ASTM A333 Grade 6 Pipe

ASTM A333 Grade 6 Pipe

What is ASTM A333 GR 6?

ASTM A333 is a grade that covers seamless and welded configurations. The ASTM A333 Grade 6 Pipe is intended for use in low temperatures up to -45 degrees C. These pipes are designed with a chemical composition of carbon, manganese, phosphorous, sulfur, and silicon. ASTM A333 Grade 6 Nace Pipe is used to transport high-pressure fluids and gases from one location to the other. These pipes are highly resistant to corrosive and oxidative media during the vigorous cycle. The Ltcs ASTM A333 Gr 6 Schedule 40 Pipe has higher thermal expansion along with low thermal conductivity in low-temperature setups. The versatile Large Diameter A333 Grade 6 Pipe is employed to transport large volumes of fluids and gases rapidly across an array of environments. The A333 Gr 6 Material is designed with a minimum tensile strength of 60,000 psi with a minimum yield strength of 35,000 psi.

A333 Gr 6 ERW Pipe vs A333 Seamless Pipe

  • ERW in the A33 gr 6 is manufactured by rolling the material and passing it over dies to create a longitudinal seam followed by welding it in place by passing a high voltage electric current. A333 Grade 6 Seamless Pipe is produced by passing hot steel billets through extruded metal to precisely shape the grade.
  • A333 Gr 6 ERW Pipe has thin and light walls. Seamless pipes are designed with thick walls that are very heavy.
  • The A333 Seamless Pipe has 20% higher load-bearing capacity and strength than a standard erw pipe.
  • A333 Welded Pipe Material is cheaper than seamless pipe grade.

What is A333 Galvanized Pipe Material?

Galvanized pipe material is a protective coat that is applied to piping grades. The A333 Galvanized Pipe Material comprises of zinc that is coated on the surface of the pipe grade. The coating of zinc protects the pipe against corrosive and oxidative reducers. The A333 Grade 6 Coated Pipe is aesthetically appealing and provides constant protection to the pipe across stress-induced setups. In polluted environments, the Epoxy Lined SA333 Gr 6 Material can be used to fight these harsh environments. The surface tolerant epoxy material can be coated easily over the galvanized grade. The SA 333 Gr 6 Lined Pipe Material can be custom designed for different conditions.

Thick Wall SA333 Pipe vs Thin Wall ASTM A333 Pipe

Pipes of the A333 grade are designed based on their wall thickness. The thickness of the wall determines the different aspects of the grade.

  • Thick Wall SA333 Pipe is designed to work in pressurized applications where they are subjected to high-pressure and temperatures. Thin Wall ASTM A333 Pipe is a feature in non-pressurized vessels for moderate pressure and temperature setups.
  • A333 Carbon Steel Double Wall Pipe is designed with outstanding strength and load-bearing capacity over the thin walled pipes.
  • A Heavy Wall A333 Steel Pipe is designed following a hot forming process, while a thin wall pipe is designed in a cold rolling process.

Benefits if you buy from ASTM A333 Grade 6 Pipe manufacturers?

ASTM A333 Grade 6 pipe is manufactured with different chemical components and features. The SA333 gr6 Cement Lined Pipe can be custom designed as per customer liking if it is purchased directly from the manufacturer. A pipe manufacturer can drastically help improve the lifespan of the products as they are subjected to vigorous testing and are only manufactured when the demand arises. Furthermore, timely delivery and cost-saving can be easily achieved when you purchase directly from a pipe manufacturer.

 

SA 333 Gr 6 and A333 Seamless Pipe manufacturer in India

ASTM A333 Grade 6 Pipe manufacturers

ASTM A333 Grade 6 Pipe Specification

SpecificationsASTM A333 ASME SA333
DimensionsASTM, ASME and API
Size1/2” NB to 36” NB
Thickness3-12mm
SchedulesSCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
TypeSeamless / ERW / Welded / Fabricated
FormRound, Hydraulic Etc
LengthMin 3 Meters, Max18 Meters, or according to customer’s requirement
EndPlain End, Beveled End, Treaded

