ASTM B729 Alloy 20 Seamless Tube manufacturer and suppliers

Alloy 20 Pipes, Alloy 20 Tubes, Alloy 20 Fittings, Alloy 20 Rods, Alloy 20 Fasteners, Alloy 20 Plates, Alloy 20 Flanges

Manufacturer, Stockholder, Suppliers and Exporter of ASTM B729 Alloy 20 Seamless Tube, ASTM A/ASME SA B161 /B725 /B163 /B730 /B167 /B517 /B751 /B516 /B775 / B444/ B705/ B704 / B407/ B154/ B515 / B423 Monel Pipe in India

Nickel Grades: UNS N04400UNS N06600UNS N06625UNS N08020UNS N08800UNS N08810UNS N08811UNS N08825UNS N10276UNS S31254

Contents:

ASTM B729 Alloy 20 Seamless Tube

L.G. Pipes and Tubes maintains one of the world’s largest ASTM B729 Alloy 20 Seamless Tube -pipe & tubes inventories include stainless steels, duplex, super duplex, nickel & mixed alloys, carbon steels and low alloys for energy and industrial applications.

The environment management system of the company is certified according to the requirements of ISO 9001:2008, 14001, 18001 & PED. Few of the major brands we represent are Arcelor Mittal, Sumitomo, Tenaris, Benteler, Jazeera Steel, Hyundai HYSCO, Arabian Pipes Company, Sandvik, Froch, etc. Our materials are approved by Saudi ARAMCO, SABIC, SHELL, ADNOC, GASCO, PDO, KNPC, KOC, QATAR Gas, SGC etc.

Pipes are normally manufactured in either seamless or welded form. Seamless pipes are made from extruded billets and are then formed into nominal bore sizes with the various schedule wall thicknesses to suit. Welded pipes are manufactured from strip or plates. These are rolled into shape and then welded into cylindrical form of nominal bore sizes with their various schedule wall thicknesses to suit.

L.G. Pipes and Tubes offers a wide range of ASTM B729 Alloy 20 Seamless Tube, 316 Seamless Tubing316 Seamless Pipess 316l Seamless Pipe304 Seamless Tube304 Seamless Stainless Steel Tubing & Hydraulic Tube etc. We can meet most ASME, ASTM, AMS, and military specifications, and can cross-reference to most international standards, including full DIN 3.1b, full 3.1/3.2 Certifcation and NACE requirements.

ASTM B729 Alloy 20 Seamless Tube Dimensional Range & Standard Specification

Specification:

Alloy 20 Pipe & Tube
Standards Seamless Pipe & Tube
ASTM B 729
ASME SB 729

Other forms of supply

  • Welded tube and pipe
  • Welding wire and wire electrodes
  • Covered electrodes
  • Strip, annealed or cold rolled to different degrees of hardness
  • Wire, drawn or ground
  • Bar steel
  • Plate and sheet
  • Forged products
  • Cast products
  • Fittings

Origin: West Europe / Japan / Indian / USA / Korean

ASTM B729 Alloy 20 Seamless Tube Dimensional Range:

Looking for a ASTM B729 Alloy 20 Seamless Tube supplier that offers quality products with fast turn around times at competitive prices? If so, you’ve come to the right place. Our products, including Nickel 600 and Alloys 625, 718, seamless stainless steel and X750 are stored and pulled directly from warehouses. We stock and sell ASTM B729 Alloy 20 Seamless Tube, this alloy is also available in form of Flat Bar, Forging Stock, Hexagon, Plate, Round Bar, Sheet, Strip and Wire. All the alloys are high temperature/corrosion resistant alloys that are often used in the aerospace industry.

ASTM B729 Alloy 20 Seamless Tube
Sr. No.
Material
Size
Sch. & Swg. 
Specification
1
ASTM B729 Alloy 20 Seamless Tube
6.35 mm OD

To

152 mm OD 

20 Swg. 
18 Swg. 
16 Swg.
14 Swg. 
12 Swg. 
10 Swg. 
IS 
BS 
ASTM
UNS 

Trade Name ASTM B729 Alloy 20 Seamless Tube
In Form of Round, Coil, ‘U’ Shape etc.
In Length of  Standard & Cut length
Value Added Service Draw & Expansion as per required Size & Length
Bending 
Annealed & Pickled 
Machining Etc. 
Test Certificate  Manufacturer Test Certificate 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection .
Application  Shipping 
Offshore Construction 
Condensers 
Heat Exchangers etc. 
Specialize  Cupro Nickel Tube

