Carbon Steel Pipe Manufacturer In India

Carbon Steel Pipe Manufacturer In India

What is carbon steel pipe?

Carbon steel piping components are designed with a superior content of carbon spanning between 0.5 to 2.1 percent in weight. A Carbon Steel Pipe is constituted with different alloys that give it good corrosion and oxidation resistance properties in the systems. PTFE Lined carbon steel pipe showcases a low melting point and has outstanding durability in severe applications. They can operate in high pressures and temperatures up to 230 degrees C. FBE Lined carbon steel pipe are made up of two substrates that protect them against corrosive media over long periods of time. The versatile galvanized carbon steel pipe is produced by dipping the module in zinc, thereby improving the resistance and tolerance of the pipe grade.

Difference between Carbon Steel Welded Pipe and Carbon Steel Seamless Pipe

Piping components in a carbon steel grade are produced in seamless and welded configurations. Both these types can be distinguished from certain characteristics.

  • Carbon Steel Seamless Pipe is produced by passing precisely shaped hot billets through an extruded metal. A welded pipe is produced by welding pieces of sheets or strips.
  • A seamless pipe has a 20% higher load-bearing capacity and strength compared to a Carbon Steel Welded Pipe.
  • Welded pipes can be produced in a range of sizes and dimensions. Seamless pipes are restricted to up to 24 inches.
  • Seamless Carbon Steel Tube has thicker and stronger walls. Welded tubes have thinner and lighter walls.
  • The welds or seams on Carbon Steel ERW Pipe are prone to rust; however, seamless pipes have good resistance to corrosive media.
  • Welded carbon pipes are cheaper than carbon seamless pipe grades.

Difference between High/ Low/ Medium/ Fully Killed/ Normalized/ Plain and Quenching carbon steel pipe

The content of carbon in steel helps in categorizing these components. A Low Carbon Steel Pipe is designed with a carbon content of less than 0.30%. A medium carbon grade is made up of a carbon content between 0.30% to 0.60%, while a high carbon grade has over 0.60% of carbon embedded in them. The higher the carbon content higher is its strength, but the ductility is lower. A fully killed Large Diameter Carbon Steel Pipe is thoroughly deoxidized by the removal of oxygen during the process of melting. The steel has dissolved oxygen after it is converted to solid iron. A normalized carbon steel pipe is obtained by heating it to reach the austenite phase followed by cooling. These pipes exhibit superior strength and ductility compared to annealed steel. In a quenched carbon pipe the crystal structure of the module is changed, making them harder or brittle. A plain pipe in this grade is the original grade and has not been processed further.

Why buy from Carbon Steel Pipe manufacturers in India?

Manufacturers and suppliers of carbon steel pipes in India have access to abundant raw materials and labour. This reduces the rate of the SCH 40 Carbon Steel Pipe. The factories and centers in India are equipped with the best facilities and technological systems, further ensuring quality products. The strategic location of India helps in better transportation and providing enhanced logistical support for High Yield Carbon Steel Pipe.

Difference between SAW Carbon Steel pipes and Carbon Steel ERW pipes?

  • The welding seam of a carbon steel ERW pipe is flat and smooth. SAW carbon steel pipe is utilized for internal or external weld reinforcement.
  • The solvent deposits on SAW pipes result in large volumes of defects. ERW pipes show few defects as the pipes are wire lined or straight welded.
  • ERW carbon pipes residual stress ratio is lower or less than SAW pipes.
  • When the grade becomes defective, the ERW pipe can be re-welded. Any processing on a defective SAW pipe will lead to corrosion or cracking.

 

CS ERW Pipe and Carbon Steel Seamless Pipe supplier in Mumbai

comment image

Table of Contents


Carbon Steel Pipes

Galvanized Carbon Steel Tube supplier in Mumbai, ready stock of Jindal and ISMT Large Diameter Black ERW Pipes for Petrochemical, nuclear station pipelines, Oil & Gas, Petroleum, Chemical and other large projects

Carbon Steel Pipe Specification

Available MaterialsST35.8, Q235 X42 St37.2, St35.4/8, STPT49 G42, STS42, STP STB42, St52.4STP to A53B, X80, G38, A106B, ST37.0, 5L B, API St45, STPT42, St42, St52, material supplier in India
Common StandardASTM A53, A106, API 5L, ASME B36.10 DIN1626, DIN1629, DIN17175, JIS G3454, JIS G3456, JIS G3461, EN10216-1, EN 10208
Standard Size1/2 Inch Nominal Bore to 36 Inch Nominal Bore (LSAW, SSAW, HSAW) / (DN15 to DN900)
DimensionsASME/ ANSI B36.10 / 19
Codes and Standards

