter ±0.45milimeter
WT Tolerance

±10%

ST37 Pipe Supplier in India, We Maintain DIN 2391 4 Welded Pipes Good Quality, Check Availability Of DIN 1.0037 Seamless Steel Pipes, Get Free Quote Of ST37 Pipes.

Stockist of DIN 17100 ST 44-2/ St44-3U/ St 44-3N Tubes, Buy Carbon Steel DIN 2391 ST37 Pipe at lowest price in India

DIN 2391 ST37 4 Welded Pipes Price List

Description Per Unit (INR)
PIPES ST37 D4.0X 0,70WDX DIN 2391 4,029
SEAMLESS CARBON STEEL PIPES DIN 1.0037 DIN2391HEAT NO 571356 69
SEAMLESS CARBON STEEL PIPES ST37 DIN2391HEAT NO 579340 69
SEAMLESS CARBON STEEL PIPES 1.0037 DIN2391HEAT NO 561207 69

Inspection Testing Of ST37 Seamless Steel Pipes

  • Hydrostatic Testing
  • Pitting Corrosion Test
  • Ultrasonic Testing
  • Positive material recognition
  • Radiographic Test
Check DIN 17100 St 33/ St37-3U / RSt 37-2/ St 37-3 N Pipe and tubes in many sizes and thickness

ST37 Pipes Sizes

Designation of Diameter O/D Nominal Wall Thickness
DIA SCH.5S SCH.5 SCH 10S SCH.10 SCH.20S SCH.30 SCH.40S SCH.40 SCH 60
(A) (B) Meter
MM 		Wall
Thk 		Weight Kg/Mtr Wall
Thk 		Weight Kg/Mtr Wall
Thk 		Weight Kg/Mtr Wall
Thk 		Weight Kg/Mtr Wall
Thk 		Weight Kg/Mtr Wall
Thk 		Weight Kg/Mtr Wall
Thk 		Weight Kg/Mtr Wall
Thk 		Weight Kg/Mtr Wall
Thk 		Weight Kg/Mtr
6 1/8 10.3 1 0.23 1.2 0.27 1.5 0.33 1.73 0.37
8 1/4 13.7 1.2 0.37 1.65 0.49 2 0.58 2.24 0.64
10 3/8 17.2 1.2 0.47 1.65 0.63 2 0.74 2.31 0.87
15 1/2 21.3 1.65 0.01 1.65 0.81 2.11 1.02 2.11 1.02 2.5 1.15 2.77 1.29
20 3/4 26.7 1.65 1.03 1.65 1.03 2.11 1.3 2.11 1.3 2.5 1.49 2.87 1.71
25 1 33.4 1.65 1.31 1.65 1.31 2.77 2.13 2.77 2.13 3 2.24 3.38 2.54
32 11/4 24.2 1.65 1.67 1.65 1.67 2.77 2.73 2.77 2.73 3 2.9 3.56 3.44
40 11/2 48.3 1.65 1.93 1.65 1.93 2.77 3.16 2.77 3.16 3 3.35 3.68 4.11
50 2 60.3 1.65 1.93 1.65 2.42 2.77 3.99 2.77 3.99 3.5 4.9 3.91 5.52
65 21/2 73 2.11 3.75 2.11 3.75 3.05 5.34 3.05 5.34 3.5 6 5.16 8.77
80 3 88.9 2.11 4.59 2.11 4.59 3.05 6.56 3.05 6.56 4 8.37 5.49 11.47
90 31/2 101.6 2.11 5.25 2.11 5.25 3.05 7.53 3.05 7.53 4 9.62 5.74 13.78
100 4 114.3 2.11 5.93 2.11 5.93 3.05 8.5 3.05 8.5 4.5 12.18 6.02 6.32
125 5 141.3 2.77 9.61 2.77 9.61 3.4 11.74 3.43 11.74 5 16.8 6.55 2210
150 6 168.3 2.77 11.47 2.77 11.47 3.4 14.04 3.43 14.04 5.5 22.08 7.11 28.69
200 8 219.1 2.77 15 2.77 15 3.76 20.77 3.76 20.27 6.35 33.82 7.04 37.38 8.18 43.2 10.81 53.9
250 10 273.1 3.4 22.95 3.4 22.95 4.19 28.2 4.19 28.2 6.35 42.41 7.8 51.81 9.27 61.22 12.2 82.8
300 12 323.9 3.96 31.72 4.19 33.6 4.57 36.54 4.57 36.54 6.35 50.48 8.38 66.2 9.53 75.01 10.31 80.94 14.27 110.62
350 14 355.6 3.96 34.86 4.78 41.99 6.35 55.53 7.92 68.95 9.53 82.58 9.53 82.58 11.13 96 15.06 128.42
400 16 406.4 4.19 42.2 4.78 48.07 6.35 63.61 7.92 79.03 9.53 94.7 9.53 94.7 12.7 125.2 16.66 162.59
450 18 457.2 4.19 47.46 4.78 54.15 6.35 71.69 7.92 89.1 11.13 124.32 9.53 106.83 14.27 158.27 19.05 209
500 2C 508 4.78 60.23 5.54 69.7 6.35 79.76 9.53 118.93 12.7 157.51 9.53 118.9 15.06 185.89 2062 251.65
550 22 558.8 4.78 65.95 5.54 76.75 6.35 87.84 9.53 131.07 12.7 173.66 9.53 131.07 15.88 216.04 22.23 298.55
600 24 609.6 5.54 83.8 6.35 95.92 6.35 95.92 9.53 143.2 14.27 212.72 9.53 143.2 17.45 258.74 24.59 360.21
650 26 660.4 7.92 129.4 12.7 205.97 9.53 155.32
700 28 711.2 7.92 139.47 12.7 222.13 15.88 276.48 9.53 167.44
750 3C 762 6.35 120.15 7.92 149.55 7.92 149.55 12.7 238.28 15.88 296.68 9.53 179.56
800 32 812.8 7.92 159.62 12.7 254.44 15.88 316.88 9.53 191.69 17.48 348.11
850 34 863.6 7.92 169.64 12.7 270.5 15.88 336.96 9.53 203.74 17.48 370.22
900 36 914.4 7.92 179.77 12.7 286.75 15.88 357.28 9.53 215.93 19.05 427.09

