"Government Recognised Star Export House"- info@lgpipeindia.com
Incoloy 825 Pipe
Incoloy 825 grade is a nickel-chromium alloy. An Incoloy 825 Pipe showcases excellent corrosion and oxidation resistance. The pipes are embedded with a small content of copper, molybdenum, and titanium along with the other constituents. This gives the Alloy 825 Pipe enhanced tolerance to localized attacks from crevice corrosion and pitting by acids. These pipes work well in sulphuric and phosphoric systems when reducing acids work at the highest degree. The Incoloy Pipe can be hot or cold rolled to enhance its workability. They cannot be heat treated and have a permissible pressure vessel temperature of 800 degrees F. These pipes can be readily welded to subsequent piping modules, making use of standard welding procedures.
A Incoloy 825 Tube possesses excellent mechanical properties. These tubes are designed with a tensile strength of 770mpa with a yield strength of 440mpa. They can be readily elongated in place by 35%. The Alloy 825 Tube has a density of 8.14 g/cm3 and possesses a melting point between 1370 to 1400 degrees C. These tubes have a modulus of elasticity of 28.4 x 103 (196 x 103) in tension. The robust Incoloy Tube is a feature in sulphuric acid piping, chemical processing equipment, tank trucks, expansion bellows, marine exhaust system, pollution control, and nuclear fuel reprocessing. They are also used in pickling equipment like tanks, heating coils, and baskets.
The ASTM B423 UNS N08825 is a grade that covers non-pressurized vessels in the 825 Incoloy alloys. These components lay down standards that are needed to be followed while manufacturing boiler vessels and pressure vessels grades. A Incoloy 825 Seamless Pipe is designed by passing hot steel billets through an extruded metal grade to shape them precisely. The pipes of seamless configurations have higher load-bearing capacity and strength over other grades. This coupled with the material used in their manufacturing, makes them a little expensive. The piping components in this grade are available at affordable rates at all our outlets. Contact us or visit us to find out more.
ASTM B423 UNS N08825 & Alloy 825 Seamless Tube supplier in India
Incoloy 825 Seamless Pipe and UNS N08825 Tube manufacturer in India
Incoloy 825 Tubing Specifications
| ASTM Specification |
ASTM B423, ASTM B705, ASTM B829, ASTM B163, ASTM B775, ASTM B751, ASTM B704 |
|---|---|
| International Specifications |
ISO 6207, DIN 17751, VdTüV 432 |
| Standard | JIS, TOCT, GB, AMS, EN, ASTM, AISI, SAE, ASME, DS, NF, DTD, DIN |
| UNS N08825 Welded Pipes Size | 5.0 - 1219.2 mm |
| Alloy 825 Seamless Pipes Size | 4 to 219mm W. T.: 0.5 to 20mm |
| Incoloy 825 EFW Pipes size | 5.0 - 1219.2 mm |
| 825 Incoloy Pipes Schedule | SCH5, SCH140, SCH80, XS, SCH10, SCH10S, SCH80, XXS, SCH120, SCH60, SCH30, STD, SCH20, SCH40S, SCH160, SCH40 |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Finish | BA (Bright & Annealed), Polished, AP (Annealed & Pickled), NO.1, MF, 2B, NO.4, HL, BA, Mirror finish, 8K etc |
| Length | Single Random, Standard & Cut length , Double Random Pipe |
| Form | Incoloy 825 Pipes are available in form of Square, Round, Rectangular, Hollow, Coiled, Hydraulic, Straight Pipes, Pan Cake Coils, “U” Shape etc. |
| End of Alloy 825 Pipe | Beveled End, Plain End, Screwed ends, Treaded Pipe |
| Type of WERKSTOFF NR. 2.4858 Pipe | ERW/ Seamless / Welded / EFW / CDW / Fabricated /CEW/ DOM Incoloy 825 Pipe |
| Application of Incoloy 825 Pipe | Oil Pipe, Dairy Pipe, Boiler Pipe, Fluid Pipe, Gas Pipes for Chemical Industry |
| Marking on ASTM B423 Incoloy 825 Pipe | All ASTM B423 Incoloy 825 Pipes are marked as follows: Grade, Standard, Thickness, OD, Heat No. (Or according to the customer’s request.), Length |
| Specialize in | Large Diameter Incoloy 825 Pipe |
| Value Added Service | Polish (Electro & Commercial) Annealed & Pickled Bending, Draw & Expansion as per required Size & Length, Machining Etc. |
