ASTM A403 WP410 Stainless Steel Buttweld Fittings manufacturer and suppliers

ASTM A403 WP410 Stainless Steel Buttweld Fittings, SS410 Elbow, wp410 Elbow, SS 410 Tee, SS 410 reducers manufacturer & supplier In India

Manufacturer, Supplier and Exporter of ASTM A403 WP410 Stainless Steel Buttweld Fittings in India

SS Grades: WP304WP 304LWP 304HWP 304LNWP 304NWP316WP 316LWP 316HWP317WP 317LWP321WP 321HWP347WP 347HWPS 31254

Contents:

ASTM A403 WP410 Stainless Steel Buttweld Fittings

Since 2004, L.G. Pipes and Tubes has manufactured ASTM A403 WP410 Stainless Steel Buttweld Fittings, flange, elbow, tee, reduction, caps, forged fitting materials for oil and natural gas pipelines, refinery and petro chemistry facilities, nuclear power and electricity production plants, refinement and extrication plants, dams and hydroelectric power plants and shipbuilding industry. L.G. Pipes and Tubes prides itself on producing only quality products. From the smallest elbow fitting to the largest flange, you can be assured that the product you are receiving is quality because the L.G. Pipes and Tubes name goes on with every product we manufacture.

L.G. Pipes and Tubes is among the leading companies in the sector of manufacturing ASTM A403 WP410 Stainless Steel Buttweld Fittings, pipe fittings & flanges with its superior technology in compatible with the world standards, and has been the choice of many professionals and companies. We are specialized in ASTM B366 Inconel 600 ® Nickelvac 600 ®, Ferrochronin 600, Inconel 625® Fittings, Chronin® 625, Altemp® 625, Haynes® 625, Nickelvac® 625, Nicrofer® 6020 Fittings, Monel 400 ® , Nickelvac ® 400, Nicorros® 400 Fittings, Hastelloy C276®, Nickelvac® HC-276, Inconel® C276, Nicrofer® 5716 Pipe Fittings.

We offer wide gamut of ASTM A403 WP410 Stainless Steel Buttweld Fittings that are widely used in diverse industries. Fittings and flanges of SS 304 / 304L are made available on request of the customers. Can be made available in forms of Reducers – Concentric / Eccentric, Elbows, Tees, Caps, Stub Ends, Flanges, Fasteners, etc. Our gamut of products conform various standards such as the varied grades of stainless steel butt weld fittings that we supply are.

Standard: ASTM / ASME A/SA 403 GR WP "S" / "W" / " WX"
Grade: 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. .

ASTM A403 WP410 Stainless Steel Buttweld Fittings Dimensional Range & Standard Specification

Specification:

Standards Designation Specification
ASTM A 403 ANSI B16.9
ASME SA 403

Origin: West Europe / Japan / Indian / USA / Korean

BW fittings manufacturing range

Range    
from ½” to 16” – from sch. 10s to sch. XXS
     
Grades    
Stainless steel fittings ASTM/ASME A/SA 403 WP 304/304L, WP 316/316L, WP 321/321H, WP 304H, WP 347/347H, WP 316H, WP 310S, WP 317L, WP 316L UG (UNS S31603), WP 25.22.2 (UNS S31050)
Duplex fittings
Superduplex fittings
ASTM/ASME A/SA 815
ASTM/ASME A/SA 815
UNS S31803/S32205
UNS S32760 & UNS S32750
Ssuperaustenitics fittings ASTM/ASME B/SB 366
ASTM/ASME A/SA 403
UNS N08904 (904L)
UNS S31254 (6Mo)
Nickel alloys fittings ASTM/ASME B/SB 366 ALLOY 200, 201, 400, 600, 625, 800/H/T, 825, 276,
UNS N08925, UNS N08020, amongst others


Test Certificates: 
Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

ASTM A403 WP410 Stainless Steel Buttweld Fittings Welded (ERW) Buttweld Fittings

ASTM/ASME | A403/SA403 | WP-W | ANSI B16.9/MSS SP-43

GRADE SCHEDULE NOM. PIPE SIZE
WP 410-W SCH 10S 1/2" – 24"
  SCH 40S 1/2" – 12"
     
WP 410-W SCH 10S 1/2" – 24"
  SCH 40S 1/2" – 12"

ASTM A403 WP410 Stainless Steel Buttweld Fittings Seamless Fittings

ASTM/ASME | A403/SA403 | WP-S | ANSI B16.9/MSS SP-43

NACE MR 01-75 | ASTM A262E | PMI TESTED

CERTIFICATE EN 10204/3.1B
GRADE SCHEDULE NOM. PIPE SIZE
WP 410-S SCH 10S 1/2" – 12"
  SCH 40S 1/2" – 12"
  SCH 80S 1/2" – 12"
     
WP 410-S SCH 10S 1/2" – 12"
  SCH 40S 1/2" – 12"
  SCH 80S 1/2" – 12"

