Sandvik Inconel 600 Seamless Tube manufacturer and suppliers

Sandvik alloy 600 Tubes, Sandvik alloy 600 Fittings, Sandvik alloy 600 Rods, Sandvik alloy 600 Fasteners, Sandvik alloy 600 plate, Sandvik alloy 600 sheet, Sandvik alloy 600 strip

Stockholder, Suppliers and Exporter of Sandvik Inconel 600 Seamless Tube, Sandvik Sanicro 28, Sandvik Sanicro 60, Sandvik Sanicro 31HT, Sandvik Sanicro 41, Sandvik Sanicro 61, Sandvik Sanicro 70, Sandvik Sanicro 31H Inconel Pipe in India

Nickel Grades: UNS N04400UNS N06600UNS N06625UNS N08020UNS N08800UNS N08810UNS N08811UNS N08825UNS N10276UNS S31254

Contents:

Sandvik Logo

Sandvik Inconel 600 Seamless Tube

L.G. Pipes and Tubes maintains one of the world’s largest Sandvik Inconel 600 Seamless Tube inventories, pipe & tubes inventories include Sandvik welded pipe, Sandvik tubing, Sandvik plate, Sandvik sheet, Sandvik strip, stainless steels pipe, Sandvik Sanicro 28, Sandvik Sanicro 60, Sandvik Sanicro 31HT, Sandvik Sanicro 41, Sandvik Sanicro 61, Sandvik Sanicro 70, Sandvik Sanicro 31H, duplex, super duplex, nickel & mixed alloys, carbon steels and low alloys pipes & tubes for energy and industrial applications.

The environment management system of the company is certified according to the requirements of ISO 9001:2008, 14001, 18001 & PED. Few of the major brands we represent are Arcelor Mittal, Sumitomo, Tenaris, Benteler, Jazeera Steel, Hyundai HYSCO, Arabian Pipes Company, Sandvik, Froch, etc. Our materials are approved by Saudi ARAMCO, SABIC, SHELL, ADNOC, GASCO, PDO, KNPC, KOC, QATAR Gas, SGC etc.

L.G. Pipes and Tubes offers a wide range of Sandvik Inconel 600 Seamless Tube, 316 Seamless Tubing316 Seamless Pipess 316l Seamless Pipe304 Seamless Tube304 Seamless Stainless Steel Tubing & Hydraulic Tube etc. We can meet most ASME, ASTM, AMS, and military specifications, and can cross-reference to most international standards, including full DIN 3.1b, full 3.1/3.2 Certifcation and NACE requirements.

Sandvik Inconel 600 Seamless Tube Dimensional Range & Standard Specification

Looking for a Sandvik Inconel 600 Seamless Tube supplier that offers quality products with fast turn around times at competitive prices? If so, you’ve come to the right place. Our products, including Nickel 600 and Alloys 625, 718, seamless stainless steel and X750 are stored and pulled directly from warehouses. We stock and sell Sandvik Inconel 600 Seamless Tube, this alloy is also available in form of Flat Bar, Forging Stock, Hexagon, Plate, Round Bar, Sheet, Strip and Wire. All the alloys are high temperature/corrosion resistant alloys that are often used in the aerospace industry.

Sandvik Inconel 600 Seamless Tube
Sr. No.
Material
Size
Sch. & Swg. 
Specification
1
Sandvik Inconel 600 Seamless Tube
6.35 mm OD

To

152 mm OD 

20 Swg. 
18 Swg. 
16 Swg.
14 Swg. 
12 Swg. 
10 Swg. 
IS 
BS 
ASTM
UNS 

Trade Name Sandvik Inconel 600 Seamless Tube
In Form of Round, Coil, ‘U’ Shape etc.
In Length of  Standard & Cut length
Value Added Service Draw & Expansion as per required Size & Length
Bending 
Annealed & Pickled 
Machining Etc. 
Test Certificate  Manufacturer Test Certificate 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection .
Application  Shipping 
Offshore Construction 
Condensers 
Heat Exchangers etc. 
Specialize  Cupro Nickel Tube