ASTM B729 Alloy 20 Seamless Tube sizes & stock

PIPE TUBE TYPE NB SIZES SCH 5 SCH 10 SCH 40 SCH 80 SCH 160
ASTM B729 Alloy 20 Seamless Tube
1/8"
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
1/4"
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
3/8"
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
1/2"
available size
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
3/4"
available size
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
1"
available size
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
1 1/4"
available size
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
1 1/2"
available size
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
2"
available size
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
2 1/2"
available size
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
3"
available size
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
4"
available size
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
5"
available size
available size
available size
available size
ASTM B729 Alloy 20 Seamless Tube
6"
available size
available size
available size
available size

All materials supplied by L.G. Pipes and Tubes will meet or exceed ASTM, ASME, ANSI and/or API standards, per your required specifications including full documentation.
We have more than 1200 tons of ASTM B729 Alloy 20 Seamless Tube in ready stock for immediate dispatch in our stockyard. Also we provide value addition to the client in the form of cut to length size, slitting, shaping, and fabrication, superior finishing, marking, beveled end, specialized cap protection.

We are specialized in:

  1. Flanges according to ASTM A182 Grade F304, F304L F316L
  2. Pipes according to ASTM A312 Grade TP304, TP304L, TP3016L
  3. Fittings according to ASTM A403 Grade WP304, WP304L, WP316L

Hot Products: Type 304 | Type 304L | Type 304H | Type 316 | Type 316L | Type 316H | Type 317L | Type 321 | Type 347 | Type 410 | Type 904L | UNS S32750 Duplex | UNS S32205 Duplex | UNS S31803 Duplex

Available tube product forms

  • Straight
  • Coiled
  • Seamless
  • Seam welded and cold redrawn
  • Seam welded, cold redrawn and annealed

L.G. Pipes and Tubes only sells the highest quality ASTM B729 Alloy 20 Seamless Tube & stainless steel seamless tubing for use in extreme environments. Unlike welded tubing, seamless tubing is extruded from a billet and cold-drawn to finished size. This process results in a completely homogeneous tube that allows for working pressures per ASME B31.3, Process Piping Code, 20% higher than welded tubes, making seamless tubing more suitable for critical applications.

Seamless Tubing

  • Increased corrosion resistance
  • Consistent and uniform dimensions
  • Higher up-front cost, but more cost effective when defect opportunity, replacement and extensive testing of welded tubing is considered
  • Increased ASME working pressures compared to welded tubing of the same size and material

Standards

  • UNS N08028
  • ISO 4563-080-28-I
  • EN number 1.4563
  • EN name X 1 NiCrMoCu 31-27-4
  • W.Nr. 1.4563
  • DIN X 1 NiCrMoCuN 31 27 4
  • SS 2584
  • AFNOR Z1NCDU31-27-03

Mechanical Properties

Tensile Strength : Unit – ksi (MPa) , Minimum
Yeild Strength : 0.2 % Offset , Unit – ksi (MPa) , Minimum
Elongation : in 2″, Unit : % , MinimumValues as per ASTM B 729

CONDITION & SIZE TENSILE STRENGTH YEILD STRENGTH ELOGNATION
ANNEALED 80 (550) 35 (240) 30

ASTM B729 Alloy 20 Seamless Tube price

Click here for stainless steel pipe price list (updated price list)

inconel المورد/ شراء 625 inconel الأنابيب
US $ 25-60 / كيلوغرام

inconel 625 سلس الأنابيب المورد
US $ 10-30 / كيلوغرام

inconel 625 الأنابيب الملحومة المورد
US $ 10-30 / كيلوغرام

ASTM A312 TP 310 Stainless Steel Welded Pipe at Factory price

[button type=”normal” target=”_self” link=”http://www.lgpipeindia.com/enquiry.html” color=”#249cd9″ bordercolor=”#0467ba” size=”default” icon=”moon-pencil” icon_color=”#fffff” fontcolor=”#fffff”]Send Inquiry[/button]

Useful Information:

N08020 | 2.4660 | NICR20CUMO | Z2NCUD31-20AZ

Alloy 20 is alloy formulated of nickel, molybdenum, chromium and copper which equips it with distinguished resistance to acid attacks, general corrosion, crevice corrosion and pitting. The chemistry in the alloy defies the oxidizing environment that involves chlorides and sulfuric acid, nitric acid, and phosphoric acid. The alloy consists of niobium for equilibrium against sensitization delivering intergranular corrosion. The alloy has impressive mechanical properties at both nominal and extreme temperatures.