Processing Of Steel Pipe ST37

  • Hot rolled
  • Forming Drilling/ Machining
  • Cold rolled
  • Grinding
  • Cutting
Wide stock of DIN 17100 St 37-3 / St 37-2 Tubes, check specification, weight and dimension of ST37 DIN 2391 Carbon Steel Welded Pipes & Tubes

ST37 Steel Pipe Types

ST37 Tube

ST37 Tube

DIN 2448 ST 37 Erw Pipes

DIN 2391 ST 37 Erw Pipes

ST37 Pipe

ST37 Pipe

DIN 2391 ST37 4 Welded Pipes

DIN 2391 ST37 4 Welded Pipes

ST37 Seamless Steel Pipes

ST37 Seamless Steel Pipes

ST37 Pipes

ST37 Pipes

Steel Pipe ST37

Steel Pipe ST37

Carbon Steel DIN 2391 ST 37 Pipes

Carbon Steel DIN 2391 ST 37 Pipes

ST37 Steel Pipes

ST37 Steel Pipes

ST 37 Steel Grade Seamless Pipes

ST 37 Steel Grade Seamless Pipes

DIN 2391 ST37 Carbon Steel Pipes

DIN 2391 ST37 Carbon Steel Pipes

DIN 2391 ST37 Welded Pipes

DIN 2391 ST37 Welded Pipes

DIN 2391 ST37 Rectangular Pipes

DIN 2391 ST37 Rectangular Pipes

Carbon Steel DIN 2391 ST 37 Pipes Yield Strength

  • Hardness : ≤ 120 hardness brinell from
  • Impact value: ≥ 2temperature 20 ° C

Check Steel Pipe ST37 Chemical Composition And Carbon Steel DIN 2391 ST 37 Pipes Dimensions In Inch.

Stockholder, Trader, Importers of DIN 17100 St 52-3 U/ 52-3 N smls Pipes in mumbai, check DIN 2391 37 Rectangular/ Square Pipes Mechanical and Chemical Compositions

Chemical Composition Of ST 37 Steel Grade Seamless Pipes

Standard Grade C Si Mn P maximum S maximum
DIN2391 St37 ≤0.17 ≤0.35 ≥0.35 0.04 0.04

ST37 Steel Seamless Pipes Manufacturer In India.

ST37 Pipe Mechanical Properties

Cold drawn(Mandatory) Cold drawn(Soft) Cold Drawn and Stress Release Anneal Normalizing
BK1） BKW1） (BKS) (GBK)1） (NBK)1）

Grade

Tensile Elongation Tensile Elongation Tensile Yield point Elongation Tensile Elongation Tensile Yield point Elongation
N/milimeter2 % N/milimeter2 % N/milimeter2 N/milimeter2 % N/milimeter2 % N/milimeter2 N/milimeter2 %
St37 480 6 420 10 420 315 14 315 25 350~480 235 25

ST37.4 Annealed Tube Manufacturing Processing

  • Forming Drilling/ Machining
  • Grinding
  • Hot rolled
  • Cold rolled
  • Cutting

Application of ST37 Steel Pipe

  • Engineering
  • Bridge Structures
  • Petrochemical
  • Marine Structures
  • Construction
  • Oil and Gas

ST37 Pipes Stockist

Carbon Steel DIN 1.0037 Seamless Pipes DIN 1.0037 Hot Rolled Steel Seamless Pipes
Carbon Steel DIN 1.0037 Pipes DIN 1.0037 Mild Steel Pipes
DIN 1626 Tube DIN 1.0037 Seamless Tube
DIN 1.0037 Steel Pipes DIN 2395-2 St37.2 Pipes
DIN 2391 St37.2 Pipes Werkstoff-Nr. 1.0037 Seamless Pipes
DIN 1.0037 Seamless Steel Pipes DIN 1.0037 Seamless Rectangular Hollow Section Pipes
DIN 1.0037 Seamless Round Pipes DIN 1.0037 Seamless Square Hollow Section Pipes

Documentation Of DIN 2448 ST 37 Welded Pipes

  • Quality Assurance Plan (QAP)
  • WPS/PQR, Welding Procedure Qualification Record,
  • as per EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
  • Material Traceability Records
  • NABL approved Laboratory Test Reports
  • Form A for the purposes of the Generalized System of Preferences (GSP)
  • Guarantee Letter
  • Test Reports of Raw Material
  • Commercial Invoice which includes HS Code
  • Fumigation Certificates
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0175/ MR0103

Get the Local reference about material quality in your place of Living

Santos South Australia, Adelaide

Santos South Australia, Adelaide

ST37 Tube

BHP Group Australia, Victoria, Melbourne

BHP Group Australia, Victoria, Melbourne

DIN 2448 ST 37 Erw Pipe

Wesfarmers Western Australia, Perth

Wesfarmers Western Australia, Perth

ST37 Pipe