ASTM A335 P12 Pipe

ASTM A335 P12 Pipe

ASTM A335 P12 is a low-alloy ferritic grade. The ASTM A335 P12 Pipe is designed with an outstanding composition consisting of carbon, manganese, phosphorous, sulfur, silicon, chromium, and molybdenum. The chrome moly P12 Pipe shows excellent resistance to corrosive media as well as oxidative reducers in stress-induced environments. In the SA335 P12 Boiler Pipe, volatile gases and fluids are processed. Here the pipes possess good tolerance and can withstand fluctuating temperatures and pressures in these stress-induced setups. The SA 335 P12 Material possesses outstanding mechanical properties. They have a minimum tensile strength of 415mpa with a minimum yield strength of 205mpa. The robust modules of the A335 P12 Pipe can be readily elongated by 30%. The versatile pipes are a feature in catering services, general corrosion applications, heat exchangers, oil and gas drilling boilers, and instrumentation equipment.

The Alloy Steel P12 Pipe is a high-strength grade that is generally designed in a seamless configuration as these pipes are put under tremendous stress and torsion. A P12 Seamless Pipe is produced by passing hot steel billets through an extruded metal grade to precisely shape them in the correct dimensions. The versatile A335 P12 Smls Pipe is generally designed in sizes up to 24 inches. These pipes don’t have any welds and showcase outstanding load-bearing capacity and strength, propelling them to be a handy pipe in extreme conditions. The pipes in the P12 grade can be further processed in a hot or cold rolling process. The A335 Gr P12 Hot Rolled Pipe is processed at temperatures up to 1700 degrees F, where they reach their recrystallization level. These pipes may possess a rough or uneven surface finish. The process of producing the ASTM A335 Gr P12 Cold Drawn Pipe starts soon after the hot rolling stage. In this process, the strength and tolerance of the piping grade is improved. The aesthetically appealing grade produced in India is cheaper to purchase when compared to other countries due to the abundant availability of labour and raw material. Get in touch with us to know more about the pipes in this grade.

 

½ to 48 inch SA 335 P12 Seamless Pipe and ASTM A335 Grade P12 Pipe supplier in India

comment image

Table of Contents


ASTM A335 P12 Pipe

Save 10-12% if you buy directly from P12 Pipe manufacturers in India, check EN 1.7335 ASTM P12 alloy pipe specification

ASTM A335 P12 Pipe Specification

Size 1/8NB TO 24NB IN
Type Seamless
Outer Dimensions 19.05 milimeter – 114.3 milimeter
ASTM A335 P12 pipes Wall Thickness 2.0 milimeter – 14 milimeter
Length max 16000 milimeter
Schedule Schedule 20 - Schedule XXS (heavier on request) up to 250 milimeter thk.
Length Single Random, Double Random & Cut Length.
Tubing End Plain End, Beveled End, Treaded.
Thickness 3-12 milimeter
Schedule SCHEDULE 40, 160, 80, XXS, XS, All Schedules
Origin European, Japanese, Korean, US, Russian, Indian (Strictly No Chinese Material)
Tolerance Cold drawn tubes: +/-0.1 milimeter
Cold rolled tubes: +/-0.05 milimeter
Craft Cold drawn and Cold rolled
Type Seamless / Welded / ERW / Fabricated
available in Form of Round, Square, Rectangular, Hydraulic Etc.
Length Double &
Standard
In Cut length also.
Specialized in Large Dia SA335 P12
Application Seamless Ferritic AS Pipes for High-Temperature Service

P12 Pipe Chemical Composition

C, % Mn, % P, % S, % Si, % Cr, % Mo, %
0.015 maximum 0.30-0.61 0.025 maximum 0.025 maximum 0.50 maximum 0.80-1.25 0.45-0.65

View A335 gr P12 Welded Pipe and P12 Alloy Steel Seamless Pipe, Check ASTM A335 Grade P12 chrome pipe Price per ton