ASME, ANSI, ASTM, SAE, API, BS, AWWA,AGA, ISO, DIN

Supplier of Carbon Steel Pipes offer various shapesRound, Oval, Triangle, Semi-Round, Semi-oval, Rhomboid, Square, Rectangle, Hollow, Elliptical, Hollow, Semi-Rhomboid,
Producing techniquesSeamless / ERW / Welded / Fabricated / CDW / EFW
Wall Thk3-12m milimeter
Pipes schedulesSCH 80S, SCH 5, SCH 40, SCH10, SCH 80, SCH XXS, SCH 160, SCH XS Supplier
Available ShapesHalf Round, Round, Rectangular Square or Custom shape CS Pipes supplier and manufacturer
Marking
  • Nominal Pipes Sizes
  • Specification
  • Manufacturing Method (Welded / Seamless)
  • Grade
  • Pipes Schedule or Wall Thickness
  • Supplier / Manufacturer’s Name or Custom Logo - on request
  • Heat Number
Pipes EndBeveled End, Plain End, Treaded
Length3 to Maximum 18 M or custom Size
Surface FinisheBlack painting, Epoxy, FBE, Varnish, 3PE, etc.
Test Certificates provided by suppliersEN 10204 3.1 B
Material Test Certificate (MTC) provided by Carbon Steel Pipe Supplier

ISO 14001:2015, PED, ISO 9001:2005, Ultrasonic Testing (UT), NDE, EIL, Radiographic Testing (RT), IBR,

Carbon Steel Pipe Manufacturers in India, Suppliers Of black carbon steel pipe In Mumbai, One Stop Shop For All high yield carbon steel pipe.