Sandvik Inconel 600 Seamless Tube sizes & stock

PIPE TUBE TYPE NB SIZES SCH 5 SCH 10 SCH 40 SCH 80 SCH 160
Sandvik Inconel 600 Seamless Tube
1/8"
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
1/4"
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
3/8"
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
1/2"
available size
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
3/4"
available size
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
1"
available size
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
1 1/4"
available size
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
1 1/2"
available size
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
2"
available size
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
2 1/2"
available size
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
3"
available size
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
4"
available size
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
5"
available size
available size
available size
available size
Sandvik Inconel 600 Seamless Tube
6"
available size
available size
available size
available size

All materials supplied by L.G. Pipes and Tubes will meet or exceed ASTM, ASME, ANSI and/or API standards, per your required specifications including full documentation.
We have more than 1200 tons of Sandvik Inconel 600 Seamless Tube in ready stock for immediate dispatch in our stockyard. Also we provide value addition to the client in the form of cut to length size, slitting, shaping, and fabrication, superior finishing, marking, beveled end, specialized cap protection.

We are specialized in:

  1. Flanges according to ASTM A182 Grade F304, F304L F316L
  2. Pipes according to ASTM A312 Grade TP304, TP304L, TP3016L
  3. Fittings according to ASTM A403 Grade WP304, WP304L, WP316L

Hot Products: Type 304 | Type 304L | Type 304H | Type 316 | Type 316L | Type 316H | Type 317L | Type 321 | Type 347 | Type 410 | Type 904L | UNS S32750 Duplex | UNS S32205 Duplex | UNS S31803 Duplex

Available tube product forms

  • Straight
  • Coiled
  • Seamless
  • Seam welded and cold redrawn
  • Seam welded, cold redrawn and annealed

L.G. Pipes and Tubes only sells the highest quality Sandvik Inconel 600 Seamless Tube & stainless steel seamless tubing for use in extreme environments. Unlike welded tubing, seamless tubing is extruded from a billet and cold-drawn to finished size. This process results in a completely homogeneous tube that allows for working pressures per ASME B31.3, Process Piping Code, 20% higher than welded tubes, making seamless tubing more suitable for critical applications.

Seamless Tubing

  • Increased corrosion resistance
  • Consistent and uniform dimensions
  • Higher up-front cost, but more cost effective when defect opportunity, replacement and extensive testing of welded tubing is considered
  • Increased ASME working pressures compared to welded tubing of the same size and material

Sandvik ANSI/ASME pipe, Sandvik Bimetallic tubes, Sandvik Boiler tubes, Sandvik Capillary tubes, Sandvik Chemical injection lines, Sandvik Coiled tubing, Sandvik Composite tubes, Sandvik Condenser tubes, Sandvik Control lines, Sandvik Downhole casing, Sandvik Ethylene furnace tubes, Sandvik Evaporator tubes, Sandvik Finned tubes, Sandvik Fittings, Sandvik Flanges, Sandvik Flowline piping, Sandvik Furnace tubes, Sandvik Gasoline direct injection (GDI) tubes, Sandvik Heat exchanger tubes, Sandvik High-pressure tubes, Sandvik High-temperature tubes, Sandvik Hollow bar, Sandvik Hydraulic tubing, Sandvik Instrumentation tubing, Sandvik ISO/EN tubes, Sandvik Lance tubes, Sandvik Mechanical tubing, Sandvik Medical tubes, Sandvik Muffle tubes, Sandvik Nuclear fuel tubes, Sandvik Nuclear steam generator tubing, Sandvik Precision tubes, Sandvik Production tubing (OCTG), Sandvik Recuperator tubes, Sandvik Reheater tubes, Sandvik Riser tubes, Sandvik Scrubber tubes, Sandvik Steam generator tubes, Sandvik Stripper tubes, Sandvik Subsea tubes, Sandvik Superheater tubes, Sandvik Thermocouple tubes, Sandvik Titanium tubes, Sandvik Umbilical tubes, Sandvik Zirconium tubes

Duplex stainless steels

Sandvik grade UNS ASTM EN no. W.-nr AFNOR
Sandvik 3RE60 S31500 1.4424 1.4417 Z2CND18-05-03
Sandvik SAF 2205 S31803/S32205 1.4462 Z2CND22-05-03
Sandvik SAF 2304 S32304 1.4362 1.4362 Z2NC23-04AZ
Sandvik SAF 2707 HD S32707
Sandvik SAF 2507 S32750 1.4410

