Sandvik Incoloy 825 Welded Pipe manufacturer and suppliers

Sandvik alloy 825 Tubes, Sandvik alloy 825 Fittings, Sandvik alloy 825 Rods, Sandvik alloy 825 Fasteners, Sandvik alloy 825 plate, Sandvik alloy 825 sheet, Sandvik alloy 825 strip

Stockholder, Suppliers and Exporter of Sandvik Incoloy 825 Welded Pipe, Sandvik Sanicro 28, Sandvik Sanicro 60, Sandvik Sanicro 31HT, Sandvik Sanicro 41, Sandvik Sanicro 61, Sandvik Sanicro 70, Sandvik Sanicro 31H Inconel Pipe in India

Nickel Grades: UNS N04400UNS N06600UNS N06625UNS N08020UNS N08800UNS N08810UNS N08811UNS N08825UNS N10276UNS S31254

Contents:

Sandvik Logo

Sandvik Incoloy 825 Welded Pipe

L.G. Pipes and Tubes maintains one of the world’s largest Sandvik Incoloy 825 Welded Pipe inventories, pipe & tubes inventories include Sandvik welded pipe, Sandvik tubing, Sandvik plate, Sandvik sheet, Sandvik strip, stainless steels pipe, Sandvik Sanicro 28, Sandvik Sanicro 60, Sandvik Sanicro 31HT, Sandvik Sanicro 41, Sandvik Sanicro 61, Sandvik Sanicro 70, Sandvik Sanicro 31H, duplex, super duplex, nickel & mixed alloys, carbon steels and low alloys pipes & tubes for energy and industrial applications.

The environment management system of the company is certified according to the requirements of ISO 9001:2008, 14001, 18001 & PED. Few of the major brands we represent are Arcelor Mittal, Sumitomo, Tenaris, Benteler, Jazeera Steel, Hyundai HYSCO, Arabian Pipes Company, Sandvik, Froch, etc. Our materials are approved by Saudi ARAMCO, SABIC, SHELL, ADNOC, GASCO, PDO, KNPC, KOC, QATAR Gas, SGC etc.

L.G. Pipes and Tubes offers a wide range of Sandvik Incoloy 825 Welded Pipe, 316 Seamless Tubing316 Seamless Pipess 316l Seamless Pipe304 Seamless Tube304 Seamless Stainless Steel Tubing & Hydraulic Tube etc. We can meet most ASME, ASTM, AMS, and military specifications, and can cross-reference to most international standards, including full DIN 3.1b, full 3.1/3.2 Certifcation and NACE requirements.

Sandvik Incoloy 825 Welded Pipe Dimensional Range & Standard Specification

Looking for a Sandvik Incoloy 825 Welded Pipe supplier that offers quality products with fast turn around times at competitive prices? If so, you’ve come to the right place. Our products, including Nickel 600 and Alloys 625, 718, welded stainless steel and X750 are stored and pulled directly from warehouses. We stock and sell Sandvik Incoloy 825 Welded Pipe, this alloy is also available in form of Flat Bar, Forging Stock, Hexagon, Plate, Round Bar, Sheet, Strip and Wire. All the alloys are high temperature/corrosion resistant alloys that are often used in the aerospace industry.

Sandvik Incoloy 825 Welded Pipe
Sr. No.
Material
Size
Sch.
Specification
1
Sandvik Incoloy 825 Welded Pipe

15 NB
to
150 NB

Sch. 10
Sch. 40
Sch. 80 Etc.
IS
BS
ASTM
UNS

Trade Name Sandvik Incoloy 825 Welded Pipe
In Form of Round etc.
In Length of  Standard & Cut length
Value Added Service Draw & Expansion as per required Size & Length
Bending 
Annealed & Pickled 
Machining Etc. 
Test Certificate  Manufacturer Test Certificate 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection .
Specialize  Cupro Nickel Tube