Types Of Carbon Steel Pipe

Carbon Steel Pipe

Carbon Steel Pipe

Carbon Steel Tube

Carbon Steel Tube

Carbon Steel Seamless Pipe

Carbon Steel Seamless Pipe

Carbon Steel Erw Pipe

Carbon Steel Erw Pipe

Carbon Steel Welded Pipe

Carbon Steel Welded Pipe

Sch 40 Carbon Steel Pipe

Sch 40 Carbon Steel Pipe

Black Carbon Steel Pipe

Black Carbon Steel Pipe

High Yield Carbon Steel Pipe

High Yield Carbon Steel Pipe

Fbe Lined Carbon Steel Pipe

Fbe Lined Carbon Steel Pipe

Ptfe Lined Carbon Steel Pipe

Ptfe Lined Carbon Steel Pipe

Carbon Seamless Steel Pipe

Carbon Seamless Steel Pipe

Galvanized Carbon Steel Pipe

Galvanized Carbon Steel Pipe

Low Carbon Steel Pipe

Low Carbon Steel Pipe

Large Diameter Carbon Steel Pipe

Large Diameter Carbon Steel Pipe

Coated Carbon Steel Pipe

Coated Carbon Steel Pipe

Cs Seamless Pipe

Cs Seamless Pipe

Epoxy Lined Carbon Steel Pipe

Epoxy Lined Carbon Steel Pipe

Epoxy Coated Carbon Steel Pipe

Epoxy Coated Carbon Steel Pipe

Carbon Steel Square Pipe

Carbon Steel Square Pipe

Carbon Steel Rectangular Tubing

Carbon Steel Rectangular Tubing

Carbon Steel Boiler Tubes

Carbon Steel Boiler Tubes

Carbon Steel Casing Pipe

Carbon Steel Casing Pipe

Nsf 61 Carbon Steel Pipe

Nsf 61 Carbon Steel Pipe

Carbon Steel Seamless Pipes

Carbon Steel Seamless Pipes

Schedule 80 Carbon Steel Pipes

Schedule 80 Carbon Steel Pipes

CS Pipe

CS Pipe

Carbon Steel ASTM A335 Pipes

Carbon Steel ASTM A335 Pipes

Carbon Steel Pipes

Carbon Steel Pipes

Carbon Pipes

Carbon Pipes

Carbon Steel Fabricated Pipes

Carbon Steel Fabricated Pipes

Carbon Steel Welded Pipes

Carbon Steel Welded Pipes

Carbon Steel Erw Pipes

Carbon Steel Erw Pipes

Carbon Steel Lsaw Pipes

Carbon Steel Lsaw Pipes

Different Grades Of Carbon Steel Seamless Pipes

ASTM A53 Grade B Pipes

ASTM A53 Grade B Pipes

ASTM A106 Grade B Pipes

ASTM A106 Grade B Pipes

ASTM A333 Grade 6 Pipes

ASTM A333 Grade 6 Pipes

ASTM A252 pipes

ASTM A252 Pipes

ASTM A572 Gr 50 Pipes

ASTM A572 Gr 50 Pipes

ASTM A500 Grade B pipes

ASTM A500 Grade B Pipes

ASTM A672 Pipes

ASTM A672 Pipes

ASTM A671 Pipes

ASTM A671 Pipes

Killed CS Pipe Grades

Rimmed Steel

Rimmed Steel

Rimmed steel is a low-carbon steel. This steel contains an amount of iron oxide such that continuous generation of carbon monoxide during solidification is not inhibited. Rimmed steel is virtually free from voids, and is easily bendable and cleanable. Most rimmed steels contain less than 0.1% carbon.
Semi- Killed

Semi- Killed

Semi-Killed Carbon Steel is Partially deoxidized and some free Oxygen is still left in the steel. Properties of semi-killed steel in between fully killed and rimmed steel. Steels produced without deoxidization is known as rimmed steel. Which is brittle and has poor elongation.
Fully-Killed

Fully-Killed

Killed Carbon Steels is completely deoxidized steel, no free Oxygen is left in the steel. Resulting in uniform composition and superior toughness as compared to other types. Semi-Killed Carbon Steels is Partially deoxidized and some free Oxygen is still left in the steel.

ADW / AD 2000/ Nace Mr0175 and IBR certified manufacturer of ASTM A524 Low CS tube in India, check SCH 40 Carbon Steel Pipe price per meter or cost per foot in India

Carbon Steel Pipe Price Per Meter

DescriptionPrice in UkPrice in India
CS WELDED PIPES 6mtr x 18mm (Per Meter)£31.083137.86
PIPES CS SEAMLESS 6mtr x 22mm (Per Meter)£41.464185.83
CS NACE SEAMLESS PIPES 6mtr x 54mm (Per Meter)£133.7413502.48
CS ERW PIPES 6mtr x 108mm (Per Meter)£390.1239386.77
Thick Wall Erw Pipes£4.78400
CS Large Diameter Pipes£3.05255

CS Pipe Price Per Foot

DescriptionPrice in India
CARBON PIPES 2.2M33
CARBON STEEL PIPES 2.7M40
CARBON SEAMLESS PIPES 2.2M13502.48

Get instant delivery Of 2 Inch Carbon Steel Tube, Weight Chart Of Carbon Steel Seamless Pipe, Carbon Steel Erw Pipe Suppliers In Mumbai. India.

Carbon Steel Seamless Pipe Weight Chart

Nominal sizes (NPS)Outside DiaSeamless & Welded Carbon Pipes to ASME B36.10M
dimensions are in milimeter
Pipes Schedules
DNNPSmilimterS10S20S30S40StdS60S80XSS100S120S140S160XXS

