Stainless Steel 310 Pipe

Stainless Steel 310 Pipe

Grade 310 pipe is a low-carbon austenitic stainless steel grade. 310 Stainless Steel Pipe is designed with a superior chemical concentration of 24 to 26% chromium, 19 to 22% of nickel, and 0.75% molybdenum. This gives these pipes enhanced corrosion and oxidation resistance properties across stress-induced setups. A Stainless Steel 310 Pipe can work well in temperatures of above 2000 degrees F. These pipes also have outstanding hardness in cryogenic temperatures up to -450 degrees F. The non-magnetic SS 310 Pipe showcases resistance to hot corrosion and can be machined easily. They can be welded readily in place following standard welding procedures. The versatile 310 Stainless Steel Tube is designed with excellent mechanical properties. These tubes possess a minimum tensile strength of 520mpa with a minimum yield strength of 205mpa. They can be readily elongated by a minimum of 40% and still possess good workability. 310 SS Tubing has a hardness of 225HV max. This tubing exhibits a density of 8.0 kg/m3 with a modulus of elasticity of 200gpa at 20 degrees C.

The pipes in the SS310 grade are commonly designed in seamless and welded configurations. A SS 310 Seamless Pipe is produced by passing hot steel billets through metal and shaping them in correct dimensions. These pipes possess no welds or seams while having outstanding strength and load-bearing capacity in the system. The SS 310 Welded Pipe has a lower-load bearing capacity than a seamless pipe. Designed by welding pieces of sheets or strips in place these pipes are preferred in low-pressure systems. A welded pipe is cheaper to manufacture and purchase than a seamless pipe grade. The grade of ASTM A312 TP310 has good resistance to carburizing environments. The modules in this range can be shaped in different sizes and dimensions to meet specific requirements. Our illustrious institution manufactures the best pipes and tubes in this range which are available at reasonable rates not only in our country but also in the USA and European countries. For any queries or questions contact us for more details.

 

Buy ASTM A312 TP310 Seamless Pipe and 310 Stainless Steel Tube from trusted manufacturers in India, ADNOC certified supplier of Stainless Steel 310 Seamless Pipe in india

Stainless Steel 310 Pipe Supplier

Buy from PED approved ASME SA 312 TP 310 ERW Pipe , Stainless Steel 310 Welded Pipe stockist for quality products & accurate dimensions

Stainless Steel 310 Pipe Specification Chart

Specifications ASTM A 312 ASME SA 312 / ASTM A 358 ASME SA 358
Dimensions ASTM, ASME and API
310 ss pipes Types Seamless, ERW, Welded, 100% X Ray Welded
Size OD (MM) 6.00 to 610.00
Marking
  • Supplier / Manufacturer’s Name or Custom Logo - on request
  • pipes Schedule or Wall Thickness
  • Heat Number
  • Specification
  • Nominal pipes Sizes
  • Grade
  • Manufacturing Method (Welded / Seamless)
Size in NB 1/8″TO 30″NB
length in MM 6000, 3000, 2000, 12000, Or as Required
Wall Thickness 0.5mm to 30mm
Specialized in Large Diameter Size
Surface Finish Mirror, Pickled & Annealed, Polish, 2B, No.4
Value Added Services Polishing, Beveling, Cutting, Threading
Schedule Schedule20, Schedule30, Schedule40, STD, Schedule80, XS, Schedule60, Schedule80, Schedule120, Schedule140, Schedule160, XXS
Form Square Pipes/Tubes, Round Pipes/Tubes, Rectangular pipes/Tubes, “U” Shape, Pan Cake Coils, Coiled Tubes, Hydraulic Tubes
Test Reports & Third party Inspection Mill Test Certificates, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, EN 10204 3.1, Chemical Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packaging Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or Custom packing
Domestic Network Mumbai, Pune, Delhi, Chennai