Type of ASTM A403 WP410 Stainless Steel Buttweld Fittings we manufacture:

Manufacturer of
Size
ASTM A403 WP410 stainless steel 90° Elbow
ASTM A403 WP410 stainless steel 45° Elbow
ASTM A403 WP410 stainless steel Long Radius Elbow
ASTM A403 WP410 stainless steel Short Radius Elbow
ASTM A403 WP410 stainless steel Reducing Elbow
ASTM A403 WP410 stainless steel 3D Elbow
ASTM A403 WP410 stainless steel 5D Elbow
ASTM A403 WP410 stainless steel Tee (Equal & Unequal)
ASTM A403 WP410 stainless steel Fabricated Tee
ASTM A403 WP410 stainless steel Cross
ASTM A403 WP410 stainless steel Reducing Crosses
ASTM A403 WP410 stainless steel Full Coupling
ASTM A403 WP410 stainless steel Half Coupling
ASTM A403 WP410 stainless steel Pipe Cap
ASTM A403 WP410 stainless steel Union
ASTM A403 WP410 stainless steel Stub Ends (Long & Short)
ASTM A403 WP410 stainless steel 180° LR Return Bends
ASTM A403 WP410 stainless steel 180° SR Return Bends
ASTM A403 WP410 stainless steel Pipe Bends / Piggable Bends
ASTM A403 WP410 stainless steel Couplings
ASTM A403 WP410 stainless steel Pipe Nipples (Barrel)
ASTM A403 WP410 stainless steel Forged/ Plate Cut Rings
ASTM A403 WP410 stainless steel End Caps
ASTM A403 WP410 stainless steel Forged / Plate Circles
ASTM A403 WP410 stainless steel Reducer Insert
ASTM A403 WP410 stainless steel Reducers
ASTM A403 WP410 stainless steel Concentric Reducer
ASTM A403 WP410 stainless steel Eccentric Reducer
ASTM A403 WP410 stainless steel Boss
ASTM A403 WP410 stainless steel Branch Outlet
ASTM A403 WP410 stainless steel 90° Elbow Outlet
ASTM A403 WP410 stainless steel 45° Lateral Tee
ASTM A403 WP410 stainless steel Lateral Outlet
ASTM A403 WP410 stainless steel Branch Outlet Buttweld
ASTM A403 WP410 stainless steel 90° Elbow Outlet Buttweld
ASTM A403 WP410 stainless steel Lateral Outlet Buttweld
ASTM A403 WP410 stainless steel Nipple Branch Outlet Buttweld
ASTM A403 WP410 stainless steel Dairy Fitting
Sizes 1/2" – 48"

Test Certificate
With Manufacturer Test Certificate 
Under Third Party Inspection

PRESSURE CLASS
3000 – 6000 – 9000LB

We are specialized in:

  1. Flanges according to ASTM A182 Grade F304, F304L F316L
  2. Pipes according to ASTM A312 Grade TP304, TP304L, TP3016L
  3. Fittings according to ASTM A403 Grade WP304, WP304L, WP316L

ASTM A403 WP410 Stainless Steel Buttweld Fittings price

Click here for stainless steel pipe price list (updated price list)

ASTM A312 TP 310 Stainless Steel Welded Pipe at Factory price

[button type=”normal” target=”_self” link=”http://www.lgpipeindia.com/enquiry.html” color=”#249cd9″ bordercolor=”#0467ba” size=”default” icon=”moon-pencil” icon_color=”#fffff” fontcolor=”#fffff”]Send Inquiry[/button]  

Useful Information:

Grade 410 is the basic martensitic stainless steel; like most non-stainless steels it can be hardened by a "quench-and-temper" heat treatment. It contains a minimum of 11.5 per cent chromium, just sufficient to give corrosion resistance properties. It achieves maximum corrosion resistance when it has been hardened and tempered and then polished. Grade 410 is a general purpose grade often supplied in the hardened, but still machinable condition, for applications where high strength and moderate heat and corrosion resistance are required.

Martensitic stainless steels are optimised for high hardness, and other properties are to some degree compromised. Fabrication must be by methods that allow for poor weldability and usually the need for a final heat treatment. Corrosion resistance of the martensitic grades is lower than that of the common austenitic grades, and their useful operating temperature range is limited by their loss of ductility at sub-zero temperatures and loss of strength by over-tempering at elevated temperatures.

SS 410 PIPE
STANDARDS SEAMLESS
ASTM A 312
ASME SA 312

Composition of 410 Stainless Steel Pipes and Tubes
Typical compositional ranges for grade 410 stainless steels are given in table 1.

Table 1. Composition ranges for 410 grade stainless steel

Grade C Mn Si P S Cr Mo Ni N
410 min.
max.

0.15

1.00

1.00

0.040

0.030
11.5
13.5
0.75

Mechanical Properties of 410 Stainless Steel Pipes and Tubes
Typical mechanical properties for grade 410 stainless steels are given in table 2.