| manufacturing Technique of 825 Alloy Pipe | hot drawn, Cold drawn, solid solution, bright annealed, hot extruding |
| Test Certificate of UNS N08825 Pipe |
|
| Our stockyard of Incoloy 825 Pipe | New Delhi, Pimpri-Chinchwad, Port-of-Spain, Abu Dhabi, Gimhae-si, Tehran, Bogota, Karachi, Gujarat, Dammam, Nagpur,Indore, Chennai, Baroda, Ludhiana, Sydney, Kanpur, Istanbul, Ahmedabad, Gurgaon, Riyadh, Noida, Surat, Tau, Courbevoie, Howrah, Bangalore, Caracas, Hyderabad, Lagos, London, Mumbai, Ernakulam, Mexico, Manama, Bengaluru, Ahvaz, Ranchi, Jamshedpur, Montreal, India, Muscat, Coimbatore, Perth, Kolkata, Kuwait, Calgary, Vadodara, Rajkot, Santiago, Ankara, Janeiro, Khobar, Melbourne, Thiruvananthapuram |
| Manufacturers of NCF 825 Pipe |
|
| Material Test Certificates (MTC) |
|
| Incoloy 825 Pipes Dimension ANSI/ ASME B36.10, B36.19, B2.1 We can also thread, cut and groove UNS N08825 Pipes to meet your specifications. | |
Chemical Composition Of Incoloy 825 Tube
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ti | |
| 825 | min. | - | - | - | 22.0 | - | 19.5 | 1.5 | 0.6 |
| max. | 0.05 | 1.0 | 0.5 | - | 0.015 | 23.5 | 3.0 | 1.2 | |
Before buying compare our price with other Incoloy 825 ERW Pipe and Incoloy Tube manufacturer
Alloy 825 Pipe Equivalent Grades
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Incoloy 825 | N08825 | NA 16 | NiCr21Mo | 2.4858 | NFE30C20DUM | ЭП703 | NCF 825 |
Mechanical Properties Of Alloy 825 Tube
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 825 | Psi - 80,000 , MPa - 550 | Psi - 32,000 , MPa -220 | 30 | - | - |
Check latest price of Incoloy WERKSTOFF NR. 2.4858 Pipe and Alloy 825 Tube ex Mumbai. Ask for free sample.
| Description | Per Unit (INR) |
|---|---|
| SMLS PIPE INCOLOY 825 3/4 SCH80S PIPES SMLS COLD FINISHED ANNEALED PE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVIE - | 9,003 |
| SMLS PIPE INCOLOY 825 2 SCH40S PIPES SMLS COLD FINISHED ANNEALED BE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVICE - | 20,167 |
| SMLS PIPE INCOLOY 825 3 SCH40S PIPES SMLS COLD FINISHED ANNEALED BE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVICE - | 41,415 |
| SMLS PIPE INCOLOY 825 1 SCH80S PIPE SMLS COLD FINISHED ANNEALED PE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVICE - | 11,404 |
| SMLS PIPE INCOLOY 825 1.1/2 SCH80S PIPES SMLS COLD FINISHED ANNEALED PE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVIC | 19,207 |
| NICKEL ALLOY PIPES / TUBES DN 1200 INCOLOY 825 ASTM B705 | 281 |
| NICKEL ALLOY SEAMLESS PIPES GRADE INCOLOY 825 ( NI-40%, MO-3%) | 517 |
Incoloy Tube Inspection & Test Reports
- Mill Test Certificates with all Incoloy 825 Pipe
- EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2 Material Test Certificates (MTC)
- Chemical Reports
- Mechanical Reports
- PMI Test Reports
- Visual Inspection Reports
- Third Party Inspection for Incoloy 825 Pipe
- NABL Approved Lab Reports
- Destructive Test Report
- Non Destructive Test Reports
- 100% Radiography Test Report
- Fumigation Certificates
- Raw Materials Certificate
- Moisture testing
- Heat Treatment Charts
- Surface roughness measurement
- HS Code Commercial Invoice
- Laboratory Test Certificate from Govt. Approved Lab
- Form A for Generalized System of Preferences (GSP)
Cold Drawn & Hot Finished Inconel 825 Pipe and 2.4858 Inconel 825 Condenser & Heat-Exchanger Tubes in wide variety of shapes and forms
Incoloy 825 Tubing Pressure Rating
| TUBE O.D. (IN.) |
WALL THICKNESS OF TUBE (INCHES) | |||||||
|---|---|---|---|---|---|---|---|---|
| .028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
| WORKING PRESSURE (PSIG) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 2200 | 3000 | 4000 | 4600 | ||||
| 1 | 2200 | 2900 | 3400 | 3900 | 4300 | |||
Features Of Incoloy 825 Seamless Pipe
- Excellent resistance to decreasing and also oxidizing acids
- Good resistance to stress-corrosion cracking
- Satisfactory resistance to localized attack as pitting or crevice corrosion
- Very resistant to sulfuric and also phosphoric acids