SS 310 Pipe Sizes

310 Stainless Steel pipes OD
mm
pipes WT
mm
in. Sch Kg/m
13.72 1.65 1/4 10S 0.50
13.72 2.24 1/4 40S 0.64
13.72 3.02 1/4 80S 0.81
17.15 1.65 3/8 10S 0.64
17.15 2.31 3/8 40S 0.86
17.15 3.20 3/8 80S 1.12
21.34 2.11 1/2 10S 1.02
21.34 2.77 1/2 40S 1.29
21.34 3.73 1/2 80S 1.65
26.67 2.11 3/4 10S 1.30
26.67 2.87 3/4 40S 1.71
26.67 3.91 3/4 80S 2.23
33.40 2.77 1 10S 2.13
33.40 3.38 1 40S 2.54
33.40 4.55 1 80S 3.29
33.40 6.352) 1 160 4.30
42.16 2.77 10S 2.73
42.16 3.56 40S 3.44
42.16 4.85 80S 4.53
42.16 6.352) 160 5.69
48.26 2.77 10S 3.16
48.26 3.68 40S 4.11
48.26 5.08 80S 5.49
60.33 2.77 2 10S 3.99
60.33 3.91 2 40S 5.52
60.33 5.54 2 80S 7.60
60.33 8.742) 2 160 11.29
73.03 3.05 10S 5.35
73.03 5.16 40S 8.77
73.03 7.01 80S 11.59
88.90 3.05 3 10S 6.56
88.90 5.49 3 40S 11.47
88.90 7.62 3 80S 15.51
88.90 11.132) 3 160 21.67
101.60 3.05 10S 7.53
101.60 5.74 40S 13.78
101.60 8.08 80S 18.92
114.30 3.05 4 10S 8.50
114.30 6.02 4 40S 16.32
114.30 8.56 4 80S 22.67
114.30 13.492) 4 160 34.05
141.30 6.55 5 40S 22.10
141.30 9.53 5 80S 31.44
141.30 15.882) 5 160 49.87
168.28 3.4 6 10S 14.04
168.28 7.11 6 40S 28.69
168.28 10.97 6 80S 43.21
168.28 14.27 6 120 54.75
168.28 18.262) 6 160 68.59
219.08 8.18 8 40S 43.20
219.08 12.7 8 80S 65.63
219.08 18.23 8 120 91.30
219.08 23.012) 8 160 112.97

Don't forget to compare our quality and price with other TP310S Pipe distributors in India, check Grade 310 stainless steel pipe pressure rating, roughness and outer diameter chart

Roughness of 310S Stainless Steel Pipe

Surface Material Absolute Roughness Coefficient - ε in mm
Stainless steel 0.015

A312 Tp310 EFW Pipe Outer Diameter

NPS WEIGHT (LB/FT) INSIDE DIA (IN) OUTSIDE DIA (IN) WALL THK (IN)
1/8 0.32 lb/ft 0.215" 0.405" 0.095"
1/4 0.54 lb/ft 0.302" 0.540" 0.119"
3/8 0.74 lb/ft 0.423" 0.675" 0.126"
1/2 1.09 lb/ft 0.546" 0.840" 0.147"
3/4 1.47 lb/ft 0.742" 1.050" 0.154"
1 2.17 lb/ft 0.957" 1.315" 0.179"
1-1/4 3.00 lb/ft 1.278" 1.660" 0.191"
1-1/2 3.63 lb/ft 1.500" 1.900" 0.200"
2 5.02 lb/ft 1.939" 2.375" 0.218"
2-1/2 7.66 lb/ft 2.323" 2.875" 0.276"
3 10.25 lb/ft 2.900" 3.500" 0.300"
3-1/2 12.50 lb/ft 3.364" 4.000" 0.318"
4 14.98 lb/ft 3.826" 4.500" 0.337"
5 20.78 lb/ft 4.813" 5.563" 0.375"
6 28.57 lb/ft 5.761" 6.625" 0.432"
8 43.39 lb/ft 7.625" 8.625" 0.500"
10 54.74 lb/ft 9.750" 10.750" 0.500"
12 65.42 lb/ft 11.750" 12.75" 0.500"
14 72.09 lb/ft 13.000" 14.000" 0.500"
16 82.77 lb/ft 15.000" 16.000" 0.500"
18 93.45 lb/ft 17.000" 18.000" 0.500"
20 104.10 lb/ft 19.000" 20.000" 0.500"
24 125.50 lb/ft 23.000" 24.000" 0.500"