Table 2. Mechanical properties of 410 grade stainless steel

Tempering Temperature (0C) Tensile Strength (MPa) Yield Strength 0.2% Proof (MPa) Elongation (% in 50mm) Hardness Brinell (HB) Impact Charpy V (J)
Annealed * 480 min 275 min 16 min
204 1310 1000 16 388 30
316 1240 960 14 325 36
427 1405 950 16 401 #
538 985 730 16 321 #
593 870 675 20 255 39
650 755 575 23 225 80
* Annealed properties are specified for Condition A of ASTM A276, for cold finished bar.
# Due to associated low impact resistance this steel should not be tempered in the range 425-6000C

Physical Properties of 410 Stainless Steel Pipes and Tubes
Typical physical properties for annealed grade 410 stainless steels are given in table 3.

Table 3. Physical properties of 410 grade stainless steel in the annealed condition

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion
(m/m/0C)
Thermal Conductivity
(W/m.K)
Specific Heat 0-1000C
(J/kg.K)
Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
410 7750 200 9.9 11.4 11.6 24.9 28.7 460 570

Grade Specification Comparison of 410 Stainless Steel Pipes and Tubes
Approximate grade comparisons for 410 stainless steels are given in table 4.

Table 4. Grade specifications for 410 grade stainless steel 

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410
These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Corrosion Resistance of 410 Stainless Steel Pipes and Tubes
410 resists dry atmosphere, fresh water, mild alkalies and acids, food, steam and hot gases. Must be hardened for maximum heat and corrosion resistance. Performance is best with a smooth surface finish. Less corrosion resistant than the austenitic grades and also less than 17% chromium ferritic alloys such as Grade 430.

Cities We Deliver To: Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwad, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Tehran, Calgary, Noida, Riyadh, Vadodara, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Thane, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, Surat, Bhopal, Ulsan, Faridabad, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo

Countries We Deliver To: India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia

Europe: Germany, Netherland, Russia Finland, Czech, Ukraine, Italy, Spain, Poland
Middle East:Iran, UAE, SA, Iraq, Qatar, Isreal, Jordan, Bahrain, Kuwait
South America:Brazil, Chile, Peru, Venezuela, Uruguay, Argentina
Africa: Egypt, South Africa, Nigeria
Central & North America:Mexico, US, Canada, Costa Rica
South East Asia and Pacific:Japan, South Korea, Singapore, Thailand, Indonesia, Australia

ASTM A403 WP410 Stainless Steel Buttweld Fittings other brand manufacturers

ASTM A403 WP410 Stainless Steel Buttweld Fittings manufacturers

  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | Erne Fittings, Austria
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | Metalfar, Italy
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | Lame S.r.l., Italy
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | BKL- Thai Benkan, Thailand
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | BENKAN Corporation, Japan
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | TecnoForge, Italy
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | Ulma, Spain
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | Mega, Italy
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | Melesi, Italy
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | Interfit, France
  • ASTM A403 WP410 Stainless Steel Buttweld Fittings | Raccortubi S.p.A., Italy

Tags: ASTM A403 WP410 Stainless Steel Buttweld Fittings, best quality ASTM A403 WP410 Stainless Steel Buttweld Fittings, wide variety of ASTM A403 WP410 Stainless Steel Buttweld Fittings, ASTM A403 WP410 Stainless Steel Buttweld Fittings India, ASTM A403 WP410 Stainless Steel Buttweld Fittings distributor Mumbai, ASTM A403 WP410 Stainless Steel Buttweld Fittings traders, prime quality ASTM A403 WP410 Stainless Steel Buttweld Fittings, ASTM A403 WP410 Stainless Steel Buttweld Fittings exporter, Source for ASTM A403 WP410 Stainless Steel Buttweld Fittings, specialize in ASTM A403 WP410 Stainless Steel Buttweld Fittings, ASTM A403 WP410 Stainless Steel Buttweld Fittings with Test Certificate, ASTM A403 WP410 Stainless Steel Buttweld Fittings manufacturers, ASTM A403 WP410 Stainless Steel Buttweld Fittings suppliers, ASTM A403 WP410 Stainless Steel Buttweld Fittings dealers, ASTM A403 WP410 Stainless Steel Buttweld Fittings mill, ASTM A403 WP410 Stainless Steel Buttweld Fittings price, ASTM A403 WP410 Stainless Steel Buttweld Fittings ready stock, used ASTM A403 WP410 Stainless Steel Buttweld Fittings, ASTM A403 WP410 Stainless Steel Buttweld Fittings manufacturing process, send your ASTM A403 WP410 Stainless Steel Buttweld Fittings requirement to our Mumbai, India office by email lgpipe@gmail.com, ISO 9001, ISO 14001, OHSAS 18001 certified & Government Recognized Export House