Alloy Steel P12 Pipe Price

Description Price Per Ton in USA $ Price Per Ton in INR Price Per Ton in UAE Dirham
ASTM a335 P12 seamless steel pipes USA $ 500 INR 36573.53 AED 1836.55
ASTM A335 P12 Seamless steel pipes/tube USA $ 600 INR 43888.23 AED 2203.86
ASTM A335 P12 Seamless and Welding Sch80 XS Sch160 XXS Alloy Steel pipes USA $ 550 INR 40053.23 AED 2020.26
ASTM A335 P12 seamless carbon steel alloy pipes USA $ 700 INR 50976.83 AED 2571.24
ASTM A335 P12 black painted beveled ends seamless pipes USA $ 600 INR 43888.23 AED 2203.86

Mechanical Properties of SA 335 P12 Material

Tensile Strength, MPa Yield Strength, MPa Elongation, %
415 minimum 205 minimum 30 minimum
Check you size of ASME SA335 P12 material and UNS K11562 High-Pressure Pipe, ASME SA335 Gr P12 Welded Pipe in our online inventory at competitive pricing, View Dimension and Weight chart

A335 P12 Pipe Dimension

Sizes NPS Wall Thk Pipes Outer Dia. Pipes Inner Dia. Gallon Capacity Per Linear Foot Std to XXHY Weight per Foot sch
Pipes #		 Section Modulus
1/2 inch 0.109 0.84 0.622 .0158 STD 0.85 40 .0407
0.147 0.546 .0122 XHY 1.09 80 .0478
0.188 0.464 .0088 1.31 160 .0528
0.294 0.252 .0026 XXHY 1.72 .0577
3/4 inch 0.113 1.05 0.824 .0277 STD 1.13 40 .0705
0.154 0.742 .0225 XHY 1.48 80 .0853
0.219 0.612 .0153 1.95 160 .1006
0.308 0.434 .0077 XXHY 2.44 .1103
1 inch 0.133 1.315 1.049 .0449 STD 1.68 40 .1328
0.179 0.957 .0374 XHY 2.17 80 .1606
0.250 0.815 .0271 2.85 160 .1904
0.358 0.599 .0146 XXHY 3.66 .2136
1 1/4 inch 0.140 1.66 1.380 .0777 STD 2.27 40 .2346
0.191 1.278 .0666 XHY 3.00 80 .2913
0.250 1.160 .0549 3.77 160 .3421
0.382 0.896 .0328 5.22 .4110
1 1/2 inch 0.145 1.90 1.610 .1058 STD 2.72 40 .3262
0.200 1.500 .0918 XHY 3.63 80 .4118
0.281 1.338 .0730 4.86 160 .5079
0.400 1.100 .0494 6.41 .5977
2 inch 0.109 2.375 2.157 .1898 2.64 10 .4205
0.154 2.067 .1743 STD 3.66 40 .5606
0.218 1.939 .1534 XHY 5.03 80 .7309
0.250 1.875 .1434 5.68 .8045
0.281 1.813 .1344 6.29 .8666
0.344 1.687 .1161 7.47 160 .9806
0.436 1.503 .0922 XXHY 9.04 1.1043
2 1/2 inch 0.120 2.875 2.635 .2833 3.53 10 .6870
0.203 2.469 .2487 STD. 5.80 40 1.0640
0.216 2.443 .2435 6.14 1.1169