ASTM A312 Tp310 Round Pipe Heat Treatment

1000-1150°c followed by rapid quenching

Marking of 310 SS Tubing

  • Material grade
  • Heat Number
  • Size
  • Manufacturer’s name
Stockholder & Exporter of ASTM A 213 TP 310 Tube in Mumbai, check our online inventory, also buy ss 310 seamless pipe and tube at dealer price in India

SS 310 Pipe Price

Description Per Unit (INR)
SEAMLESS STAINLESS STEEL PIPES (HOT FINISHED) GRADE TP310S(SIZE 76.10 X 3.60MM, LENGTH 5.8-6.2MTR) 324
SEAMLESS SS PIPES (HOT FINISHED)GRADE TP310/310S(SIZE 101.60 X 4.00, LENGTH (M) 5.8-6.2) 329
STAINLESS STEEL SEAMLESS (HOT FINISHED) PIPES AS PER ASTM A312 GRADE TP310S SIZE(33.7MM OD X 3.1MM WT X 6M LENGTH) 328
STAINLESS STEEL SEAMLESS PIPES (HOT FINISHED) AS PER ASTM A312 GRADE TP310S SIZE (33.7MM OD X 3.1MM WIDTH X 6 MTR LENGT 328
SEAMLESS SS PIPES (HOT FINISHED)GRADE TP310/310S(SIZE 88.90 X 4.00, LENGTH (M) 5.8-6.2) 309

We provide Multiple Payment Options Of A312 Tp310 Welded Pipes, Contact US Today to Buy 310 Stainless Steel Tube Suppliers In India, Manufacturers Of ASTM A312 Tp310 Erw Pipes In India.

310 Stainless Tube Melting Point

Melting Point (Deg F): 2650

310 stainless steel pipe manufacturer in India, Check SS 310 Pipes Chemical Composition, One Stop Shop For All Stainless Steel 310 Pipes.

SS 310 Pipe Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
Stainless Steel 310 Seamless Pipes
min. 24.0 19.0
max. 0.25 2.0 1.50 0.045 0.030 26.0 22.0
Searching AISI 310 Welded Pipe, astm a 213 tp 310 tube suppliers in India? Importers of stainless steel 310 ERW pipe in desired finish and coating with MTC EN 10204 3.1/ PED 2014/68/EU / ISO 10474/

Charactristics of 310S Stainless Steel Tube

  • Strength and toughness at cryogenic temperatures
  • Moderate strength at high temperature
  • Resistance to hot corrosion
  • Oxidation resistance to 2000°F