Sandvik High-alloy austenitic stainless steels and nickel alloys

Sandvik grade UNS ASTM EN steel no. W.-nr AFNOR
Sanicro 70 N06600 Alloy 600 2.4816
Sanicro 69 N06690 Alloy 690 2.4642*** 2.4642 NC30FE(RCCM)
Sanicro 41 N08825 Alloy 825 2.4858
Sanicro 30 N08800 1.4558 1.4558
Sanicro 28 N08028 1.4563 1.4563
Sandvik 2RK65 N08904 1.4539 1.4539 Z1NCDU25-20-4
254 SMO* S31254 1.4547 (1.4529)**

* 254 SMO is a trademark of Outokumpu OY.
** In brackets, nearest equivalent steel grade
*** Not applicable for tube and pipe. Only for information.

Sandvik Austenitic stainless steels

Sandvik grade UNS ASTM EN steel no. W.-nr AFNOR
Sandvik 3R12 S30403/S30400 304L/304 1.4306/1.4301 1.4306/1.4301 Z2CN18-10
Sandvik 3R60 S31603/S31600 316L/316 1.4435/1.4436 1.4435/1.4436 Z2CND17-13
Sandvik 5R75 S31635 316Ti 1.4571 1.4571 (Z6CNDT17-12)**
Sandvik 6R35 S32100/S32109 321/321H 1.4541/1.4940 1.4541/1.4878 (Z6CNT18-10)**

Sandvik Inconel 600 Seamless Tube price

Click here for stainless steel pipe price list (updated price list)

inconel المورد/ شراء 625 inconel الأنابيب
US $ 25-60 / كيلوغرام

inconel 625 سلس الأنابيب المورد
US $ 10-30 / كيلوغرام

inconel 625 الأنابيب الملحومة المورد
US $ 10-30 / كيلوغرام

ASTM A312 TP 310 Stainless Steel Welded Pipe at Factory price

[button type=”normal” target=”_self” link=”http://www.lgpipeindia.com/enquiry.html” color=”#249cd9″ bordercolor=”#0467ba” size=”default” icon=”moon-pencil” icon_color=”#fffff” fontcolor=”#fffff”]Send Inquiry[/button]

Useful Information:

Sanicro 70 (Tube and pipe, seamless)

Datasheet updated 2015-02-16 10:39:37 (supersedes all previous editions)

Sanicro 70 is an austenitic nickel-chromium-iron (NiCrFe) alloy characterized by very good resistance to carburization and nitrogen absorption and good structural stability at high temperatures. It also has good resistance to stress corrosion cracking (SCC).

Standards

  • UNS N06600
  • W.Nr. 2.4816
  • DIN NiCr 15 Fe
  • BS NA14

Product standards

  • ASTM B163, B167
  • BS 3074

Chemical composition (nominal) %

C

Si

Mn

P

S

Cr

Ni

Cu

Fe

≤0.05 0.4 0.8 ≤0.015 ≤0.015 16.5 72.5 ≤0.5 ≤10.0

Forms of supply

Seamless tube and pipe

Tube and pipe are normally supplied in the solution annealed and white-pickled condition. Small sizes, e.g. heat exchanger tubes, can also be supplied in the bright-annealed condition. 

Other forms of supply

Welding consumables

Mechanical properties

At 20 °C (68 °F)

Metric units
Condition Proof strength Tensile strength Elongation Hardness
Vickers
Rp0.2a) Rp1.0a) Rm Ab)
MPa MPa MPa %
approx.
Cold finished ≥241 ≥265 552-700 ≥35 160
Hot finished ≥205 ≥230 550-700 ≥35 160
Condition Proof strength Tensile strength Elongation Hardness
Vickers
Rp0.2a) Rp1.0a) Rm A2"
ksi ksi ksi %
approx.
Imperial units
Cold finished ≥35 ≥38 80-101 ≥35 160
Hot finished ≥30 ≥33 80-101 ≥35 160

1 MPa = 1 N/mm2
a) Rp0.2 and Rp1.0 correspond to 0.2% and 1.0 % offset yield strength, respectively.
b) Based on L0 = 5.65 ÖS0 where L0 is the original gauge length and S0 the original cross-section area.