6

1/8

10.3

1.24

1.45

1.73

1.73

2.41

2.41

8

1/4

13.7

1.65

1.85

2.24

2.24

3.02

3.02

10

3/8

17.1

1.65

1.85

2.31

2.31

3.20

3.20

15

1/2

21.3

2.11

2.41

2.77

2.77

3.73

3.73

4.78

7.47

20

3/4

26.7

2.11

2.41

2.87

2.87

3.91

5.56

7.82

25

1

33.4

2.77

2.90

3.38

3.38

4.55

4.55

6.35

9.09

32

11/4

42.2

2.77

2.97

3.56

3.56

4.85

4.85

6.35

9.70

40

11/2

48.3

2.77

3.18

3.68

3.68

5.08

5.08

7.14

10.15

50

2

60.3

2.77

3.18

3.91

3.91

5.54

5.54

8.74

11.07

65

21/2

73.0

3.05

4.78

5.16

5.16

7.01

7.01

9.53

14.02

80

3

88.9

3.05

4.78

5.49

5.49

7.62

7.62

11.13

15.24

90

31/2

101.6

3.05

4.78

5.74

5.74

8.08

8.08

100

4

114.3

3.05

4.78

6.02

6.02

8.56

8.56

11.13

13.49

17.12

125

5

141.3

3.40

6.55

6.55

9.53

9.53

12.70

15.88

19.05

150

6

168.3

3.40

7.11

7.11

10.97

10.97

14.27

18.26

21.95

200

8

219.1

3.76

6.35

7.04

8.18

8.18

10.31

12.70

12.70

15.09

18.26

20.62

23.01

22.23

250

10

273.0

4.19

6.35

7.80

9.27

9.27

12.70

15.09

12.70

18.26

21.44

25.40

28.58

25.40

300

12

323.8

4.57

6.35

8.38

10.31

9.53

14.27

17.48

12.70

21.44

25.40

28.58

33.32

25.40

350

14

355.6

6.35

7.92

9.53

11.13

9.53

15.09

19.05

12.70

23.83

27.79

31.75

35.71

400

16

406.4

6.35

7.92

9.53

12.70

9.53

16.66

21.44

12.70

26.19

30.96

36.53

40.49

450

18

457

6.35

7.92

11.13

14.27

9.53

19.05

23.83

12.70

29.36

34.93

39.67

45.24

500

20

508

6.35

9.53

12.70

15.09

9.53

20.62

26.19

12.70

32.54

38.10

44.45

50.01

550

22

559

6.35

9.53

12.70

9.53

22.23

28.58

12.70

34.93

41.28

47.63

53.98

600

24

610

6.35

9.53

14.27

17.48

9.53

24.61

30.96

12.70

38.89

46.02

52.37

59.54

650

26

660

7.92

12.70

9.53

12.70

700

28

711

7.92

12.70

15.88

9.53

12.70

750

30

762

7.92

12.70

15.88

9.53

12.70

800

32

813

7.92

12.70

15.88

17.48

9.53

12.70

850

34

864

7.92

12.70

15.88

17.48

9.53

12.70

900

36

914

7.92

12.70

15.88

19.05

9.53

12.70

950

38

965

9.53

12.70

1000

40

1016

9.53

12.70

1050

42

1067

9.53

12.70

1100

44

1118

9.53

12.70

1150

46

1168

9.53

12.70

1200

48

1219

9.53

12.70
Europe and Japan standard galvanized Carbon Steel Welded Pipe in stock, SCH 40 CS Seamless Pipe custom length cutting at ZERO COST

Manufacturing Process Of Carbon Steel Welded Pipe

Manufacturing Process Of Carbon Steel Welded Pipe

Wall thickness of CS ERW Pipe

Schedule 40 CS ERW Pipes

Schedule 40 CS ERW Pipes

Schedule 10 Carbon Steel Pipes

Schedule 10 Carbon Steel Pipes

Schedule 10 Wall thickness of CS ERW Pipes

Schedule 10 Wall thickness of CS ERW Pipes

Schedule 80 Carbon Steel ERW Pipes

Schedule 80 Carbon Steel ERW Pipes

Sch 20 CS ERW Pipes

Sch 20 CS ERW Pipes

Sch 60 Wall thickness of CS ERW Pipes

Sch 60 Wall thickness of CS ERW Pipes

Types Of Carbon Steel Boiler Tubes

A178/A178M-02 Standard Specification for Electric-Resistance-Welded CS and Carbon-Manganese Steels Boiler and Superheater Tubes
A179/A179M-90a(2001) Standard Specification for Seamless Cold-Drawn Low-CS Heat-Exchanger and Condenser Tubes
A192/A192M-02 Standard Specification for Seamless CS Boiler Tubes for High-Pressure Service
A210/A210M-02 Standard Specification for Seamless Medium-CS Boiler and Superheater Tubes
A214/A214M-96(2001) Standard Specification for Electric-Resistance-Welded CS Heat-Exchanger and Condenser Tubes
BS 3059-1:1987 Welded Steels boiler and superheater tubes 1

BS 3606 : 1992
Steels tubes for heat exchangers
DIN 2448/17175, in material St35.8/10CrMo910/ 15NiCuMoNb5 (WB36)/ 13CrMo44/X20CrMoV121Seamless boiler tubes

 