Types Of ASTM A333 Grade 6 Pipe

A333 Pipes

A333 Pipes

SA 333 Gr 6 Pipes

SA 333 Gr 6 Pipes

ASTM A333 Grade 6 Pipe

ASTM A333 Grade 6 Pipe

A333 Grade 6 Pipes

A333 Grade 6 Pipes

A333 Seamless Pipes

A333 Seamless Pipes

LTCS ASTM A333 Gr 6 Pipes

LTCS ASTM A333 Gr 6 Pipes

A333 Material

A333 Material

A333 Pipe Material

A333 Pipe Material

A333 Gr 6 ERW Pipes

A333 Gr 6 ERW Pipes

A333 Grade 6 Coated Pipes

A333 Grade 6 Coated Pipes

Ltcs ASTM A333 Gr 6 Schedule 40 Pipes

Ltcs ASTM A333 Gr 6 Schedule 40 Pipes

A333 Welded Pipes Material

A333 Welded Pipes Material

A333 Galvanized Pipes Material

A333 Galvanized Pipes Material

Thick Wall SA333 Pipes

Thick Wall SA333 Pipes

Thin Wall ASTM A333 Pipes

Thin Wall ASTM A333 Pipes

A333 Gr 6 Material

A333 Gr 6 Material

Large Diameter A333 Grade 6 Pipes

Large Diameter A333 Grade 6 Pipes

SA 333 Gr 6 Lined Pipes Material

SA 333 Gr 6 Lined Pipes Material

A333 Grade 6 Seamless Pipes

A333 Grade 6 Seamless Pipes

ASTM A333 Grade 6 Nace Pipes

ASTM A333 Grade 6 Nace Pipes

Epoxy Lined SA333 Gr 6 Material

Epoxy Lined SA333 Gr 6 Material

Heavy Wall A333 Steel Pipes

Heavy Wall A333 Steel Pipes

A333 Carbon Steel Double Wall Pipes

A333 Carbon Steel Double Wall Pipes

SA333 gr6 Cement Lined Pipes

SA333 gr6 Cement Lined Pipes

Supplier of A333 Gr 6 ERW Pipe and SA 333 Gr 6 Material in all sizes according to ISO/ EN, External/ Internally Coated, check A333 Steel properties, price and equivalent

Physical Properties Of A333 Gr 6 Erw Pipes

Density (lb / cu. in.)0.284
Specific Gravity7.9
Specific Heat (Btu/lb/Deg F - [32-212 Deg F])0.105
Melting Point (Deg F)2750
Thermal Conductivity360
Mean Coeff Thermal Expansion6.3
Modulus of Elasticity Tension30
Modulus of Elasticity Torsion11

ASTM A333 Gr 6 Price List

DescriptionPer Unit (INR)
HOT FINISHED SEAMLESS STEEL PIPES ASTM A/ASME A333 Gr 6 SIZE(MM): 48.30 X 5.08 X 6000 (6.000 MTR)301
HOT FINISHED SMLS STEEL PIPES ASTM A/ASME A333 Gr 6 SIZE(MM): 88.90 X 5.49 X 6000 (6.000 MTR)257
HOT FINISHED SEAMLESS CARBON STEEL PIPES ASTM A333M GR.6, BEVEL ENDS (SIZE: 406.40 X 7.92 X 10000 MM) (72 PCS)234
WELDED STEEL PIPES ASTM A 333 GR.6(DIA141.30X6.55)36
WELDED STEEL PIPES DIA323.90X6.35 ASTM A333 GR.636

ASTM A333 Grade 6 Equivalent

FormerNew
ExecutionStandardMaterialStandardMaterial
SeamlessASTM A333GRADE 6EN 10216-4P265NL

Manufacturing Methods Of A333 Pipes

Manufacturing Methods Of A333 Pipes

Looking for A333 Pipe manufacturer in India? Exporter of ASME B36.19/ B36.10 ASTM A333 Seamless Pipe and LTCS ASTM A333 Gr 6 Schedule 40 Pipe with Beveled End, Cement, FBE, Epoxy Lined A333 Carbon Steel Double Wall Pipe at lost cost in India

A333 Grade 6 Coated Pipe End

A333GR6 Beveled Ends (BE)

A333GR6 Beveled Ends (BE)

SA 333 GR 6 Plain Ends (PE)

SA 333 GR 6 Plain Ends (PE)

ASTM A333 Grade 6 Threaded Ends (TE)

ASTM A333 Grade 6 Threaded Ends (TE)