At high temperatures

Temperature
Proof strength
Tensile strength
°C Rp0.2 Rm
MPa MPa
min. min.
Metric units
100 200 500
200 180 480
300 170 470
400 160 460
500 140 450
600
100
440
Temperature
Proof strength
Tensile strength
°F Rp0.2 Rm
ksi ksi
min. min.
Imperial units
200 29.6 73.2
400 26.0 69.6
600 24.4 67.9
800 22.4 66.3
1000 18.1 64.7
1100
14.9
63.9

Creep strength

Sanicro 70 has a creep strength which is comparable to that of AISI tp 310 (UNS S31008).

Physical properties

Density: 8.4 g/cm3, 0.30 lb/in3

Scaling temperature in air: 1175 °C, 2145 °F

Temperature, °C W/m °C Temperature, °F Btu/ft h °F
Thermal conductivity
20 13 68 7.5
100 14 200 8
200 16 400 9
300 17 600 10
400 19 800 11
500 21 1000 13
600 25 1100 15
Temperature, °C J/kg °C Temperature, °F Bru/lb °F
Specific heat capacity
20 460 68 0.11
100 480 200 0.11
200 495 400 0.12
300 510 600 0.12
400 515 800 0.12
500 525 1000 0.13
600 590 1100 0.14
Temperature, C Per °C Temperature, °F Per F
Thermal expansion, mean values in temperature ranges (x10-6)
30-100 13.5 86-200 7.5
30-200 14 86-400 8
30-300 14 86-600 8
30-400 14.5 86-800 8
30-500 15 86-1000 8.5
30-600 15.5 86-1100 8.5
Temperature, °C MPa Temperature, °F ksi
Modulus of elasticity (x103)
 20  214  68  31.0
 100  206  200  30.0
 200  202  400  29.3
 300  196  600  28.3
 400  190  800  27.4
 500  185  1000  26.6
 600  180  1200  25.5
 700  171  1400  23.9
 800  161  1600  22.1
 900  149  1800  19.9
1000 135

Corrosion resistance

General corrosion

Sanicro 70 has approximately the same resistance to organic and inorganic acids as steel of the AISI 304 type. Its resistance to sodium hydroxide is very good even at high concentrations and temperatures.

Pitting

Resistance to pitting is equal to that of steel of the AISI 304 type.

Stress corrosion cracking

Sanicro 70 has very good resistance to stress corrosion cracking, particularly in chloride-bearing solution.

Gas corrosion

Sanicro 70 has very good oxidation resistance. It can be used in:

  • Air up to 1175°C (2145°F)
  • Up to 800°C (1470°F)
  • Dry chlorine and hydrogen chloride up to about 550°C (1020°F)
  • Synthesis gas (ammonia synthesis) up to 600°C (1110°F). The resistance to nitrogen absorption, e.g. cracked ammonia at high temperatures, is very good.

Due to high nickel content the material should not be uses in reducing, sulphurous atmospheres (containing hydrogen sulphide) at temperatures above 550°C (1020°F).

Heat treatment

The tubes are delivered in heat treated condition. If another heat treatment is needed after further processing the following is recommended.

Stress relieving

800-875°C (1470-1920°F), 10-15 minutes, cooling air.

Solution annealing

950-1050°C (1740-1920°F), 5-30 minutes, rapid cooling in air or water.

Welding

The waldability of Sanicro 70 is good. Suitable fusion-welding methods are manual metal-arc welding (MMA) and gas-shielded arc welding, with the TIG and MIG methods as first choice. Preheating and post-weld heat treatment are normally not necessary.

The welding of high-nickel materials calls for high standards of cleanliness. Joint surfaces and filler metals must be free from grease, dirt, colour (pigments) and other impurities. If necessary, the welding zone shall be cleaned with a suitable solvent, e.g. acetone or alcohol.

Since Sanicro 70 has low thermal conductivity and high thermal expansion, welding must be carried out with a low heat input and with welding plans well thought out in advance, so that the deformation of the welded joints can be kept under control.

The welding of fully austenitic steels often entails the risk of hot-cracking in the weld metal, particularly if the weldment is under constraint. To reduce the cracking risk, the welding should be carried out with lowest practical heat input, <1.0 kJ/mm and interpass temperature <150°C.