310 Stainless Steel Pipe Types

Stainless Steel 310S Pipe

Stainless Steel 310S Pipe

Stainless Steel 310 Tube

Stainless Steel 310 Tube

Grade 310 Stainless Steel Pipes

Grade 310 Stainless Steel Pipes

ASTM A312 TP 310 Seamless Pipes

ASTM A312 TP 310 Seamless Pipes

ASME SA 312 Grade 310 Welded Pipes

ASME SA 312 Grade 310 Welded Pipes

UNS S31000 ERW Pipes

UNS S31000 ERW Pipes

WNR. 1.4841 Round Pipes

WNR. 1.4841 Round Pipes

SA 312 TP 310 Square Pipes

SA 312 TP 310 Square Pipes

ASTM A312 Gr TP 310 Rectangular Pipes

ASTM A312 Gr TP 310 Rectangular Pipes

AISI 310 Schedule 40 Pipes

AISI 310 Schedule 40 Pipes

SS grade 1.4841 Pipes

SS grade 1.4841 Pipes

1.4841 SS 310 Polished Pipes

1.4841 SS 310 Polished Pipes

ASTM A312 TP 310S Seamless Pipes

ASTM A312 TP 310S Seamless Pipes

ASTM A312 TP 310H Welded Pipes

ASTM A312 TP 310H Welded Pipes

SS 310 Pipe

SS 310 Pipe

310S Pipe

310S Pipe

Stainless Steel 310 Pipe

Stainless Steel 310 Pipe

310 SS Tubing

310 SS Tubing

310 Stainless Tube

310 Stainless Tube

310S Stainless Steel Pipe

310S Stainless Steel Pipe

310 Stainless Pipe

310 Stainless Pipe

310 Pipe

310 Pipe

A312 Tp310 Welded Pipes

A312 Tp310 Welded Pipes

ASTM A312 Tp310 Erw Pipe

ASTM A312 Tp310 Erw Pipe

310 Stainless Steel Tube

310 Stainless Steel Tube

SS 310 Seamless Pipe

SS 310 Seamless Pipe

310 Stainless Steel Pipe

310 Stainless Steel Pipe

ASTM A312 A213 A249 Tp310s Stainless Steel Pipes Tubes

ASTM A312 A213 A249 Tp310s Stainless Steel Pipes Tubes

SS310s Tubes Type ASTM A249 Tp310s Stainless Steel Welded Tubes

SS310s Tubes Type ASTM A249 Tp310s Stainless Steel Welded Tubes

SS310s Pipes Type ASTM A312 Tp310s Stainless Steel Welded Pipes

SS310s Pipes Type ASTM A312 Tp310s Stainless Steel Welded Pipes

SS310s Tubes Type ASTM A213 Tp310s Stainless Steel Seamless Tubes

SS310s Tubes Type ASTM A213 Tp310s Stainless Steel Seamless Tubes

SS310s Pipes Type ASTM A312 Tp310s Stainless Steel Seamless Pipes

SS310s Pipes Type ASTM A312 Tp310s Stainless Steel Seamless Pipes

Traders of SS UNS S31008 stainless pipe and alloy 310 stainless steel tube in Mumbai, check Stainless Steel 310 1.4845 Welded Pipe price per meter in India

Suppliers Of 310 Stainless Steel Tube In Mumbai, 310 SS Tubing Mechanical Properties, 310 Stainless Tube Stockist.

Mechanical Properties of DIN 1.4436 Square Pipes

Grade Tensile Strength (MPa) Minimum Yield Strength 0.2% Proof (MPa) Minimum Elongation (% in 50mm) Minimum Hardness
Rockwell B (HR B) Maximum Brinell (HB) Maximum
SS 310 Pipe 515 205 40 95 217

A312 Tp310 Welded Pipe Equivalent

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
310 Stainless Steel pipe S31000/S31008 1.4841/1.4845 SUS 310 – 310S

ASTM A312 Tp310 ERW Pipe Temperature Rating

Temperature Limit (Deg C): 11500C

Creep Properties of 310 Stainless Steel Tube

1% Elongation1) for Rupture2) for
Temperature °C 1,000 h N/mm2 10,000 h N/mm2 1,000 h N/mm2 10,000 h N/mm2 100,000 h N/mm2
600 100 90 170 130 80
700 45 30 80 40 18
800 18 10 35 18 7
900 10 4 15 8.5 3

310 stainless steel pipe suppliers, Huge inventory of 310s Stainless Steel Pipes, 310 Stainless Pipes Manufacturer In India, Check Availability Of 310 Stainless Steel Pipes.