Carbon Steel Boiler Tubes Grades

Carbon Steel Boiler Tube

Carbon Steel Boiler Tube

Carbon Steel Tubes For Heat Exchangers

Carbon Steel Tubes For Heat Exchangers

Carbon Steel Finned Tube

Carbon Steel Finned Tube

Carbon Steel Condenser Tube

Carbon Steel Condenser Tube

Carbon Steel Heat Exchanger Tubes

Carbon Steel Heat Exchanger Tubes

Cold-drawn Seamless U Tube

Cold-drawn Seamless U Tube

Carbon Steel U Tube

Carbon Steel U Tube

High Tensile Steel Superheater Tubes

High Tensile Steel Superheater Tubes

Ultra High CS Seamless U Tube

Ultra High CS Seamless U Tube

Medium CS Seamless Boiler Tubes

Medium CS Seamless Boiler Tubes

Cold Drawn Boiler Tube

Cold Drawn Boiler Tube

Evaporator Coils

Evaporator Coils

CS Condenser Coil

CS Condenser Coil

Carbon Boiler Fin Tube

Carbon Boiler Fin Tube

High Yield Carbon Steel Honed Tubing

High Yield Carbon Steel Honed Tubing

Nace Mr0175 CS Hot Finished Tube

Nace Mr0175 CS Hot Finished Tube

Water Tube Boiler Tubes

Water Tube Boiler Tubes

Fire Tube Boiler Tubes

Fire Tube Boiler Tubes

Carbon Steel Coated Pipe

FBE Coated Pipes
Products:Epoxy Coated CS Pipe, FBE (Fusion Bond Epoxy) Coated Pipe,
Standard:CAN/CSA-Z245.21, DIN30670
Uses: heat and power plant, Used for Coal mine,oil and gas transmission
Sizes in MM:OD:219-2000 Milimeter
ColorRAL colors coating powder
Pakcing:in loose, in bundles, Nylon Strip for each bundle for piece pipe
Service:water resistance strong and anti-chemical corrosion

 

3PE Coated Pipes
Application: Used for heat and power plant,Coal mine,oil and gas transmission
Coating Layer:Layer 2 Adhesive :170-250um
Layer 1 Epoxy Powder ≥80um
Layer 3 Polyethylene : 1.8-3.7mm
Product:3PE Coating Pipes, 3PE Anticorrosive Pipes
Standard:DIN30670, NFA 49-710, CAN/CSA-Z245.21, ISO DIS21809-1
Sizes:DN50 to DN2200
Packing:in loose,in bundles, Nylon Strip for each bundle for piece pipe

 

Concrete Coated Pipes
Application: Used for petroleum, natural gas, sewage & water, and Pipes systems
Type:Concrete Weight Coating, Concrete Coated Pipes
Coating Standard:DIN 30671, DIN 30670, SY/T0413-2002, DIN 30678, etc.
Specification: OD: 219milimeter~2020milimeter
WT: 5milimeter~25milimeter
LENGTH: 4meter, 6meter, 12meter, 18meter, 21meter
Pipes Type: Electric Resistance Welded, Submerged Arc Welded (SSAW/LSAw)
Coating Thickness: Three Layer Polyethylene Coating (2 milimeter~4.5milimeter)
End:Bevelled End/Plain End, Burr Removed
Packing: Steels Strips bundled,Waterproof Paper wrapped, two tags on each bundle

 

3LPE Coated Pipe

3LPE Coated Pipe

Cement Lined Steel Pipe

Cement Lined Steel Pipe

Epoxy Coated Steel Pipe

Epoxy Coated Steel Pipe

PE Coated Pipe

PE Coated Pipe

Powder Coated Pipe

Powder Coated Pipe

PTFE Lined Pipe

PTFE Lined Pipe

High Yield Carbon Steel Pipe

Low Carbon Steel Pipe Grades

Low Carbon Steel Pipe Grades

 

Low Carbon SteelStandards
Low Carbon-Manganese Steel 150M19
S235
S275
S355
LF2
ST52-3
GradeUNS Designation number
1010G10100
1018G10180
1020G10200
1022G10220

Prestige quality Carbon Steel Pipe Supplier in India offer in EN, DIN, ISO, BS, JIS or ANSI standard.

DIN Standard of CS Seamless Pipe

StandardTypesGrade
DIN 2393Seamless Pipes for Structural PurposeRSt34-2, RSt37-2, RSt44-2, St52
DIN 1629 / DIN 2391Seamless TubesSt37.0, St44.0, St52.0, St52.3
DIN 17175Seamless Tubes for Elevated TemperatureSt35.8, St45.8, 10CrMo910, 15Mo3, 13CrMo44, STPL340, STB410, STB510, WB36
DIN 2440Seamless TubesSt33.2

JIS Standard Of CS Pipes

Standards/codeAvailable specifications (nominal diameter)Manufacturing
method (raw pipes)
JIS G 3452
SGP 		15A～100A
15A～500A 		Forge welded
ERW (including hot finishing)