Sandvik Incoloy 825 Welded Pipe sizes & stock

PIPE TUBE TYPE NB SIZES SCH 5 SCH 10 SCH 40 SCH 80 SCH 160
Sandvik Incoloy 825 Welded Pipe
1/8"
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
1/4"
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
3/8"
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
1/2"
available size
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
3/4"
available size
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
1"
available size
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
1 1/4"
available size
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
1 1/2"
available size
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
2"
available size
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
2 1/2"
available size
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
3"
available size
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
4"
available size
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
5"
available size
available size
available size
available size
Sandvik Incoloy 825 Welded Pipe
6"
available size
available size
available size
available size

All materials supplied by L.G. Pipes and Tubes will meet or exceed ASTM, ASME, ANSI and/or API standards, per your required specifications including full documentation.
We have more than 1200 tons of Sandvik Incoloy 825 Welded Pipe in ready stock for immediate dispatch in our stockyard. Also we provide value addition to the client in the form of cut to length size, slitting, shaping, and fabrication, superior finishing, marking, beveled end, specialized cap protection.

We are specialized in:

  1. Flanges according to ASTM A182 Grade F304, F304L F316L
  2. Pipes according to ASTM A312 Grade TP304, TP304L, TP3016L
  3. Fittings according to ASTM A403 Grade WP304, WP304L, WP316L

Hot Products: Type 304 | Type 304L | Type 304H | Type 316 | Type 316L | Type 316H | Type 317L | Type 321 | Type 347 | Type 410 | Type 904L | UNS S32750 Duplex | UNS S32205 Duplex | UNS S31803 Duplex

Advantages of Sandvik Incoloy 825 Welded Pipe

  • Welded pipes are typically more cost effective than their seamless equivalents.
  • Welded pipes are usually more readily available than seamless. The longer lead time required for seamless pipes can not only make timing problematic, but it also allows more time for the price of the materials to fluctuate.
  • The wall thickness of welded pipes is generally more consistent than that of seamless pipes.
  • The internal surface of welded tubes can be checked before manufacturing, which isn’t possible with seamless.

Sanicro 41 (Tube and pipe, seamless)

Datasheet updated 2015-02-16 10:39:37 (supersedes all previous editions)

Sanicro 41 is a nickel alloy characterized by the following properties:

  • Very good resistance to stress corosion cracking (SCC) in chloride and sour (H2S/Cl-) environments
  • very good resistance to corrosion resistance in acidic media such as sulphuric acid
  • Much better resistance to pitting and crevice corrosion than steels of the ASTM 316 type
  • Good weldability

Standards

  • ASTM Alloy 825
  • UNS N08825
  • W.Nr. 2.4858
  • DIN NiCr 21 Mo

Product standards
Seamless tube and pipe, seamless heat exchanger tubes.
ASTM B163, ASTM B423

Sandvik ANSI/ASME pipe, Sandvik Bimetallic tubes, Sandvik Boiler tubes, Sandvik Capillary tubes, Sandvik Chemical injection lines, Sandvik Coiled tubing, Sandvik Composite tubes, Sandvik Condenser tubes, Sandvik Control lines, Sandvik Downhole casing, Sandvik Ethylene furnace tubes, Sandvik Evaporator tubes, Sandvik Finned tubes, Sandvik Fittings, Sandvik Flanges, Sandvik Flowline piping, Sandvik Furnace tubes, Sandvik Gasoline direct injection (GDI) tubes, Sandvik Heat exchanger tubes, Sandvik High-pressure tubes, Sandvik High-temperature tubes, Sandvik Hollow bar, Sandvik Hydraulic tubing, Sandvik Instrumentation tubing, Sandvik ISO/EN tubes, Sandvik Lance tubes, Sandvik Mechanical tubing, Sandvik Medical tubes, Sandvik Muffle tubes, Sandvik Nuclear fuel tubes, Sandvik Nuclear steam generator tubing, Sandvik Precision tubes, Sandvik Production tubing (OCTG), Sandvik Recuperator tubes, Sandvik Reheater tubes, Sandvik Riser tubes, Sandvik Scrubber tubes, Sandvik Steam generator tubes, Sandvik Stripper tubes, Sandvik Subsea tubes, Sandvik Superheater tubes, Sandvik Thermocouple tubes, Sandvik Titanium tubes, Sandvik Umbilical tubes, Sandvik Zirconium tubes