A333 Pipe Chemical Composition


C
MnPSSiCrCuMoNiCbV
Grade 1:0.300.40-1.060.0250.025
Grade 6:0.300.29-1.060.0250.0250.10 minimum0.300.400.120.400.12, maximum0.08 maximum

ASTM A333 Pipe Grades

ASTM A333 Grade 1 Pipes

ASTM A333 Grade 1 Pipes

ASTM A333 Grade 3 Pipes

ASTM A333 Grade 3 Pipes

ASTM A333 Grade 4 Pipes

ASTM A333 Grade 4 Pipes

ASTM A333 Grade 6 Pipes

ASTM A333 Grade 6 Pipes

ASTM A333 Grade 7 Pipes

ASTM A333 Grade 7 Pipes

ASTM A333 Grade 8 Pipes

ASTM A333 Grade 8 Pipes

ASTM A333 Grade 9 Pipes

ASTM A333 Grade 9 Pipes

ASTM A333 Grade 10 Pipes

ASTM A333 Grade 10 Pipes

ASTM A333 Grade 11 Pipes

ASTM A333 Grade 11 Pipes

Manufacturer of A333 Welded Pipe and A333 Galvanized Pipe Material, OD Sch-10/ 40/ 60/ XXS as per NACE MR0175 standard

A333 Seamless Pipe standard

DINENBSNFAASTMASME
DIN 17178 Grade FGP 28EN P265NL Grade 10216-4NFA A 36-2051) Grade A 42 AP A333 Grade6ASME SA 333 Grade 6UNI C20
SA 333 Gr 6 Lined Pipe and ASTM A333 Grade 6 Nace Pipe available in custom cuts, Supply Large Diameter/ Thin /Heavy Wall size A333 Gr 6 Material from stock

Ltcs ASTM A333 Gr 6 Schedule 40 Pipes Size

Nominal BoreSizesOutside Dia40S5S10SS10S20S40S60XS/80SS80S100S120S140S160XXS
MilimeterMilimeterMilimeterMilimeterMilimeterMilimeterMilimeterMilimeterMilimeterMilimeterMilimeterMilimeterMilimeterMilimeterMilimeter
1/8”10.291.21.732.41
1/4”13.721.72.243.02
3/8”17.151.72.313.2
903 1/2”101.65.72.13.15.748.088.08
1004”114.362.13.16.028.568.5611.113.517.1
1255”141.36.62.83.46.559.539.5312.715.919.1
1506”168.37.12.83.47.1110.971114.318.322
2008”219.18.22.83.86.48.1810.312.712.715.119.320.62322.2
25010”273.19.33.44.26.49.2712.712.715.119.321.425.428.625.4
30012”323.99.544.66.410.314.312.717.521.425.428.633.325.4
35014”355.69.544.86.47.911.115.112.719.123.827.831.835.7
40016”406.49.54.24.86.47.912.716.712.721.426.23136.540.5
45018”457.29.54.24.86.47.914.319.112.723.829.434.939.745.2
50020”5089.54.85.56.49.515.120.612.726.232.538.144.550
55022”558.89.54.85.56.49.522.212.728.634.941.347.654
60024”609.69.55.56.46.49.517.524.612.73138.94652.459.5
151/2”21.342.81.72.12.773.733.734.787.47
203/4”26.672.91.72.12.873.913.915.567.82
251”33.43.41.72.83.384.554.556.359.09
321 1/4”42.163.61.72.83.564.854.856.359.7
401 1/2”48.263.71.72.83.685.085.087.1410.2
502”60.333.91.72.83.915.545.549.7411.1
652 1/2”73.035.22.13.15.167.017.019.5314
803”88.95.52.13.15.497.627.6211.115.2
65026”660.49.57.91312.7
70028”711.29.57.91312.7
75030”7629.56.47.97.91312.7
80032”812.89.57.91317.512.7
85034”863.69.57.91317.512.7
90036”914.49.57.91319.112.7