Advantages And Disadvantages Of Carbon Steel Spiral Welded Pipes

Advantages
  • First, spiral welded pipes have higher strength than straight welded pipes.
  • Second, according to the tests of relevant research institutions in the United States, although the spiral welded pipes and the straight welded pipes (ERW steel pipes) are at the same level, the spiral welded pipes has high impact toughness.
  • Third, the spiral pipes tube has high fatigue strength as well as the seamless steel tube’s and the electric resistance welded steel tube’s.
  • Fourth, the dimensions are accurate, the diameter tolerance is less than 0.12%, the deflection is less than 1/2000, and the ellipse is less than 1%.
  • Fifth, under the same pressure conditions, the stress of the spiral weld is lower than that of the straight weld, which is 75% to 90% of the stress of the straight seam welded pipe, and can withstand higher pressure.

Disadvantages

It is a certain crescent bend, and the welding point is in the elastic strip edge area, so it is difficult to align the welding torch and affect the welding quality.

Carbon Steel Tube Grades

Lgpipe is an ISO certified Carbon Steel Welded Pipe Supplier in India & SCH 40 Carbon Steel Pipes distributor in Mumbai

Carbon Steel Galvanized Pipe

Galvanized steel will eventually start to corrode and can pose a hazard for drinking water, which makes it unsafe for drinking water in the long run. The problem isn't the zinc coating but lead and cadmium, two heavy metals that can exist in the zinc because of the galvanizing process.

Lgpipe is an ISO certified FBE Lined carbon steel pipe Suppliers in India & PTFE Lined carbon steel pipes Stockist in Mumbai.

PTFE Lined Carbon Steel Pipe

ProductsPTFE lined pipes, PFA lined piping, PTFE fitting, Polytetrafluoroethylene Lined Pipe, PTFE dip pipe, PTFE / PFA seamless linings
Size1" to 12" (DN20 to DN1050mm.)
Max length3000 mm
End ConnectionsOne Side Flange Fixed and Other Side Flange Loose, Both Side Flange Fix.
Standard SpecificationsPipes
  • ASTM A-106 Gr. B, Sch. 40 CS Seamless Pipes
  • ASTM A312 TP 304 / 316 : SCH.-40 Stainless Steel Seamless Pipes
  • Jacketed Spool Pipes

Pipes Flanges and Collars

  • Base material IS 2062 Plates
  • ASTM A105
  • CF8 (SS304)
  • CF8M (SS316)

Dimensions: BS 10, ASME 150 / 300, Mixed, DIN PN10/16

LiningPTFE Liner
Other available LiningPTFE, PFA, FEP, ETFE, PVDF, PP, HDPE
Coating ThicknessMin 3.5 mm - 6.0 (±1.0 Lining Tolerance)

 


Carbon Steel Tube Sizes

OD*,
mm 		WT*,
mm 		ID*, mm (nominal)ISO
thread 		Kg/m
13.52.358.81/4 in.0.66
17.22.3512.53/8 in.0.87
21.31.618.11/2 in.0.79
21.32.6516.01/2 in.1.24
26.91.623.73/4 in.1.01
26.92.022.93/4 in.1.24
26.92.6521.63/4 in.1.61
26.93.220.53/4 in.1.90
30.02.026.01.40
33.72.029.71.59
33.72.628.52.03
33.73.2527.22.48
33.74.0525.63.01
38.02.632.82.31
42.42.038.41¼ in.2.01
42.43.2535.91¼ in.3.19
44.52.040.52.13
44.52.938.73.02
48.32.044.31½ in.2.32
48.32.643.11½ in.2.98
48.33.2541.81½ in.3.67
50.05.040.05.61
51.02.645.83.15
54.02.050.02.60
57.02.951.23.93
60.32.056.32 in.2.92
60.32.655.12 in.3.76
60.32.954.52 in.4.17
60.33.6553.02 in.5.18
63.52.658.33.97
70.02.964.24.87
76.12.072.13.71
76.12.970.35.32
88.93.681.73 in.7.69
88.94.0580.83 in.8.61
101.63.694.48.83
108.04.0100.010.42
114.33.6107.14 in.9.95
114.34.5105.34 in.12.37
121.04.0113.011.72
133.04.0125.012.92
159.04.5150.017.41

Allowable Stress For Carbon Steel Pipe

Allowable Stress For Carbon Steel Pipe
  • 1 psi (lb/in2)=6895 Pa (N/m2)
  • 1000 psi=6.9 MPa
  • T(oC)=5/9[T(oF) - 32]