Duplex stainless steels

Sandvik grade UNS ASTM EN no. W.-nr AFNOR
Sandvik 3RE60 S31500 1.4424 1.4417 Z2CND18-05-03
Sandvik SAF 2205 S31803/S32205 1.4462 Z2CND22-05-03
Sandvik SAF 2304 S32304 1.4362 1.4362 Z2NC23-04AZ
Sandvik SAF 2707 HD S32707
Sandvik SAF 2507 S32750 1.4410

Sandvik High-alloy austenitic stainless steels and nickel alloys

Sandvik grade UNS ASTM EN steel no. W.-nr AFNOR
Sanicro 70 N06600 Alloy 600 2.4816
Sanicro 69 N06690 Alloy 690 2.4642*** 2.4642 NC30FE(RCCM)
Sanicro 41 N08825 Alloy 825 2.4858
Sanicro 30 N08800 1.4558 1.4558
Sanicro 28 N08028 1.4563 1.4563
Sandvik 2RK65 N08904 1.4539 1.4539 Z1NCDU25-20-4
254 SMO* S31254 1.4547 (1.4529)**

* 254 SMO is a trademark of Outokumpu OY.
** In brackets, nearest equivalent steel grade
*** Not applicable for tube and pipe. Only for information.

Sandvik Austenitic stainless steels

Sandvik grade UNS ASTM EN steel no. W.-nr AFNOR
Sandvik 3R12 S30403/S30400 304L/304 1.4306/1.4301 1.4306/1.4301 Z2CN18-10
Sandvik 3R60 S31603/S31600 316L/316 1.4435/1.4436 1.4435/1.4436 Z2CND17-13
Sandvik 5R75 S31635 316Ti 1.4571 1.4571 (Z6CNDT17-12)**
Sandvik 6R35 S32100/S32109 321/321H 1.4541/1.4940 1.4541/1.4878 (Z6CNT18-10)**

Sandvik Incoloy 825 Welded Pipe price

Click here for stainless steel pipe price list (updated price list)

inconel المورد/ شراء 625 inconel الأنابيب
US $ 25-60 / كيلوغرام

inconel 625 سلس الأنابيب المورد
US $ 10-30 / كيلوغرام

inconel 625 الأنابيب الملحومة المورد
US $ 10-30 / كيلوغرام

ASTM A312 TP 310 Stainless Steel Welded Pipe at Factory price

[button type=”normal” target=”_self” link=”http://www.lgpipeindia.com/enquiry.html” color=”#249cd9″ bordercolor=”#0467ba” size=”default” icon=”moon-pencil” icon_color=”#fffff” fontcolor=”#fffff”]Send Inquiry[/button]

Useful Information:

Chemical composition (nominal) %

C Si Mn P S Cr Ni Mo Ti Cu
≤0.030 ≤0.5 0.8 ≤0.025 ≤0.010 20 38.5 2.6 0.7 1.7

Forms of supply

Seamless tube and pipe- finishes and dimensions

Heat exchanger tubing, straight or bent to specification, with or without heat treatment of bends, can be supplied.

Seamless tube and pipe in Sanicro 41 can be supplied in dimensions up to 260 mm (10") outside diameter. The delivery condition is solution annealed and either white pickled or bright annealed.

Materials for oil and gas production

Cold worked seamless tube and pipe:
For production tubing and casing in oil and gas production, Sanicro 41 is supplied cold worked with high strength properties (Sanicro 41-110).

Size range:
Outside diameter: 2 3/8" – 7" (60.33-177.8 mm)
Wall thickness: 0.190"-0.590" (4.83-14.99 mm)

Mechanical properties

At 20oC
Metric units

Condition Proof strength Tensile strength Elongation Hardness
Rp0.21) Rm A2" HRB
MPa MPa %
Cold finished ≥241 ≥586 ≥30 ≤90
Hot finished ≥172 ≥517 ≥30 ≤90

At 68oF
Imperial units

Condition Proof strength Tensile strength Elongation Hardness
Rp0.21) Rm A2" HRB
ksi ksi %
Cold finished ≥35 ≥86 ≥30 ≤90
Hot finished ≥25 ≥75 ≥30 ≤90

1) Corresponds to 0.2% offset yield strength
At high temperatures
The alloy, UNS N08825, is approved under ASME Pressure Vessel Code, div. 1, Section VIII for use up to 538oC (1000oF).