- Good mechanized properties at both room and also increased temperatures as much as approximately 1020° F
- Permission for pressure-vessel utilize at wall temperature ranges up to 800°F
Find your size and length in our online inventory of ASME SB 423 UNS N08825 Incoloy 825 Pipe produced as per DIN 17751, ISO 6207, VdTÜV 432
Incoloy 825 Pipe
Incoloy 825 Tube
Alloy 825 Pipe
Alloy 825 Tube
Incoloy 825 Tubing
Incoloy 825 ERW Pipe
Incoloy Pipe
Incoloy Tube
Incoloy 825 Seamless Pipe
Alloy 825 Seamless Pipe
Incoloy 825 Welded Pipe
ASME SB 423 Uns N08825 Erw Pipe
Stockist, Distributor and Exporter of ASTM B163 UNS N08825 Welded Tube, Alloy 825 Pipe, Find latest price of Nickel 825 Exhaust & Coiled Tubing in various sizes
HS Code Of Incoloy 825 Welded Pipe
| HS Code | Description |
|---|---|
| 73061919 | SMLS PIPE INCOLOY 825 3/4 SCH80S PIPE SMLS COLD FINISHED ANNEALED PE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVIE - |
| 73061919 | SMLS PIPE INCOLOY 825 2 SCH40S PIPE SMLS COLD FINISHED ANNEALED BE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVICE - |
| 73061919 | SMLS PIPE INCOLOY 825 3 SCH40S PIPE SMLS COLD FINISHED ANNEALED BE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVICE - |
| 73061919 | SMLS PIPE INCOLOY 825 1 SCH80S PIPE SMLS COLD FINISHED ANNEALED PE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVICE - |
| 73061919 | SMLS PIPE INCOLOY 825 1.1/2 SCH80S PIPE SMLS COLD FINISHED ANNEALED PE. B423 UNS NO8825 DIMS TO ASME B36.10 SOUR SERVIC |
| 75071200 | NICKEL ALLOY PIPES / TUBES DN 1200 INCOLOY 825 ASTM B705 |
| 7507200 | NICKEL ALLOY SEAMLESS PIPES GRADE INCOLOY 825 ( NI-40%, MO-3%) |
ASME SB 423 UNS N08825 Erw Pipes Application
- Radioactive waste handling
- Oil and gas recovery
- Hot vessels for food, water, and seawater
- Nuclear fuel reprocessing
- Pickling tank heaters, tanks, and equipment
- Calorifiers
- Pollution control
- Chemical processing
- Marine exhaust systems
- Acid production
Stock List of Incoloy 825 Pipe
| UNS N08825 Incoloy 825 Seamless Pipes | Incoloy 825 Alloy Square Tube |
| Alloy 825 2.4858 Seamless Pipes | Alloy 825 Seamless Tube |
| UNS N08825 Incoloy 825 Hollow Pipes | Incoloy 2.4858 Shell And Tube Heat Exchanger |
| Alloy 825 Round Pipes | Incoloy 825 Alloy Rectangular Tube |
| Incoloy 825 Thick Wall Pipes | ASTM B165 UNS N08825 Incoloy Tube |
| SCH40 Incoloy Grade 825 pipes | UNS N08825 Incoloy 825 Tube |
| Alloy 825 Polished Pipes | Incoloy 2.4858 Thick Wall Tube |
| Incoloy 825 Alloy Thin Wall Pipes | Marine Grade Alloy 825 Tube |
| Alloy 825 Welded Pipes | Grade Incoloy 825 Box Tube |
| UNS N08825 Incoloy 825 clad pipes | Incoloy 2.4858 Boiler Tube |
| Incoloy 825 Alloy Seamless Pipes | Grade Incoloy 825 Braided Tube |
| Alloy 825 Pipes | UNS N08825 Incoloy 825 Capillary Tube |
| Incoloy N08825 ERW Pipes | Alloy 825 2.4858 Cylinder Tube |
| Incoloy 825 Alloy Welded Pipes | Incoloy 2.4858 Coil Tube |
| Incoloy Grade 825 Electropolish Pipes | Alloy 825 Dairy Tube |
| Alloy 825 Polished Pipes | Alloy 825 2.4858 Dom Tube |
| Incoloy 825 Alloy Decorative Pipes | Incoloy 2.4858 Decorative Tube |
| Alloy 825 Square Pipes | 2.4858 Incoloy Exhaust Tube |
| Incoloy 825 Alloy Polished Pipes | Alloy 825 Elliptical Tube |
| Alloy 825 2.4858 Rectangular Pipes | Incoloy 2.4858 Flex Tube |
| 2.4858 Incoloy exhaust pipes | Alloy 825 Fin Tube |
| Alloy 825 schedule 40 pipes | Incoloy 825 Alloy Fuel Tube |
| Incoloy Grade 825 schedule 10 pipes | Alloy 825 Finned Tube Heat Exchangers |
| Pipes AISI 2.4858 Incoloy | Incoloy 825 Alloy Gas Tube |
| Alloy 825 2.4858 flex pipes | Alloy 825 Grooved Tube |
| Grade Incoloy 825 grade pipes | Alloy 825 2.4858 Hydraulic Tube |
| Jindal Alloy 825 Pipes | Alloy 825 Heat Exchanger Tube |
| UNS N08825 Incoloy 825 straight pipes | Alloy 825 2.4858 Handrail Tube |
Africa, Europe, Middle East And Far East Asia Imports Incoloy 825 Tubing Regularly
Shire Australia Pty Ltd
Incoloy 825 Pipe
Solagran Ltd
Incoloy 825 Tube
Sun Pharma ANZ
Alloy 825 Pipe
Table of Contents