Example - Allowable Stress - 2000 psi vs. MPa

(20000 psi) (6895 Pa/psi)=137900000 Pa

=138MPa

Carbon Steel Tubing Pressure Ratings

Carbon Steel Tubing Pressure Ratings

Absolute Roughness Of Carbon Steel Seamless Pipes

MaterialRoughness (mm)
CS (New)0.02-0.05
CS (Slightly Corroded)0.05-0.15
CS (Moderately Corroded)0.15-1
CS (Badly Corroded)1-3
CS (Cement-lined)1.5

Carbon Steel Structural Hollow Sections

  • High Tensile Steel Circular Hollow Sections- (Chs)
  • Medium Cs Rectangular Hollow Sections- (Rhs)
  • High Yield CS Square Hollow Sections-(Shs)

Modulus Of Elasticity Of CS Pipes

MECHANICAL PROPERTIESMETRICENGLISH
Modulus of Elasticity200 GPa29000 ksi

Value Added Services at Lg Pipes and Tubes

  • Heat treatment
  • Normalising
  • Quench and temper
  • Annealing
  • Stress relieve
  • Solution anneal and aging
  • Sub-critical annealing / process annealing / spheroidising
  • Product design for application
  • Production improvements through material development
  • Destructive testing
  • Non-destructive testing

CS Pipe Melting Point

Melting Point1425-1540°C (2597-2800°F)

Carbon Steel Seamless Pipe Stress Values

Allowable stress (S) of 16,000 psi be used for a temperature range of -20°F to +100°F.

Acid Pickling Of CS Seamless Pipe

Acid Pickling and passivation are two forms of chemical metal finishing that provide protective properties to metal especially against rust. Actually,pickling and passivation refers metal submerged in a bathing liquid that removes imperfections and rust from the surface of carbon steel.

Burst Pressure of CS Pipes

Pipes Dimension
(inches) 		Bursting Pressure
(psi)
1/210380
3/48610
18090
1 1/46745
1 1/26100
25185
2 1/25650
34940
3 1/25610
45270
54630
64220
73940
83720
93540
103380
122930

Pickling Procedure For CS Pipe

Pickling Procedure For CS Pipe

 

carbon steel pickling job will consist of pre-cleaning, pickling and oiling. The pre-cleaning step is usually done with degreasers or hot caustic solutions. Pickling solutions normally consist of sulphuric and water. The final step in most pickling jobs is the application of a rust inhibitor.

carbon pipe pickling method
  • Tank pickling
  • Pipe pickling.

ISO Approved carbon seamless steel pipe Supplier In India. Also Check galvanized carbon steel pipe Mechanical Properties

Carbon Steel Pipe Mechanical Properties

Grade AGrade BGrade C
Tensile strength, min, psi (MPa)48,000 (330)60000 (415)70,000 (485)
Yield strength, min, psi (MPa)30,000 (205)35,000 (240)40,000 (275)
Manufacturer of Heavy wall thickness and large diameter Carbon Steel Erw Pipes in India, ask for a Free quote, supplier of Epoxy/ PTFE/ FBE Lined Pipe coating in desired thickness

CS Pipe Thickness Chart

NPS
(Inches) 		Outside Dia
(Inches)
 Schedules
Schedule 10 Schedule 20 Schedule 30 Schedule STD Schedule 40 Schedule 60 Schedule XS Schedule 80 Schedule 100 Schedule 120 Schedule 140 Schedule 160 Schedule XXS
Wall Thk(Inch)
1/80.4050.0680.0680.0950.095
1/40.5400.0880.0880.1190.119
3/80.6750.0910.0910.1260.126
1/20.8400.1090.1090.1470.1470.1870.294
3/41.0500.1130.1130.1540.1540.2190.308
11.3150.1330.1330.1790.1790.2500.358
1 1/41.6600.1400.1400.1910.1910.2500.382
1 1/21.9000.1450.1450.2000.2000.2810.400
22.3750.1540.1540.2180.2180.3440.436
2 1/22.8750.2030.2030.2760.2760.3750.552
33.5000.2160.2160.3000.3000.4380.600
3 1/24.0000.2260.2260.3180.318
44.5000.2370.2370.3370.3370.4380.5310.674
55.5630.2580.2580.3750.3750.5000.6250.750
66.6250.2800.2800.4320.4320.5620.7190.864
88.6250.2500.2770.3220.3220.4060.5000.5000.5940.7190.8120.9060.875
1010.7500.2500.3070.3650.3650.5000.5000.5940.7190.8441.0001.1251.000
1212.7500.2500.3300.3750.4060.5620.5000.6880.8441.0001.1251.3121.000
1414.0000.2500.3120.3750.3750.4380.5940.5000.7500.9381.0941.2501.406
1616.0000.2500.3120.3750.3750.5000.6560.5000.8441.0311.2191.4381.594
1818.0000.2500.3120.4380.3750.5620.7500.5000.9381.1561.3751.5621.781
2020.0000.2500.3750.5000.3750.5940.8120.5001.0311.2811.5001.7501.969
2222.0000.2500.3750.5000.3750.8750.5001.1251.3751.6251.8752.125
2424.0000.2500.3750.5620.3750.6880.9690.5001.2191.5311.8122.0622.344
3030.0000.3120.5000.6250.3750.500
3232.0000.3120.5000.6250.3750.688
3434.0000.3120.5000.6250.3750.688
3636.0000.3120.5000.6250.3750.750
4242.0000.5000.6250.3750.750