0.250 2.375 .2301 7.02 1.2468
0.276 2.323 .2202 XHY 7.67 80 1.3386
0.375 2.125 .1842 10.02 160 1.6371
0.552 1.771 .1280 XXXHY 13.71 1.9971
3inch 0.120 3.50 3.260 .4336 4.34 1.0411
0.156 3.188 .4147 5.58 1.3122
0.172 3.156 .4064 6.12 1.4265
0.188 3.124 .3984 6.66 1.5342
0.216 3.068 .3840 STD. 7.58 40 1.7241
0.250 3.000 .3672 8.69 1.9372
0.281 2.938 .3521 9.67 2.1207
0.300 2.900 .3431 XHY 10.26 80 2.2253
0.438 2.624 .2811 14.34 160 2.8774
0.600 2.300 .2158 XXHY 18.6 3.4243
3 1/2inch 0.120 4.0 3.760 .5768 4.98 10 1.3776
0.226 3.548 .5136 STD. 9.12 140 2.3939
0.250 3.500 .4998 10.02 2.6001
0.281 3.438 .4821 11.17 2.8562
0.318 3.364 .4617 XHY 12.52 80 3.1400
0.636 2..728 .3085 XXHY 22.87 4.8795
4inch 0.120 4.5 4.260 .7404 5.62 10 1.7612
0.156 4.188 .7156 7.24 2.2354
0.188 4.124 .6942 8.67 2.6296
0.203 4.094 .6838 9.32 2.8173
0.219 4.062 .6725 10.02 3.0184
0.237 4.026 .6613 STD. 10.80 40 3.2145
0.250 4.000 .6528 11.36 3.3611
0.281 3.938 .6326 12.67 60 3.7021
0.312 3.876 .6126 13.97 4.0273
0.337 3.826 .5972 XHY 15.00 80 4.2713
0.438 3.624 .5361 19.02 120 5.1790
0.531 3.438 .4822 22.53 160 5.8997
0.674 3.152 .4054 XXHY 27.57 6.7927
5inch 0.188 5.563 5.187 1.0979 10.80 4.1161
0.219 5.125 1.0716 12.51 4.7279
0.258 5.047 1.0391 STD. 14.63 40 5.4500
0.281 5.001 1.0204 15.87 5.8644
0.312 4.939 .99647 17.51 6.4074
0.344 4.875 .9696 19.19 6.9358
0.375 4.813 .9449 XHY 20.80 80 7.4300
0.500 4.563 .8495 27.06 120 9.2534
0.625 4.313 .7590 32.99 160 10.7976
0.750 4.063 .6734 XXHY 38.59 12.0954
6inch 0.109 6.625 6.407 1.6748 7.59 5 3.5769
0.134 6.357 1.6488 9.30 10 4.3475
0.156 6.313 1.6260 10.79 5.0107
0.188 6.249 1.5937 12.94 5.9351
0.203 6.219 1.5780 13.94 6.3804
0.219 6.187 1.5620 15.00 6.8261
0.250 6.125 1.5306 17.04 7.6905
0.280 6.065 1.5008 STD. 18.99 40 8.4958
0.312 6.001 1.4688 21.06 9.3416
0.344 5.937 1.4391 23.10 10.111
0.375 5.875 1.4082 25.05 10.893
0.432 5.761 1.3541 XHY 28.60 80 12.224
0.500 5.625 1.2909 32.74 13.711
0.562 5.501 1.2346 36.43 120 14.9806
0.625 5.375 1.1787 40.09 16.1821
0.719 5.187 1.0977 45.39 160 17.8243
0.864 4.897 .9784 XXHY 53.21 20.025
1.000 4.625 .8727 60.13 21.7719
1.125 4.375 .7809 66.14 23.1237