Stock Of A333 Welded Pipe Material

Carbon Steel A333 Rectangular PipesSA 333 gr 6 Hollow Pipes
Large Diameter Seamless Carbon Steel A333 Grade 6 PipesSchedule 80 Seamless A333 Grade 6 Pipes
ASTM A333 Erw Pipes A333 Gr 6 Carbon Steel Casing Pipes
Carbon Steel A333 Grade 6 Schedule 40 PipesASME B36.19 LTCS A333 Gr 6 Pipes
ASTM A333 Gr.6 Carbon Steel Schedule 10 Pipes A333 Grade 6 Double Wall Pipes
SA 333 gr 6 Efw PipesEpoxy lined Carbon Steel A333 Pipes
ASTM A333 Gr 6 Carbon Steel Round PipesPTFE lined A333 Gr 6 Carbon Steel Natural Gas Pipes
ASTM A333 Grade 6 Seamless PipesSeamless Black A333 Gr.6 Carbon Steel Pipes
Carbon Steel A333 Welded PipesSA 333 gr 6 Oval Pipes
LTCS A333 Gr 6 Drill PipesCarbon Steel A333 Grade 6 Grooved Pipes
A333 Grade 6 Square Pipes A333 Gr.6 Carbon Steel Hydraulic Pipes
Epoxy Coated LTCS A333 Gr 6 PipesCement lined A333 Grade 6 Pipes
Schedule 40 Seamless Carbon Steel A333 PipesThin Wall Carbon Steel A333 Pipes

ASTM A333 Grade 6 Yield Strength

GradeYield strength, min, psi (MPa)Tensile strength, min, psi (MPa)Elongation (%)
A333 Gr.635 000 (240)60 000 (415)30 min

A333 Gr 6 Pipe Mechanical Properties

StandardGradeTensile Strength (MPa)Yield Point (MPa)Elongation (%)
YX
ASTM A333Grade 1≥380≥205≥35≥25
Grade 3≥450≥240≥30≥20
Grade 4≥415≥240≥30≥16.5
Grade 6≥415≥240≥30≥16.5
Grade 7≥450≥240≥30≥22
Grade 8≥690≥515≥22
Grade 9≥435≥315≥28
Grade 10≥550≥450≥22
Grade 11≥450≥240≥18

A333 Pipe Temperature Range

GradesThe Low Temp for strike tests
ASME SA333 Gr 1-50-45
ASTM A333 Gr 3-150-100
A333 Gr 4-150-100
A333 Gr 6-50-45
A333 Gr 7-100-75
A333 Gr.8-320-195
A333 Gr 9-100-75
ASTM A333 Gr 10-75-60
A333 Gr.11-320-195

A333 Gr 6 ERW Pipe Test Certificate

  • 100% Radiography Test Report
  • Raw Materials Certificate
  • Third Party Inspection Repor
  • EN 10204/3.1B,

Ultrasonic Testing Of A333 Pipes

Ultrasonic Testing Of A333 Pipes

A333 Gr 6 Allowable Stress

20Ksi to 400F and 18.9ksi to 500F

ASTM A333 Gr 6 Charpy Test

Pipes size:6 inch, schedule 40 pipe
(168.3mm outside diameter x 7.11mm wall thickness)
Standard test temperature
(for Grade 6)
-45°C
Charpy V-notch width:5mm
(max. size that can be taken)

A333 Pipe Welding Procedure

  • ASTM A333 Grade 6 Hot Finished Seamless (HFS)
  • A333 GR 6 Cold Drawn or Finished Seamless (CDS)
  • ASTM A333 GR 6 Electric Resistance Welding (ERW)
  • A333GR6 High Frequency Induction Welding (HFIW)
  • SA 333 GR 6 Hot Finished Welding (HFW) Pipe
  • ASTM A333 Butt Welded Pipes (BWP)
  • A333 Steel Electric Fusion Welding (EFW) Pipes
  • ASTM A333 Gr6 Sub-merged Arc Welding (SAW) Pipes
  • A333 Carbon Steel Cold Drawn Electric Resistance Welding (CEW) Pipes
  • SA333 Gr 6 Oxy Acetylene Welding (OAW) Pipes
  • ASTM A333 Grade 6 Hand-Welding or Manual Arc Welding (MAW) Pipes

ASTM A333 Grade 6 Thermal Conductivity

PropertyTemperatureValue
Coefficient of thermal expansion23.0 °C1E-5 - 1.5E-5 1/K
Melting point1370 - 1530 °C
Specific heat capacity23.0 °C460 J/(kg·K)
Thermal conductivity23.0 °C14 - 31 W/(m·K)

A333 Pipe Wall Thickness

A333 Pipe Wall Thickness

ASTM A333 Grade 6 Csa Equivalent

ASTM A333 gr 6 Csa Equivalent : CSA Z245.1

A333 Pipe Weight

A333 Pipe Weight

ASTM A333 Grade 6 Density

Density (lb / cu. in.) 0.284

A333 Gr 6 Heat Treatment

ASTM A333 Grade 6 pipe for low temperature services at above -45℃. ASTM A333 Grade 6 pipes is common use material for low temperature services in above -45℃, with yield strength minimum at 240 Mpa, and tensile strength 415 Mpa.