Specifications

STANDARD ALLOY 20
UNS N08020
WERKSTOFF NR. 2.4660
EN NiCr20CuMo
AFNOR Z2NCUD31-20AZ

Physical Properties

DENSITY (G/CM 3) 8.08
DENSITY (LB/IN 3) 0.292
MELTING POINT (°C) 1425
MELTING POINT (°F) 2600

Chemical Composition

ELEMENT ALLOY 20
NI 32.00 – 38.00
C 0.07 max
MN 2.00 max
P 0.045 max
S 0.035 max
SI 1.00 max
CR 19.00 – 21.00
MO 2.00 – 3.00
CU 3.00 – 4.00
NB + TA 8 x C – 1.00
FE 29.85 min*

*Calculated (Reference only)

Chemical composition (nominal) %

C Si Mn P S Cr Ni Mo Cu
≤0.020 ≤0.6 ≤2.0 ≤0.025 ≤0.010 27 31 3.5 1.0

Heat treatment

Tubes are delivered in the heat treated condition. If another heat treatment is needed after further processing, the following is recommended.

Solution annealing
1100-1160°C (2010-2120°F), 10-30 minutes, quenching in water. Thin walled tubes can also be cooled rapidly in air.

Welding

Incoloy Alloy 20 possesses good weldability. Suitable welding methods are manual metal-arc with covered electrodes and gas shielded arc welding, such as TIG and MIG. The heat input should be 1 kJ/mm maximum and the interpass temperature 150°C (300°F) maximum. A stringer bead welding technique should be used. Welding should be undertaken without preheating and, if correctly performed, there will be no need for any subsequent heat treatment. To maintain full corrosion resistance of the weld joint, welding must be followed by thorough cleaning to ensure removal of all oxides and slag particles.

Oil and gas

Sanicro28 / Alloy 20 is used for production tubing, casing and liners in deep, sour gas wells. The material is also recommended for oil wells with a corrosive environment. For these purposes, tubes are supplied cold rolled with high strength. In the solution annealed condition, Sanicro 28 / Alloy 20 is also used as piping for transporting of corrosive oil and gas and for heat exchangers in treatment facilities. Sanicro 28 wirelines are used for lowering tools and controlling instruments in deep oil and gas wells.

Fluoride-bearing media

Fluoride-bearing off-gases can form during the manufacture of phosphoric acid and mixed fertilizers. These off-gases must be disposed of for environmental reasons. Sanicro 28 is ideal for this purpose. Tests have shown it to be preferable to higher alloyed CrNiMo grades for the recovery of fluoride-bearing gypsum.

Nuclear power plants

Due to its high resistance to SCC, pitting and crevice corrosion, Sanicro 28 / Alloy 20 has been selected for heat exchangers in nuclear power plants.

Seawater and chloride-bearing cooling water

Its high resistance to pitting and crevice corrosion makes Sanicro 28 / Alloy 20 a very suitable material for seawater-carrying piping and seawater-cooled heat exchangers. This is confirmed by practical experience.

Source: Sandvik

Product standards

Seamless tube and pipe: ASTM B 668; EN 10216-5; SEW 400 (Feb 1991); SS 14 25 84;
NFA 49-217
Plate, sheet and strip: ASTM B 709, EN 10088-2; SS 14 25 84
Bar steel: EN 10088-3; SS 14 25 84
Fittings: ASTM A 403 (chemical composition and mechanical properties according to ASTM B668)

Case Study:

In 2010, an oil and gas production industry in Bahrain – Middle East, he had requirement of Alloy 20 bending Pipe. His import department imported it from a reputed company in China. However the Chinese failed in delivery as usual. We are the only company that had in stock the full quantity in India. The entire lot was eventually purchased from us. Recently we asked him about the developments , and he spoke about none, but the high quality if the pipes supply.

3 years after, our customer remembers for the quality we supply. 30 years hence, he will remember us for the same reason. QUALITY! There is no substitute.

We hope you can turn into our client, and in future we can share your experience with our visitors.