Recommended filler metals for:
MIG and TIG: Sanicro 72HP or Sanicro 68HP (wire electrodes and filler wire/rods).
MMA: Sanicro 71or Sanicro 69 (covered electrodes).

Applications

Sanicro 70 has good resistance to chlorine and hydrogen chloride at high temperatures and can therefore be used in the production of chlorinated hydrocarbons, e.g. in the oxychlorination reactor and the cracking furnace in vinylchloride plants.

Sanicro 70 can also be used in wet corrosive conditions, where austenitic 18Cr/8Ni steels would be susceptible to stress corrosion cracking.

We are exporting Sandvik Inconel 600 Seamless Tube to more than 40 countries like UAE, EGYPT, TURKEY, Singapore, Malaysia, Iran, Iraq, Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait, Argentina, Palestin, Algeria, Italy, Tunisia, Oman, Mauritania, USA, Bangladesh, Lebanon, Canada, Vietnam, India, Sudan, Syria, Morocco, Libya, Jordon, and many more..

We also have our sales representatives to understand the requirements of our clients, we maintain ready stock of Sandvik Inconel 600 Seamless Tube in cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sana’a, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more..

Our worldwide presence:

Cities We Deliver To: Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwad, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Tehran, Calgary, Noida, Riyadh, Vadodara, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Thane, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, Surat, Bhopal, Ulsan, Faridabad, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo

Countries We Deliver To: India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia

Europe: Germany, Netherland, Russia Finland, Czech, Ukraine, Italy, Spain, Poland
Middle East:Iran, UAE, SA, Iraq, Qatar, Isreal, Jordan, Bahrain, Kuwait
South America:Brazil, Chile, Peru, Venezuela, Uruguay, Argentina
Africa: Egypt, South Africa, Nigeria
Central & North America:Mexico, US, Canada, Costa Rica
South East Asia and Pacific:Japan, South Korea, Singapore, Thailand, Indonesia, Australia

other brand manufacturer’s pipe & tubes also available

stainless steel pipe manufacturers

 

L.G. Pipes and Tubes Logo
L.G. Pipes and Tubes
Address:
204, Balaram Steet, Shop No.5, Balaram Bhuvan
Grant Road (E),Mumbai-400007, Maharashtra, India.
Tel: +91-22-66518819, 67437819
Email: lgpipe@gmail.com
Website: www.lgpipeindia.com
Fax: +91-22-23014879

Tags: Sandvik Inconel 600 Seamless Tube, best quality Sandvik Inconel 600 Seamless Tube, wide variety of Sandvik Inconel 600 Seamless Tube, Sandvik Inconel 600 Seamless Tube India, Sandvik Inconel 600 Seamless Tube distributor Mumbai, Sandvik Inconel 600 Seamless Tube traders, prime quality Sandvik Inconel 600 Seamless Tube, Sandvik Inconel 600 Seamless Tube exporter, Source for Sandvik Inconel 600 Seamless Tube, specialize in Sandvik Inconel 600 Seamless Tube, Sandvik Inconel 600 Seamless Tube with Test Certificate, Sandvik Inconel 600 Seamless Tube manufacturers, Sandvik Inconel 600 Seamless Tube suppliers, Sandvik Inconel 600 Seamless Tube importer, Sandvik Inconel 600 Seamless Tube exporter, Sandvik Inconel 600 Seamless Tube dealers, Sandvik Inconel 600 Seamless Tube mill, Sandvik Inconel 600 Seamless Tube price, Sandvik Inconel 600 Seamless Tube ready stock, used Sandvik Inconel 600 Seamless Tube, Sandvik Inconel 600 Seamless Tube manufacturing process, Brand Steel Pipes stockist, send your Sandvik Inconel 600 Seamless Tube requirement to our Mumbai, India office by email lgpipe@gmail.com, ISO 9001:2008, Seamless Pipes and Tubes for the Chemical Industry (Stainless Steel and Ni-based Alloys), Sandvik Sanicro 28, Sandvik Sanicro 60, Sandvik Sanicro 31HT, Sandvik Sanicro 41, Sandvik Sanicro 61, Sandvik Sanicro 70, Sandvik Sanicro 31H