Schedule 40 Black Carbon Steel Pipe

The Schedule 40 Black Carbon Steel Pipes is a medium range pressure capacity pipes with diameters ranging up to 24 inches and the wall thicknesses ranging up to 46mm.

Don't forget to compare our price with other carbon steel pipe manufacturers in India, check High/ Low/ Medium/ Fully Killed/ Normalized/ Plain/ Quenching CS grades, specification and chemical composition

Allowable Working Pressure For Carbon Steel Seamless Pipes

Allowable Working Pressure For Carbon Steel Seamless Pipes

CS Pipe Packaging

 

  • Wooden boxes/ crates/ pallets
  • Big rolls with spools
  • Bundles with plastic wrapping
  • Industrial packing techniques

CS Pipe Packaging

Pressure Rating For Carbon Steel Schedule 160 Pipes

Nominal pipes Size in InchOutside Diameter in MMSchedule 160
3/80.675
17.1
1/40.54
13.7
1/20.84
21.3
11.315
33.4
3/41.05
26.7
1 1/41.66
42.2
22.375
60.3
1 1/21.9
48.3
2 1/22.875
73
3 1/24
102
33.5
88.9
44.5
114
66.625
168
55.563
141
88.625
219 		1420
9791
1212.75
324 		961
6626
1010.75
273 		1140
7860
1414
356 		1092
7529
1818
457 		849
5854
1616
406 		956
6592
2020
508 		919
6337
2424
610 		766
5282
2222
559 		835
5757
3030
762 		817
5633
3434
864 		721
4971
3232
813 		766
5282
4242
1067 		583
4020
3636
914 		681
4695

CS Seamless Pipe Testing

 

  • Firmness test
  • Chemical examination-Spectro analysis
  • Mechanical examining like Elongation, tensile
    and reduction of area.
  • Hydrostatic analysis
  • Impact analysis
  • Positive material recognition

CS Seamless Pipe Testing

Manufacturer of JIS G 3445 Grade STKM 11A low carbon steel boiler tubes, check CS heat exchanger tubing dimensions and weight according to ASME B36.19

Welding Procedure Specification For Carbon Steel Pipe

  • Flux Cored Arc Welding (FCAW)
  • Gas Tungsten Arc Welding (GTAW)
  • Non-Consumable Electrode
  • Continuous Wire Feeding
  • Plasma Arc Welding (PAW)
  • Manual Welding
  • Consumable Electrode
  • Shielded Metal Arc Welding (SMAW)
  • Gas Shielded
  • Submerged Arc Welding (SAW)
  • Fluxing
  • Gas Metal Arc Welding (GMAW)

 

Welding Procedure Specification For Carbon Steel Pipe

Industry wise supplies of CS Pipe

Carbon Steel Pipes For Chilled Water

Carbon Steel Pipes For Chilled Water

Carbon Steel Seamless Pipe For Natural Gas

Carbon Steel Seamless Pipe For Natural Gas

Carbon Steel Welded Pipe For Oxygen Service

Carbon Steel Welded Pipe For Oxygen Service

Carbon Steel Galvanized Pipes For Steam

Carbon Steel Galvanized Pipes For Steam

Carbon Steel ERW Pipe For Oil And Gas

Carbon Steel ERW Pipe For Oil And Gas

CS Pipes For Compressed Air

CS Pipes For Compressed Air

Carbon Steel Pipe For High Temperature

Carbon Steel Pipe For High Temperature

CS Seamless Pipe For Sulfuric Acid

CS Seamless Pipe For Sulfuric Acid