We are exporting ASTM B729 Alloy 20 Seamless Tube to more than 40 countries like UAE, EGYPT, TURKEY, Singapore, Malaysia, Iran, Iraq, Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait, Argentina, Palestin, Algeria, Italy, Tunisia, Oman, Mauritania, USA, Bangladesh, Lebanon, Canada, Vietnam, India, Sudan, Syria, Morocco, Libya, Jordon, and many more..

We also have our sales representatives to understand the requirements of our clients, we maintain ready stock of ASTM B729 Alloy 20 Seamless Tube in cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sana’a, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more..

Our worldwide presence:

Cities We Deliver To: Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwad, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Tehran, Calgary, Noida, Riyadh, Vadodara, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Thane, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, Surat, Bhopal, Ulsan, Faridabad, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo

Countries We Deliver To: India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia

Europe: Germany, Netherland, Russia Finland, Czech, Ukraine, Italy, Spain, Poland
Middle East:Iran, UAE, SA, Iraq, Qatar, Isreal, Jordan, Bahrain, Kuwait
South America:Brazil, Chile, Peru, Venezuela, Uruguay, Argentina
Africa: Egypt, South Africa, Nigeria
Central & North America:Mexico, US, Canada, Costa Rica
South East Asia and Pacific:Japan, South Korea, Singapore, Thailand, Indonesia, Australia

ASTM B729 Alloy 20 Seamless Tube brand manufacturers

stainless steel pipe manufacturers

  • Sumitomo ASTM B729 Alloy 20 Seamless Tube | Sumitomo Metals, Japan
  • Nippon ASTM B729 Alloy 20 Seamless Tube | Nippon Steel Corporation, Japan
  • Kobe ASTM B729 Alloy 20 Seamless Tube | Kobe Special Tube, Japan
  • Sanyo ASTM B729 Alloy 20 Seamless Tube | Sanyo Special Steel, Japan
  • Tubacex ASTM B729 Alloy 20 Seamless Tube | Tubacex Tubos Inoxidables S.A., Spain
  • Schoeller ASTM B729 Alloy 20 Seamless Tube | Schoeller Bleckmann, Austria
  • Seah ASTM B729 Alloy 20 Seamless Tube | Seah Steel Corporation, Korea
  • Special Metals alloys ASTM B729 Alloy 20 Seamless Tube | Special Metals alloys, USA
  • Sandvik ASTM B729 Alloy 20 Seamless Tube | Sandvik, Sweden

 

L.G. Pipes and Tubes Logo
L.G. Pipes and Tubes
Address:
204, Balaram Steet, Shop No.5, Balaram Bhuvan
Grant Road (E),Mumbai-400007, Maharashtra, India.
Tel: +91-22-66518819, 67437819
Email: lgpipe@gmail.com
Website: www.lgpipeindia.com
Fax: +91-22-23014879

Tags: ASTM B729 Alloy 20 Seamless Tube, best quality ASTM B729 Alloy 20 Seamless Tube, wide variety of ASTM B729 Alloy 20 Seamless Tube, ASTM B729 Alloy 20 Seamless Tube India, ASTM B729 Alloy 20 Seamless Tube distributor Mumbai, ASTM B729 Alloy 20 Seamless Tube traders, prime quality ASTM B729 Alloy 20 Seamless Tube, ASTM B729 Alloy 20 Seamless Tube exporter, Source for ASTM B729 Alloy 20 Seamless Tube, specialize in ASTM B729 Alloy 20 Seamless Tube, ASTM B729 Alloy 20 Seamless Tube with Test Certificate, ASTM B729 Alloy 20 Seamless Tube manufacturers, ASTM B729 Alloy 20 Seamless Tube suppliers, ASTM B729 Alloy 20 Seamless Tube importer, ASTM B729 Alloy 20 Seamless Tube exporter, ASTM B729 Alloy 20 Seamless Tube dealers, ASTM B729 Alloy 20 Seamless Tube mill, ASTM B729 Alloy 20 Seamless Tube price, ASTM B729 Alloy 20 Seamless Tube ready stock, used ASTM B729 Alloy 20 Seamless Tube, ASTM B729 Alloy 20 Seamless Tube manufacturing process, Brand Steel Pipes stockist, send your ASTM B729 Alloy 20 Seamless Tube requirement to our Mumbai, India office by email lgpipe@gmail.com, ISO 9001:2008, Click here to send us your requirements of ASTM B729 Alloy 20 Seamless Tube. 46+ tons in ready stock, order small (1 piece) or large quantity.