AS P12 Pipe For Sale

ASTM A335 P12 Alloy Steel Boiler Pipes ASTM A335 P12 Stress Relief Annealed Pipes
P12 Seamless tubes and Pipes for Power Plants ASTM A335 P12 alloy Pipes
P12 Cold drawn seamless tubes for heat exchangers and boilers ASTM A335 P12 Boiler Pipes
Chrome Moly Alloy Pipes ASTM A335 P12 ASTM A335 P12 High Temperature Pipes
ASTM A335 P12 alloy grade material Pipes P12 Seamless hot finished tubes and Pipes boilers
ASTM A335 P12 Ferritic Alloy-Steel Pipes ASTM A335 P12 Cold Drawn Seamless Pipes
SCH 20 ASTM A335 P12 ASTM A691 P12 Welded & Drawn over Mandrel (DOM) Pipes
ASTM A335 P12 HREW Alloy Steel Tubing ASTM A335 P12 Square Pipes/ Tube
ASTM A335 P12 cold drawn round alloy steel tube ASTM A335 P12 Rectangular Pipes/ Tube
CDW ASTM A335 P12 Pipes ASTM A335 P12 High Pressure Steel Pipes
ASTM A335 P12 Round Pipes/ Tubes ASTM A335 P12 seamless Pipes
ASTM A335 Gr. P12 casing Pipes ASTM A335 P12 U Bend
ASTM A335 P12 Heat Exchanger Pipes ASTM A691 P12 Welded Pipes/ EFW Pipes
Seamless ASTM A335 P12 Pipes ASTM A691 P12 Welded Mechanical Alloy Steel Tube
erw ASTM A335 P12 Pipes ASTM A691 P12 Welded Round Hot Rolled Electric Weld
Fabricated ASTM A335 P12 Pipes ASTM A335 P12 Seamless Mechanical Steel Tube
ASTM A335 P12 Alloy Steel Seamless Pipes ASTM A335 P12 steel Pipes

SA335 P12 Boiler Pipe Testing

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Intergranular Corrosion (IGC) Test

ASTM A335 Gr P12 Cold Drawn Pipe Test Certificate

  • EN 10204/3.1B,
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc

A335 P12 Smls Pipes Equivalent

ASTM Equivalent material ASME JIS G 3458 BS LRS UNS DIN ABS ISO NK
A335 P12 T12 SA335 P12 STPA 22 3604 P1 620-440 Sec 2
1Cr 1/2Mo440		 K11562 17175
13CrMo44		 ABS 12 - KSTPA 22
Sec 3
1Cr 1/2Mo440

Features of A335 Gr P12 Hot Rolled Pipes

  • Each bundle covered with plastic for protection against extreme weather.
  • End of A335 Grade P5, P9, P11, P22, P91 Alloy Steel Seamless Pipes protected by plastic caps.
  • Bundles strapped with plastic strips.
  • Each radius of U-Bend tube separated by a separator.
  • Packaging list (laminated) placed with box/crate.
Don't forget to compare our UNS K11562 High-Pressure Pipes and SA335 P12 Pipe Price with other ASTM A335 P12 Grade Pipes stockist in India and Asia

SA335 P12 Boiler Pipes Application

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Types of ASTM A335 P12 Pipe

ASTM A335 P12 Pipe

ASTM A335 P12 Pipe

P12 Pipes

P12 Pipes

Alloy Steel P12 Pipes

Alloy Steel P12 Pipes

SA 335 P12 Material

SA 335 P12 Material

A335 P12 Pipes

A335 P12 Pipes

SA335 P12 Pipes

SA335 P12 Pipes

A335 P12 Smls Pipes

A335 P12 Smls Pipes

A335 Gr P12 Hot Rolled Pipes

A335 Gr P12 Hot Rolled Pipes

SA335 P12 Boiler Pipes

SA335 P12 Boiler Pipes

P12 Seamless Pipes

P12 Seamless Pipes

ASTM A335 Gr P12 Cold Drawn Pipes

ASTM A335 Gr P12 Cold Drawn Pipes

Exporter and stockholder of P12 Square Pipes, ASME SA 335 Alloy Steel P12 Pipes and ASTM A335 P12 Pipes for flexible natural gas line

Tolerance Chart of P12 Welded Pipes

NPS OD Tolerance NPS WT Tolerance
1/8 inches ≤ NPS ≤ 1 1/2 inches +/- 0.4 1/8 inches ≤ NPS ≤ 2 1/2 inches , All T/D ratios. +20%, -12.5%
1 1/2 < NPS ≤ 4 inches +/- 0.79 NPS ≥ 2 1/2 inches , T/D ≤ 5% +22.5%, -12.5%
4 inches < NPS ≤ 8 inches +1.59, -0.79 NPS ≥ 2 1/2 inches , T/D > 5% +15%, -12.5%
8 inches < NPS ≤ 12 inches +2.38, -0.79 (T= Specified Wall Thickness; D = Specified Outside Diameter)