Metric units

Temperature
Proof strength
Rp0.2
oC
MPa
min
100
220
150 210
200
201
250 193
300
186
350 181
400
177
450 175
500
174
525 172

Imperial units

Temperature
Proof strength
Rp0.2
oF
ksi
min
210
31.9
300 30.5
390
29.2
480 28.0
570
27.0
660 26.3
750
25.7
840 25.4
930
25.2
975 24.9

Physical properties

Density: 8.1 g/cm3, 0.30 lb/in3

Metric units, Imperial units

Temperature, °C W/(kg oC) Temperature, °F Btu/(ft h oF)
Thermal conductivity
20 11 68 6
Temperature, °C J/(kg °C) Temperature, °F Btu/(lb °F)
Specific heat capacity
20 440 68 0.11
Temperature, °C Per °C Temperature, °F Per °F
Thermal expansion 1)
30-100 14.2 86-200 7.9
30-200 14.6 86-400 8.1
30-300 14.9 86-600 8.3
30-400 15.1 86-800 8.4
30-500 15.3 86-1000 8.5

1) Mean values in temperature ranges (x10-6)

Corrosion resistance

General corrosion

Sanicro 41 possesses excellent resistance to corrosion. The material is far superior to molybdenum alloyed steels such as AISI 316L, particularly when exposed to non-oxidizing media such as sulphuric acid or phosphoric acid. It also has satisfactory resistance to highly oxidizing agents such as nitric acid. Sanicro 41 has significantly better corrosion resistance in formic acid than standard austenitic stainless steels.

The results of corrosion tests in nitric acid are tabulated below. Resistance to sulphuric acid is illustrated in Figure 1. It should be noted that the corrosiveness of sulphuric acid depends on the oxygen content. Sulphuric acid in contact with air is, therefore, more corrosive than deaerated acid.

Table 1. General corrosion resistance of Sanicro 41 in nitric acid.

Concentration
Temperature
Nitric acid
(Boiling solution)
Sanicro 41
AISI 316L
wt % oC oF mm/year mpy mm/year mpy
50 115 240 0.04 1.6 0.12 4.8
65 118 245 0.11 4 0.3 12

Pitting and crevice corrosion

Corrosion tests carried out in sodium chloride solutions indicate that the resistance of Sanicro 41 to pitting and crevice corrosion is superior to that of AISI 316- a result of the higher chromium and molybdenum contents of the material. Critical pitting temperatures (CPT) for the two grades in 3% sodium chloride solutions at different pH values are plotted in Figure 2.

Intergranular corrosion

Even in the heaviest sizes, Sanicro 41 can be welded without the risk of carbide precipitation causing intergranular corrosion. This is due, in part, to the low carbon content of the material, but also to the fact that it is titanium stabilized.

Heat treatment

Tubes are delivered in the heat treated condition. If additional heat treatment is needed due to further processing, the following is recommended.

Solution annealing
1000-1100 oC (1830-2010 oF), 5-10 minutes, rapid cooling in air or water.

Welding

Sanicro 41 has good weldability. Suitable methods of fusion welding are manual metal-arc welding, MMA, tungsten inert gas welding,TIG, and metal inert gas welding, MIG. Preheating and post-weld heat treatment are not normally necessary.

The standard of cleanliness required, when welding fully austenitic stainless steels, is particularly demanding. Joint surfaces and filler metals must be free from grease, paint and other contaminants. The weld zone should be cleaned, as required, using a suitable solvent such as acetone or alcohol.

Sanicro 41, like other austenitic materials, has a high coefficient of thermal expansion. Welding should, therefore, be carried out with low heat input, using well-prepared welding procedures to control distortion of the welded construction.

Since fully austenitic materials are sensitive to hot cracking, welding should be carried out using the lowest practical heat input, <1.0kJ/mm and an interpass temperature of < 100°C (212ºF).