SS 310 Pipes Stockist

Stainless Steel 310 Welded Pipes ASTM A312 TP 310 Coil Tube
UNS S31000 Electropolish Pipes AISI 310 Dairy Tube
AISI 310 Polished Pipes 310 SS Dom Tube
Stainless Steel 310 Decorative Pipes ASTM A312 TP 310 Decorative Tube
AISI 310 Square Pipes ASME SA 312 Grade 310 Exhaust Tube
Stainless Steel 310 Polished Pipes AISI 310 Elliptical Tube
310 SS Rectangular Pipes Stainless Steel 310 Flex Tube
ASME SA 312 Grade 310 exhaust Pipes AISI 310 Fin Tube
AISI 310 schedule 40 Pipes Stainless Steel 310 Fuel Tube
UNS S31000 schedule 10 Pipes AISI 310 Finned Tube Heat Exchangers
Pipes AISI ASME SA 312 Grade 310 Stainless Steel 310 Gas Tube
310 SS flex Pipes AISI 310 Grooved Tube
WNR. 1.4841 grade Pipes 310 SS Hydraulic Tube
Jindal AISI 310 Pipes AISI 310 Heat Exchanger Tube
310 Stainless Steel Seamless Pipes Stainless Steel 310 Square Tube
310 SS Seamless Pipes AISI 310 Seamless Tube
310 Stainless Steel Hollow Pipes ASTM A312 TP 310 Shell And Tube Heat Exchanger
AISI 310 Round Pipes Stainless Steel 310 Rectangular Tube
1.4841 SS 310 Thick Wall Pipes 310 Stainless Steel Tube
SCH40 UNS S31000 Pipes 310 Stainless Steel Tube
AISI 310 Polished Pipes ASTM A312 TP 310 Thick Wall Tube
Stainless Steel 310 Thin Wall Pipes Marine Grade AISI 310 Tube
AISI 310 Welded Pipes WNR. 1.4841 Box Tube
310 Stainless Steel clad Pipes ASTM A312 TP 310 Boiler Tube
Stainless Steel 310 Seamless Pipes WNR. 1.4841 Braided Tube
AISI 310 Pipes 310 Stainless Steel Capillary Tube
UNS S31000 ERW Pipes 310 SS Cylinder Tube
310 Stainless Steel straight Pipes 310 SS Handrail Tube
WNR. 1.4841 threaded Pipes 310 SS Honed Tube
pipe type AISI 310 ASME SA 312 Grade 310 Hydraulic Cylinder Tube
310 Stainless Steel Welded Pipes AISI 310 Hollow Tube
310 SS Pipes 310 Stainless Steel Instrument Tube
ASME SA 312 Grade 310 braided Pipes UNS S31000 Internally Threaded Tube
AISI 310 corrugated Pipes 310 Stainless Steel Large Tube
310 SS conduit Pipes Large Diameter 310 Stainless Steel Tube
AISI 310 dairy Pipes UNS S31000 Mesh Tube
UNS S31000 grooved Pipes ASTM A312 TP 310 Metric Tube
Stainless Steel 310 hydraulic Pipes ASME SA 312 Grade 310 Mechanical Tube
ASTM A312 Gr TP 310 high pressure Pipes SS 310 Micro Tube
SS 310 jacketed Pipes SA 312 TP 310 Needle Tube
1.4841 SS 310 large diameter Pipes SA 312 TP 310 Oval Tube
AISI 310 natural gas Pipes WNR. 1.4841 Octagonal Tube
SS grade 1.4841 oval Pipes 310 Stainless Steel Ornamental Tube
ASTM A312 TP 310 ornamental Pipes JIS AISI 310 Pipes
SS 310 plumbing Pipes AISI 310 Polished Tube
SS grade 1.4841 pipes and tubes SA 312 TP 310 Pitot Tube
SS grade 1.4841 xxs Pipes 1.4841 SS 310 Pipes Tube
310 Stainless Steel Threaded Tube Stainless Steel 310 Rectangular Tube
Stainless Steel 310 Thick Wall Tube SS 310 Round Tube
Stainless Steel 310 Thin Wall Tube 310 SS Round Tube
SS 310 U Shaped Tube UNS S31000 Spiral Tube
310 Stainless Steel Welded Tube 310 SS Structural Tube
SS grade 1.4841 Erw Pipes AISI 310 Seamless Round Tubing
UNS S31000 Welded Tubing 1.4841 SS 310 Square Tube
Polished Stainless Steel 310 Tubing 310 Stainless Steel Hypodermic Tubing
AISI 310 Hydraulic Tubing SS grade 1.4841 Oval Tubing
Schedule 10 Type AISI 310 Pipes Schedule 40 Type UNS S31000 Pipes
AISI 310 Pipes 310 Stainless Steel Perforated Tube

SS 310 Seamless Pipe Testing

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
SS 310 Seamless Pipe Testing