ASTM A333 Grade 6 Hardness

A333 Grade 6 low carbon steel show that the hardness value isabout 166.826HV.

A333 Gr 6 Nace Vs A333 Gr 6 Normalized

ASTM A333 Grade 6 Pipes for low temperature services at above -45℃. ASTM A333 Gr 6 Pipes is common use material for low temperature services in above -45℃, with yield strength minimum at 240 Mpa, and tensile strength 415 Mpa.ASTM A333 Grade 6 covers seamless and welded steel Pipes for low temperature service. The Grade 6 alloy steel involved is similar to AISI 4032 low alloy steel. A333 Gr 6 Pipes Used for low temperature service piping down to minus 50 F or 10°C.

ASTM A333 Gr 6 Impact Test

Size of Specimen, minMin. Avg. Notched Bar Impact Value of Each Set of Three SpecimensMin. Notched Bar Impact Value of One Specimen Only of a SetImpact Temperature
ft-lbfJft-lbfJGradeMin Impact
Test Temp
10 by 1013181014 FC
10 by 7.510148111-50-45
10 by 6.67912793-150-100
10 by 579576-50-45
10 by 3.335734
10 by 2.54534

A333 Gr 6 Smls Pipe

ASTM A333 Grade 6 Seamless Pipes

ASTM A333 Grade 6 Seamless Pipes

A333 GR 6 Schedule 40 Seamless Pipes

A333 GR 6 Schedule 40 Seamless Pipes

ASTM A333 GR 6 Cold Drawn Seamless Pipes

ASTM A333 GR 6 Cold Drawn Seamless Pipes

ASTM A333 Gr 6 Material Tolerance Chart

Outside Diameter, inchTolerance, %
1/8≤OD≤2-1/2+20.0/-12.5
3≤OD≤18, WT/OD≤5%+22.5/-12.5
3≤OD≤18, WT/OD>5%+15.0/-12.5
OD≥20, WT/OD≤5%+22.5/-12.5
OD≥20, WT/OD>5%+15.0/-12.5

A333 Grade 6 Coated Pipe Documentation

  • Raw Material Test Reports
  • Fumigation Certificates
  • Fumigation Certificates
  • Guarantee Letter
  • QAP
  • NABL approved Laboratory Test Reports
  • Heat Treatment Charts

A333 Gr 6 Equivalent Din

DINENBSNFAASTMASME
DIN 17178 Gr FGP 28EN P265NL Gr 10216-4Grade A 42 AP NFA A 36-2051) ASTM A333 Grade 6ASME SA 333 Grade 6UNI C20

A333 Pipe Pressure Rating

A333 Pipe Pressure Rating

A333 Galvanized Pipe Material Marking

  • ASTM A333 Grade 6 Pipes Manufacturer’s name
  • A333 GR 6 Grade and type
  • Monogram marking
  • Heat treatment
  • Impact test temperature
  • End finish of A333 GR 6 Pipes and Tubes
  • Manufacturing process
  • Weight
  • A333 GR 6 Pipes Grade and type
  • A333GR6 material Heat treatment
  • Type of SA 333 GR 6 Pipes thread
  • Impact test temperature
A333 Galvanized Pipe Material Marking

Coating Of Thick Wall Sa333 Pipes

ASTM A333 3LPE Coated Pipes

ASTM A333 3LPE Coated Pipes

A333 GR 6 FBE Coated Pipes

A333 GR 6 FBE Coated Pipes

ASTM A333 GR 6 LE Liquid Epoxy Coated Pipes

ASTM A333 GR 6 LE Liquid Epoxy Coated Pipes

Thin Wall ASTM A333 Pipes Advantage

  • High Strength
  • Resistant High Mechanical Stresses
  • Resistant to High Pressure
  • Resistant to High Temperature
  • Good Formality
  • Reusable