The recommended filler metal for TIG and MIG welding is Sandvik 27.31.4.LCu. For both TIG and MIG/MAG welding, pure argon should be used as the shielding gas. For MIG/MAG welding, pulsed current is suggested. For manual metal-arc welding MMA, Sandvik 27.31.4.LCuR is recommended.

Bending

The excellent formability of Sanicro 41 enables the material to be cold bent to extremely small radii. Annealing after bending is not normally necessary.

Applications

Sanicro 41 is particularly suited for use in heat exchangers for crude oil and oil refineries, especially where high concentrations of hydrogen sulphide and chloride are present.

We are exporting Sandvik Incoloy 825 Welded Pipe to more than 40 countries like UAE, EGYPT, TURKEY, Singapore, Malaysia, Iran, Iraq, Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait, Argentina, Palestin, Algeria, Italy, Tunisia, Oman, Mauritania, USA, Bangladesh, Lebanon, Canada, Vietnam, India, Sudan, Syria, Morocco, Libya, Jordon, and many more..

We also have our sales representatives to understand the requirements of our clients, we maintain ready stock of Sandvik Incoloy 825 Welded Pipe in cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sana’a, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more..

Our worldwide presence:

Cities We Deliver To: Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwad, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Tehran, Calgary, Noida, Riyadh, Vadodara, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Thane, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, Surat, Bhopal, Ulsan, Faridabad, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo

Countries We Deliver To: India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia

Europe: Germany, Netherland, Russia Finland, Czech, Ukraine, Italy, Spain, Poland
Middle East:Iran, UAE, SA, Iraq, Qatar, Isreal, Jordan, Bahrain, Kuwait
South America:Brazil, Chile, Peru, Venezuela, Uruguay, Argentina
Africa: Egypt, South Africa, Nigeria
Central & North America:Mexico, US, Canada, Costa Rica
South East Asia and Pacific:Japan, South Korea, Singapore, Thailand, Indonesia, Australia

other brand manufacturer’s pipe & tubes also available

stainless steel pipe manufacturers

 

L.G. Pipes and Tubes Logo
L.G. Pipes and Tubes
Address:
204, Balaram Steet, Shop No.5, Balaram Bhuvan
Grant Road (E),Mumbai-400007, Maharashtra, India.
Tel: +91-22-66518819, 67437819
Email: lgpipe@gmail.com
Website: www.lgpipeindia.com
Fax: +91-22-23014879

Tags: Sandvik Incoloy 825 Welded Pipe, best quality Sandvik Incoloy 825 Welded Pipe, wide variety of Sandvik Incoloy 825 Welded Pipe, Sandvik Incoloy 825 Welded Pipe India, Sandvik Incoloy 825 Welded Pipe distributor Mumbai, Sandvik Incoloy 825 Welded Pipe traders, prime quality Sandvik Incoloy 825 Welded Pipe, Sandvik Incoloy 825 Welded Pipe exporter, Source for Sandvik Incoloy 825 Welded Pipe, specialize in Sandvik Incoloy 825 Welded Pipe, Sandvik Incoloy 825 Welded Pipe with Test Certificate, Sandvik Incoloy 825 Welded Pipe manufacturers, Sandvik Incoloy 825 Welded Pipe suppliers, Sandvik Incoloy 825 Welded Pipe importer, Sandvik Incoloy 825 Welded Pipe exporter, Sandvik Incoloy 825 Welded Pipe dealers, Sandvik Incoloy 825 Welded Pipe mill, Sandvik Incoloy 825 Welded Pipe price, Sandvik Incoloy 825 Welded Pipe ready stock, used Sandvik Incoloy 825 Welded Pipe, Sandvik Incoloy 825 Welded Pipe manufacturing process, Brand Steel Pipes stockist, send your Sandvik Incoloy 825 Welded Pipe requirement to our Mumbai, India office by email lgpipe@gmail.com, ISO 9001:2008, Seamless Pipes and Tubes for the Chemical Industry (Stainless Steel and Ni-based Alloys), Sandvik Sanicro 28, Sandvik Sanicro 60, Sandvik Sanicro 31HT, Sandvik Sanicro 41, Sandvik Sanicro 61, Sandvik Sanicro 70, Sandvik Sanicro 31H